Bismuth-doped fiber laser at 1.32 μm mode-locked by single-walled carbon nanotubes.

Bismuth-doped fiber is a promising active media for pulsed lasers operating in various spectral regions. In this paper, we report on a picosecond mode-locked laser at a wavelength of 1.32 μm, based on a phosphosilicate fiber doped with bismuth.

Formation of laser-active centers in bismuth-doped high-germania silica fibers by thermal treatment.

The effect of thermal annealing on the luminescent and laser properties of high-germania-core silicate fibers doped with bismuth was investigated. We studied the behavior of optical absorption assigned to the bismuth-related active centers associated with germanium as well as the behavior of unsaturable absorption in annealed fibers with respect to the Bi content. The dependence of the increment of the active center content on the Bi concentration in the annealed fibers was obtained.

NALM-based bismuth-doped fiber laser at 1.7 μm.

We demonstrate, to the best of our knowledge, the first bismuth-doped fiber laser operating at 1.7 μm mode-locked by means of Kerr nonlinearity. The laser setup has a figure-of-eight all-fiber design with a nonlinear amplifying loop mirror (NALM) and yields 17 ps pulses with a 3.

Dissipative soliton resonance in Bismuth-doped fiber laser.

We experimentally demonstrate the generation of dissipative soliton resonance (DSR) in a passively mode-locked Bi-doped fiber ring laser based on nonlinear polarization rotation (NPR) technique. The DSR with the central wavelength of 1169.5 nm has a repetition rate of 343.

Identification of Nanocrystalline Inclusions in Bismuth-Doped Silica Fibers and Preforms.

The nature of nanocrystalline inclusions and dopant distribution in bismuth-doped silicate fibers and preforms are studied by scanning and transmission electron microscopy, and energy and wavelength-dispersive X-ray microanalysis. The core compositions are Bi:SiO2, Bi:Al2O3-SiO2, Bi:GeO2-SiO2, Bi:Al2O3-GeO2-SiO2, and Bi:P2O5-Al2O3-GeO2-SiO2. Nanocrystals of metallic Bi, Bi2O3, SiO2, GeO2, and Bi4(GeO4)3 are observed in these glasses.

Narrowband random lasing in a Bismuth-doped active fiber.

Random fiber lasers operating via the Rayleigh scattering (RS) feedback attract now a great deal of attention as they generate a high-quality unidirectional laser beam with the efficiency and performance comparable and even exceeding those of fiber lasers with conventional cavities. Similar to other random lasers, both amplification and random scattering are distributed here along the laser medium being usually represented by a kilometers-long passive fiber with Raman gain. However, it is hardly possible to utilize normal gain in conventional active fibers as they are usually short and RS is negligible.

A 23-dB bismuth-doped optical fiber amplifier for a 1700-nm band.

It is now almost twenty-five years since the first Erbium-Doped Fiber Amplifier (EDFA) was demonstrated. Currently, the EDFA is one of the most important elements widely used in different kinds of fiber-optic communication systems. However, driven by a constantly increasing demand, the network traffic, growing exponentially over decades, will lead to the overload of these systems ("capacity crunch") because the operation of the EDFA is limited to a spectral region of 1530-1610 nm.

1700 nm dispersion managed mode-locked bismuth fiber laser.

We demonstrate the first 1.7 μm bismuth-doped fiber laser generating ultrashort pulses via passive mode-locking. Pulse operation has been achieved for both anomalous and normal dispersion of the laser cavity owing to broadband characteristics of carbon nanotube saturable absorber.

Single-frequency Bismuth-doped fiber laser with quasi-continuous self-sweeping.

Generation of regular pulses of linearly polarized radiation with periodic self-induced laser line sweeping by ~10 nm near central wavelength of ~1460 nm has been demonstrated for the first time in an all-fiber Bismuth laser without any tuning element. It has been shown that the radiation of each pulse is single-frequency, and the pulse-to-pulse frequency shift is as low as 1 MHz corresponding to one intermode interval in 100-m long laser cavity. The measured intra-pulse frequency chirp is below 1 MHz while the pulses are long (~10 μs) and overlapping.

Photobleaching effect in bismuth-doped germanosilicate fibers.

Photoinduced reduction of absorption (photobleaching) in bismuth-doped germanosilicate fibers irradiated with 532-nm laser has been observed for the first time. It was demonstrated that bismuth-related active centers having the absorption bands at wavelengths of 1400 and 1700 nm degrade under photoexcitation at 532 nm. The photobleaching process rate was estimated using conventional stretched exponential technique.

Bismuth-doped optical fibers and fiber lasers for a spectral region of 1600-1800 nm.

Bismuth-doped optical fibers and fiber lasers operating in 1625-1775 nm range have been developed for the first time to the best of our knowledge. Now the existing bismuth-doped lasers, including the result presented in this Letter, can cover O, E, S, C, L, and U telecommunication bands. In addition, new data on the nature of the bismuth-related active center were obtained and discussed.

A 1.33 µm picosecond pulse generator based on semiconductor disk mode-locked laser and bismuth fiber amplifier.

We demonstrate that a combination of ultrafast wafer bonded semiconductor disk laser and a bismuth-doped fiber amplifier provides an attractive design for high power 1.33 µm tandem hybrid systems. Over 0.

Anti-Stokes luminescence in bismuth-doped silica and germania-based fibers.

Luminescence excitation spectra of active centers in bismuth-doped vitreous SiO(2) and vitreous GeO(2) optical fibers under the two-step excitation have been obtained for the first time. The results revealed only one bismuth-related IR active center formed in each of these fibers. The observed IR luminescence bands at 1430 nm (1650 nm) and 830 nm (950 nm), yellow-orange (red) band at 580 nm (655 nm), violet (blue) band at 420 nm (480 nm) belong to this bismuth-related active center in the vitreous SiO(2) (vitreous GeO(2)), correspondingly.

Light transmission in negative curvature hollow core fiber in extremely high material loss region.

In this paper we demonstrate the light transmission in a spectral range of 2.5 to 7.9 µm through a silica negative curvature hollow core fiber (NCHCF) with a cladding consisting of eight capillaries.

Delocalization of femtosecond radiation in silicon.

The processes, induced by local action of the IR femtosecond laser pulse (λ=1.2 μm, τ=250 fs) in the bulk of silicon monocrystal, are studied. Infrared femtosecond interferometry was for the first time applied for visualization of beam propagation inside opaque materials.

Fabrication of Bragg gratings in microstructured and step index Bi-SiO2 optical fibers using an ArF laser.

An ArF excimer laser was used to fabricate Bragg gratings in fibers with Bi-SiO(2) core and microstructured or F-doped claddings without fiber presensitization. Average and modulated refractive index changes of 2.7 × 10(-4) and 1.

Superfluorescent 1.44 μm bismuth-doped fiber source.

The first bismuth-doped superfluorescent fiber source (SFS) operating at 1.44 μm was developed. An SFS maximum output power in the double-pass backward configuration reached 82 mW with a fairly high efficiency of 31% at a pump wavelength of 1310 nm.

Mechanisms of optical losses in Bi:SiO2 glass fibers.

The mechanisms of optical losses in bismuth-doped silica glass (Bi:SiO(2)) and fibers were studied. It was found that in the fibers of this composition the up-conversion processes occur even at bismuth concentrations lower than 0.02 at.

Mid-infrared supercontinuum generation in tapered chalcogenide fiber for producing octave-spanning frequency comb around 3 μm.

We demonstrate mid-infrared (mid-IR) supercontinuum generation (SCG) with instantaneous bandwidth from 2.2 to 5 μm at 40 dB below the peak, covering the wavelength range desirable for molecular spectroscopy and numerous other applications. The SCG occurs in a tapered As(2)S(3) fiber prepared by in-situ tapering and is pumped by femtosecond pulses from the subharmonic of a mode-locked Er-doped fiber laser.

Microfluorescence analysis of nanostructuring inhomogeneity in optical fibers with embedded gallium oxide nanocrystals.

A spectroscopic protocol is proposed to implement confocal microfluorescence imaging to the analysis of microinhomogeneity in the nanocrystallization of the core of fibers belonging to a new kind of broadband fiber amplifier based on glass with embedded nanocrystals. Nanocrystallization, crucial for achieving an adequate light emission efficiency of transition metal ions in these materials, has to be as homogeneous as possible in the fiber to assure optical amplification. This requirement calls for a sensitive method for monitoring nanostructuring in oxide glasses.

Photosensitivity and stress changes of Ge-free Bi-Al doped silica optical fibers under ArF excimer laser irradiation.

The photosensitivity of germanium free Bi-Al-doped silica fibers with different bismuth concentrations was investigated using ArF excimer laser radiation at 193 nm and fiber grating formation. For the fiber with the highest bismuth concentration maximum refractive index changes of 2.2 × 10(-3) and 2.

Fabrication and thermal decay of fiber Bragg gratings in pristine and H2-loaded Bi-Al co-doped optical fibers.

A cw-244-nm-Ar(+) laser was used to fabricate Bragg gratings in pristine and H(2)-loaded Bi-Al-SiO(2) optical fibers with index changes as high as 3.6 × 10(-4) and 19.3 × 10(-4), respectively.

Demonstration of CO2-laser power delivery through chalcogenide-glass fiber with negative-curvature hollow core.

A technologically simple optical fiber cross-section structure with a negative-curvature hollow-core has been proposed for the delivery of the CO2 laser radiation. The structure was optimized numerically and then realized using Te20As30Se50 (TAS) chalcogenide glass. Guidance of the 10.

Demonstration of a waveguide regime for a silica hollow--core microstructured optical fiber with a negative curvature of the core boundary in the spectral region > 3.5 μm.

We present a numerical and experimental demonstration of a waveguide regime in a broad band spectral range for the hollow core microstructured optical fibers (HC MOFs) made of silica with a negative curvature of the core boundary. It is shown that HC MOFs with the cladding consisting only of one row of silica capillaries allows to guide light from the near to mid infrared despite of high material losses of silica in this spectral region. Such result can be obtained by a special arrangement of cladding capillaries which leads to a change in the sign of the core boundary curvature.

Optical gain and laser generation in bismuth-doped silica fibers free of other dopants.

Luminescence emission and excitation spectra of bismuth-doped silica optical fibers free of other dopants have been obtained to construct an emission-excitation map in a wide wavelength range of 400-1600 nm. The main low-lying energy levels of the bismuth active centers in such fibers have been determined. For the first time (to our knowledge), optical gain and lasing have been obtained in such fibers.