Small molecule protein assembly modulators with pan-cancer therapeutic efficacy.

Two structurally unrelated small molecule chemotypes, represented by compounds PAV-617 and PAV-951, with antiviral activity in cell culture against Mpox virus (formerly known as monkeypox virus) and human immunodeficiency virus (HIV) respectively, were studied for anti-cancer efficacy. Each exhibited apparent pan-cancer cytotoxicity with reasonable pharmacokinetics. Non-toxicity is demonstrated in a non-cancer cell line and in mice at doses achieving drug exposure at active concentrations.

Novel Chemoresistive Sensors for Indoor CO Monitoring: Validation in an Operational Environment.

Health and safety considerations of indoor occupants in enclosed spaces are crucial for building management which involves the strict control and monitoring of carbon dioxide levels to maintain acceptable air quality standards. For this study, we developed a wireless, noninvasive, and portable platform for the continuous monitoring of carbon dioxide concentration in enclosed environments, i.e.

Fabrication of a Highly NO-Sensitive Gas Sensor Based on a Defective ZnO Nanofilm and Using Electron Beam Lithography.

Hazardous substances produced by anthropic activities threaten human health and the green environment. Gas sensors, especially those based on metal oxides, are widely used to monitor toxic gases with low cost and efficient performance. In this study, electron beam lithography with two-step exposure was used to minimize the geometries of the gas sensor hotplate to a submicron size in order to reduce the power consumption, reaching 100 °C with 0.

Insights into the Sensing Mechanism of a Metal-Oxide Solid Solution via Diffuse Reflectance Infrared Fourier Transform Spectroscopy.

Recently, the influence of Nb addition in the oxide solid solution of Sn and Ti was investigated with regard to the morphological, structural and electrical properties for the production of chemoresistive gas sensors. (Sn,Ti,Nb)O-based sensors showed promising features for ethanol monitoring in commercial or industrial settings characterized by frequent variation in relative humidity. Indeed, the three-metal solid solution highlighted a higher response level vs.

New Approach for the Detection of Sub-ppm Limonene: An Investigation through Chemoresistive Metal-Oxide Semiconductors.

R-(+)-limonene, one of the major constituents of citrus oils, is a monoterpene that is widely used as a fragrance additive in cosmetics, foods, and industrial solvents. Nowadays, its detection mainly relies on bulky and expensive analytical methods and only a few research works proved its revelation through affordable and portable sensors, such as electrochemical and quartz crystal microbalance sensors. In response to the demand for effective miniaturized sensing devices to be integrated into Internet of Things systems, this study represents a pioneering investigation of chemoresistive gas sensor capabilities addressed to R-(+)-limonene detection.

Functionalization of Indium Oxide for Empowered Detection of CO over an Extra-Wide Range of Concentrations.

Carbon capture, storage, and utilization have become familiar terms when discussing climate change mitigation actions. Such endeavors demand the availability of smart and inexpensive devices for CO monitoring. To date, CO detection relies on optical properties and there is a lack of devices based on solid-state gas sensors, which can be miniaturized and easily made compatible with Internet of Things platforms.

Trunk injection delivery of dsRNA for RNAi-based pest control in apple trees.

Background: RNA interference (RNAi) is a promising new approach for controlling insect pests without the use of synthetic pesticides. Trunk injection is a delivery system for woody plants that harnesses the vascular system of the tree to transport materials to the tree canopy. Full size apple trees were injected with double-stranded RNA (dsRNA), and season-long leaf samples were taken to measure the vascular mobility and temporal persistence of dsRNA, using quantitative reverse transcription polymerase chain reaction (qRT-PCR).

Elucidating the Ambient Stability and Gas Sensing Mechanism of Nickel-Decorated Phosphorene for NO Detection: A First-Principles Study.

In the field of layered two-dimensional functional materials, black phosphorus has attracted considerable attention in many applications due to its outstanding electrical properties. It has experimentally shown superior chemical sensing performance for the room temperature detection of NO, highlighting high sensitivity at a ppb level. Unfortunately, pristine black phosphorus demonstrated an unstable functionality due to the fast degradation of the material when exposed to the ambient atmosphere.

Design of a Metal-Oxide Solid Solution for Sub-ppm H Detection.

Hydrogen is largely adopted in industrial processes and is one of the leading options for storing renewable energy. Due to its high explosivity, detection of H has become essential for safety in industries, storage, and transportation. This work aims to design a sensing film for high-sensitivity H detection.

Air Stable Nickel-Decorated Black Phosphorus and Its Room-Temperature Chemiresistive Gas Sensor Capabilities.

In the rapidly emerging field of layered two-dimensional functional materials, black phosphorus, the P-counterpart of graphene, is a potential candidate for various applications, e.g., nanoscale optoelectronics, rechargeable ion batteries, electrocatalysts, thermoelectrics, solar cells, and sensors.

Development of a dedicated instrumentation for electrical and thermal characterization of chemiresistive gas sensors.

This work presents the design and validation of a measuring instrumentation for an easy, complete, and tunable characterization of chemiresistive gas sensors based on metal-oxide semiconductors. The equipment, described in depth both as hardware and as software, was designed to monitor the electrical behavior of gas sensors in controlled thermodynamic conditions. The main goal of this setup is to synchronize the electrical characterization with different measuring conditions, i.

A systematic review of the psychometric properties of the Jebsen-Taylor Hand Function Test (JTHFT).

This systematic review of the literature aimed to identify studies examining the psychometric properties of the Jebsen-Taylor Hand Function Test (JTHFT) in various international populations on. The search was conducted in MEDLINE, SCOPUS, CINAHL and Web Of Science, with no restrictions on publication period, the country in which the study was conducted, or the age of the patients. Eligible studies were selected on the basis of inclusion criteria and data were extracted.

First-Principles Study of Electronic Conductivity, Structural and Electronic Properties of Oxygen-Vacancy-Defected SnO₂.

The use of computer simulations has become almost essential for prediction and interpretation of device's performance. In gas sensing field, the simulation of specific conditions, which determine the physical-chemical properties of widely used metal oxide semiconductors, can be used to investigate the performance of gas sensors based on these kinds of materials. The aim of this work was to evaluate the physical-chemical properties of tin dioxide employed for environmental and health gas sensing application and to investigate the influence of oxygen vacancies on its properties by means of density functional theory.

Nanostructured SmFeO Gas Sensors: Investigation of the Gas Sensing Performance Reproducibility for Colorectal Cancer Screening.

Among the various chemoresistive gas sensing properties studied so far, the sensing response reproducibility, i.e., the capability to reproduce a device with the same sensing performance, has been poorly investigated.

Nanostructured Chemoresistive Sensors for Oncological Screening and Tumor Markers Tracking: Single Sensor Approach Applications on Human Blood and Cell Samples.

Preventive screening does not only allow to preemptively intervene on pathologies before they can harm the host; but also to reduce the costs of the intervention itself; boosting the efficiency of the NHS (National Health System) by saving resources for other purposes. To improve technology advancements in this field; user-friendly yet low-cost devices are required; and various applications for gas sensors have been tested and proved reliable in past studies. In this work; cell cultures and blood samples have been studied; using nanostructured chemoresistive sensors; to both verify if this technology can reliably detect tumor markers; and if correlations between responses from tumor line metabolites and the screening outcomes on human specimens could be observed.

Crystalline Microporous Organosilicates with Reversed Functionalities of Organic and Inorganic Components for Room-Temperature Gas Sensing.

A deepened investigation on an innovative organic-inorganic hybrid material, referred to as ECS-14 (where ECS = Eni carbon silicates), revealed the possibility to use them as gas sensors. Indeed, among ECS phases, the crystalline state and the hexagonal microplateletlike morphology characteristic of ECS-14 seemed favorable properties to obtain continuous and uniform films. ECS-14 phase was used as functional material in screen-printable compositions and was thus deposited by drop coating for morphological, structural, thermal, and electrical characterizations.

Metal Sulfides as Sensing Materials for Chemoresistive Gas Sensors.

This work aims at a broad overview of the results obtained with metal-sulfide materials in the field of chemoresistive gas sensing. Indeed, despite the well-known electrical, optical, structural and morphological features previously described in the literature, metal sulfides present lack of investigation for gas sensing applications, a field in which the metal oxides still maintain a leading role owing to their high sensitivity, low cost, small dimensions and simple integration, in spite of the wide assortment of sensing materials. However, despite their great advantages, metal oxides have shown significant drawbacks, which have led to the search for new materials for gas sensing devices.

Experimental design for TBT quantification by isotope dilution SPE-GC-ICP-MS under the European water framework directive.

In Europe the maximum allowable concentration for tributyltin (TBT) compounds in surface water has been regulated by the water framework directive (WFD) and daughter directive that impose a limit of 0.2 ng L(-1) in whole water (as tributyltin cation). Despite the large number of different methodologies for the quantification of organotin species developed in the last two decades, standardised analytical methods at required concentration level do not exist.

Chemoresistive gas sensors for the detection of colorectal cancer biomarkers.

Numerous medical studies show that tumor growth is accompanied by protein changes that may lead to the peroxidation of the cell membrane with consequent emission of volatile organic compounds (VOCs) by breath or intestinal gases that should be seen as biomarkers for colorectal cancer (CRC). The analysis of VOCs represents a non-invasive and potentially inexpensive preliminary screening technique. An array of chemoresistive gas sensors based on screen-printed metal oxide semiconducting films has been selected to discriminate gases of oncological interest, e.

A kinetic comparison of asparagine synthetase isozymes from higher plants.

Four previously identified maize asparagine synthetase (AsnS) genes and a soy AsnS gene have been cloned and expressed in Escherichia coli. The enzymes have been purified and kinetically characterized. The plant AsnS proteins were expressed mainly in the inclusion bodies although small amounts of one form (ZmAsnS2) were recovered in the soluble fraction.

Structural organization of NadADelta(351-405), a recombinant MenB vaccine component, by its physico-chemical characterization at drug substance level.

The physico-chemical characterization of NadADelta(351-405), a recombinant protein discovered by reverse vaccinology, component of a candidate vaccine against Neisseria meningitidis serotype B is presented. Analytical methods like mass spectrometry, electrophoresis, optical spectroscopy and SEC-MALLS have been applied to unveil the structure of NadADelta(351-405), and to evaluate Product-Related Substances. Moreover, analysis of the protein after intentional denaturation has been applied in order to challenge the chosen methods and to determine their appropriateness and specificity.

Use of zirconium oxychloride to neutralize HF in the microwave-assisted acid dissolution of ceramic glazes for their chemical analysis by ICP-OES.

The use of a zirconium compound (ZrOCl(2)) to neutralize HF in the microwave-assisted acid dissolution of ceramic glazes for their chemical analysis was tested. Zr is a strong complexing agent for the fluorine ion and permits the determination of those elements which would form insoluble fluorides. The use of Zr implies strong spectral interferences and a high salt content; however, we found that at least 27 elements can be measured with low detection limits, and satisfactory precision and accuracy.

Physicochemical characterisation of glycoconjugate vaccines for prevention of meningococcal diseases.

Bacterial capsular polysaccharides covalently linked to an appropriate carrier protein represent the best tool to induce a protective immune response against a wide range of bacterial diseases, such as meningococcal infections. We describe here the physico-chemical characterisation of glycoconjugate molecules designed to prepare a vaccine against Neisseria meningitidis serogroups A, C, W135 and Y. The use of a selective conjugation chemistry resulted in well characterised, reproducible and traceable glycoconjugate that can be consistently manufactured at large scale.