Evaluation of nano-confined catalytic oxidation air purification technology on eliminating marijuana chemicals and odour.

The novel air purification technology, Nano-Confined Catalytic Oxidation (NCCO), has been proven to be effective at eliminating air pollutants. With the increasing legalization and decriminalization of medicinal and recreational cannabis and related products, respectively, in many countries and jurisdictions around the world, concerns have been raised about indoor air quality from smoking cannabis products, such as marijuana, which produce gaseous pollutants and intense odour. In this study, NCCO technology has been evaluated for its effectiveness in reducing key marijuana concentrations in polluted indoor air by direct measurements and odour intensity assessments by human volunteers.

of Silicon-on-Insulator (SOI) strip waveguide resonator sensor.

Evanescent field sensors have shown promise for biological sensing applications. In particular, Silicon-on-Insulator (SOI)-nano-photonic based resonator sensors have many advantages for lab-on-chip diagnostics, including high sensitivity for molecular detection and compatibility with CMOS foundries for high volume manufacturing. We have investigated the optimum design parameters within the fabrication constraints of Multi-Project Wafer (MPW) foundries that result in the highest sensitivity for a resonator sensor.

Rheological study of hyaluronic acid derivatives.

The viscoelastic properties of four novel, low molecular weight hyaluronic acid derivatives were investigated and compared to the parent hyaluronic acid compound. Briefly, all derivatives were synthesized by first deacetylating the parent hyaluronic acid. One sample was left as such, while two others were reacytelated.

Osteoarthritic synovial fluid and correlations with protein concentration.

Background: Osteoarthritis is a common, localized joint disease that causes pain, stiffness and reduced mobility. The effects of osteoarthritis on the extensional rheology of synovial fluid in the knees are not fully understood and consequently require further study.

Objective: The purpose of this work is to study the extensional rheology of osteoarthritic synovial fluid and to investigate a possible correlation between synovial fluid protein concentration and extensional rheology.

Osteoarthritic synovial fluid rheology and correlations with protein concentration.

Background: Osteoarthritis is a common, localized joint disease that causes pain, stiffness and reduced mobility. Osteoarthritis is particularly common in the knees. The effects of osteoarthritis on the rheology of synovial fluid in the knees are not fully understood and consequently require further study.

Silicon-on-insulator sensors using integrated resonance-enhanced defect-mediated photodetectors.

A resonance-enhanced, defect-mediated, ring resonator photodetector has been implemented as a single unit biosensor on a silicon-on-insulator platform, providing a cost effective means of integrating ring resonator sensors with photodetectors for lab-on-chip applications. This method overcomes the challenge of integrating hybrid photodetectors on the chip. The demonstrated responsivity of the photodetector-sensor was 90 mA/W.

Assessment of type II diabetes mellitus using irregularly sampled measurements with missing data.

Diabetes mellitus is one of the leading diseases in the developed world. In order to better regulate blood glucose in a diabetic patient, improved modelling of insulin-glucose dynamics is a key factor in the treatment of diabetes mellitus. In the current work, the insulin-glucose dynamics in type II diabetes mellitus can be modelled by using a stochastic nonlinear state-space model.

Performance of ultra-thin SOI-based resonators for sensing applications.

This work presents simulation and experimental results of ultra-thin optical ring resonators, having larger Evanescent Field (EF) penetration depths, and therefore larger sensitivities, as compared to conventional Silicon-on-Insulator (SOI)-based resonator sensors. Having higher sensitivities to the changes in the refractive indices of the cladding media is desirable for sensing applications, as the interactions of interest take place in this region. Using ultra-thin waveguides (<100 nm thick) shows promise to enhance sensitivity for both bulk and surface sensing, due to increased penetration of the EF into the cladding.

Use of Molecular Dynamics for the Refinement of an Electrostatic Model for the In Silico Design of a Polymer Antidote for the Anticoagulant Fondaparinux.

Molecular dynamics (MD) simulations results are herein incorporated into an electrostatic model used to determine the structure of an effective polymer-based antidote to the anticoagulant fondaparinux. In silico data for the polymer or its cationic binding groups has not, up to now, been available, and experimental data on the structure of the polymer-fondaparinux complex is extremely limited. Consequently, the task of optimizing the polymer structure is a daunting challenge.

A biomechanical model to assess the contribution of pelvic musculature weakness to the development of stress urinary incontinence.

A biomechanical model of the female pelvic support system was developed to explore the contribution of pelvic floor muscle defect to the development of stress urinary incontinence (SUI). From a pool of 135 patients, clinical data of 26 patients with pelvic muscular defect were used in modelling. The model was employed to estimate the parameters that describe the stiffness properties of the vaginal wall and ligament tissues for individual patients.

Pharmacokinetic-Pharmacodynamic Modeling of Metformin for the Treatment of Type II Diabetes Mellitus.

Metformin is an antihyperglycemic agent commonly used for the treatment of Type II diabetes mellitus. However, its effects on patients are derived usually from clinical experiments. In this study, a dynamic model of Type II diabetes mellitus with the treatment of metformin is proposed.

Chemometric approach for improving VCSEL-based glucose predictions.

Optical methods are one of the painless and promising techniques that can be used for blood glucose predictions for diabetes patients. The use of thermally tunable vertical cavity surface-emitting lasers (VCSELs) as the light source to obtain blood absorption spectra, along with the multivariate technique partial least squares for analysis and glucose estimation, has been demonstrated. With further improvements by using data preprocessing and two VCSELs, we have achieved a clinically acceptable level in the physiological range in buffered solutions.

Simpler noninstrumented batch and semicontinuous cultures provide mammalian cell kinetic data comparable to continuous and perfusion cultures.

Perfusion culture optimization in multiple noninstrumented small-scale flasks allows reduced expense and time associated with process development. These cultures normally use a different process mode because at small scales it is not practical to retain the cells for medium perfusion. In this work, the kinetics of growth, nutrient consumption, metabolite, and product formation were compared in spinner cultures operated in batch, semicontinuous, chemostat, and perfusion modes.

How to prepare engineers in medicine and biology?

Biomedical Engineering education has become very popular in the past two decades. New biomedical engineering programs have been developed to prepare students for this emerging field of study. Due to its highly multidisciplinary and interdisciplinary nature, combined with the fact that many engineering students have limited life sciences backgrounds, preparing graduates for an engineering career incorporating medicine and biology is not straight forward.

Optimization and control of perfusion cultures using a viable cell probe and cell specific perfusion rates.

Consistent perfusion culture production requires reliable cell retention and control of feed rates. An on-line cell probe based on capacitance was used to assay viable biomass concentrations. A constant cell specific perfusion rate controlled medium feed rates with a bioreactor cell concentration of approximately 5 x 10(6) cells mL(-1).