Sustainability assessment of biofuel and value-added product from organic fraction of municipal solid waste.

The current study aims to examine the techno-economic and environmental assessment of biorefinery development within a circular bioeconomy context by using an organic fraction of municipal solid waste (OFMSW) by extraction of lipids, carbohydrates, and proteins with 98, 51 and 62 % by mass of conversion efficiency and yield recovery, and value-added fractions production as well. Fatty acid methyl ester (biodiesel) and glycerol (biofuel) were produced by applying transesterification process, and the remaining biomass was converted into biocrude oil by thermal liquefication. The biorefinery using 613 kg of OFMSW produced biodiesel, glycerol, and bioethanol with 126 litter, 14.

Advancement in total hip implant: a comprehensive review of mechanics and performance parameters across diverse novelties.

The UK's National Joint Registry (NJR) and the American Joint Replacement Registry (AJRR) of 2022 revealed that total hip replacement (THR) is the most common orthopaedic joint procedure. The NJR also noted that 10-20% of hip implants require revision within 1 to 10 years. Most of these revisions are a result of aseptic loosening, dislocation, implant wear, implant fracture, and joint incompatibility, which are all caused by implant geometry disparity.

Design and Performance Evaluation of a Novel Spiral Head-Stem Trunnion for Hip Implants Using Finite Element Analysis.

With an expectation of an increased number of revision surgeries and patients receiving orthopedic implants in the coming years, the focus of joint replacement research needs to be on improving the mechanical properties of implants. Head-stem trunnion fixation provides superior load support and implant stability. Fretting wear is formed at the trunnion because of the dynamic load activities of patients, and this eventually causes the total hip implant system to fail.

Surface Acoustic Wave (SAW) Sensors for Hip Implant: A Numerical and Computational Feasibility Investigation Using Finite Element Methods.

In this paper, a surface acoustic wave (SAW) sensor for hip implant geometry was proposed for the application of total hip replacement. A two-port SAW device was numerically investigated for implementation with an operating frequency of 872 MHz that can be used in more common radio frequency interrogator units. A finite element analysis of the device was developed for a lithium niobate (LiNBO3) substrate with a Rayleigh velocity of 3488 m/s on COMSOL Multiphysics.

A Review of Biomaterials and Associated Performance Metrics Analysis in Pre-Clinical Finite Element Model and in Implementation Stages for Total Hip Implant System.

Total hip replacement (THR) is a common orthopedic surgery technique that helps thousands of individuals to live normal lives each year. A hip replacement replaces the shattered cartilage and bone with an implant. Most hip implants fail after 10-15 years.