Responsive 3D Printed Microstructures Based on Collagen Folding and Unfolding.

Mimicking extracellular matrices holds great potential for tissue engineering in biological and biomedical applications. A key compound for the mechanical stability of these matrices is collagen, which also plays an important role in many intra- and intercellular processes. Two-photon 3D laser printing offers structuring of these matrices with subcellular resolution.

4D Printing of Liquid Crystal Emulsions for Smart Structures with Multiple Functionalities.

3D printing, and more recently 4D printing, has emerged as a transformative technology for fabricating structures with complex geometries and responsive properties. However, employing functional colloidal solutions as inks for printing remains unexplored. In this work, we present a novel and versatile 4D printing approach for fabricating functional and complex-shaped objects using polymerizable liquid crystal (LC) emulsion droplets.

Quantification of Synergistic Two-Color Covalent Bond Formation.

The emergence of highly wavelength resolved reactivity information for complex photochemical reaction processes allows the establishment of multi-color reaction modes. One particularly powerful mode is the synergistic two-color reaction, where two colors of light have to be present in the same volume element to either enable or enhance photochemical reactivity that leads to a specific photoproduct. Herein, we introduce a two-color synergistic photochemical reaction system based on a diaryl indenone epoxide (DIO) photoswitch and the cis-to-trans isomerization of a bridged ring-strained azobenzene (SA), which respond to ultraviolet (365 nm) and visible light (430 nm), respectively, with different rates, forming a well-defined heterocyclic photoadduct, DIOSA, that we structurally confirm via single crystal x-ray diffraction (SXRD).

Alignment and actuation of liquid crystals via 3D confinement and two-photon laser printing.

Liquid crystalline (LC) materials are especially suited for the preparation of active three-dimensional (3D) and 4D microstructures using two-photon laser printing. To achieve the desired actuation, the alignment of the LCs has to be controlled during the printing process. In most cases studied before, the alignment relied on surface modifications and complex alignment patterns and concomitant actuation were not possible.

Digital Light 3D Printing of Double Thermoplastics with Customizable Mechanical Properties and Versatile Reprocessability.

Digital light processing (DLP) is a 3D printing technology offering high resolution and speed. Printable materials are commonly based on multifunctional monomers, resulting in the formation of thermosets that usually cannot be reprocessed or recycled. Some efforts are made in DLP 3D printing of thermoplastic materials.

Printing Green: Microalgae-Based Materials for 3D Printing with Light.

Microalgae have emerged as sustainable feedstocks due to their ability to fix CO during cultivation, rapid growth rates, and capability to produce a wide variety of metabolites. Several microalgae accumulate lipids in high concentrations, especially triglycerides, along with lipid-soluble, photoactive pigments such as chlorophylls and derivatives. Microalgae-derived triglycerides contain longer fatty acid chains with more double bonds on average than vegetable oils, allowing a higher degree of post-functionalization.

Minimal-Invasive 3D Laser Printing of Microimplants in Organismo.

Multi-photon 3D laser printing has gathered much attention in recent years as a means of manufacturing biocompatible scaffolds that can modify and guide cellular behavior in vitro. However, in vivo tissue engineering efforts have been limited so far to the implantation of beforehand 3D printed biocompatible scaffolds and in vivo bioprinting of tissue constructs from bioinks containing cells, biomolecules, and printable hydrogel formulations. Thus, a comprehensive 3D laser printing platform for in vivo and in situ manufacturing of microimplants raised from synthetic polymer-based inks is currently missing.

Multimaterial 3D Laser Printing of Cell-Adhesive and Cell-Repellent Hydrogels.

Here, a straightforward method is reported for manufacturing 3D microstructured cell-adhesive and cell-repellent multimaterials using two-photon laser printing. Compared to existing strategies, this approach offers bottom-up molecular control, high customizability, and rapid and precise 3D fabrication. The printable cell-adhesive polyethylene glycol (PEG) based material includes an Arg-Gly-Asp (RGD) containing peptide synthesized through solid-phase peptide synthesis, allowing for precise control of the peptide design.

Characteristics and long-term kinetics of an azobenzene derivative and a donor-acceptor Stenhouse adduct as orthogonal photoswitches.

Light-triggered molecular switches are extensively researched for their applications in medicine, chemistry and material science and, if combined, particularly for their use in multifunctional smart materials, for which orthogonally, individually, addressable photoswitches are needed. In such a multifunctional mixture, the switching properties, efficiencies and the overall performance may be impaired by undesired mutual dependences of the photoswitches on each other. Within this study, we compare the performance of the pure photoswitches, namely an azobenzene derivative (Azo) and a donor-acceptor Stenhouse adduct (DASA), with the switching properties of their mixture using time-resolved temperature-dependent UV/VIS absorption spectroscopy, time-resolved IR absorption spectroscopy at room temperature and quantum mechanical calculations to determine effective cross sections, switching kinetics as well as activation energies of thermally induced steps.

Recent Advances in Multi-Photon 3D Laser Printing: Active Materials and Applications.

Since the pioneering work of Kawata and colleagues in 1997, multi-photon 3D laser printing, also known as direct laser writing, has made significant advancements in a wide range of fields. Moreover, the development and commercialization of photocurable inks for this technique have expanded rapidly. One of the current trends is the transition from static to active printable materials, often referred to as 4D microprinting, which enables a new degree of control in the printed systems.

Understanding the Optical Properties of Doped and Undoped 9-Armchair Graphene Nanoribbons in Dispersion.

Graphene nanoribbons are one-dimensional stripes of graphene with width- and edge-structure-dependent electronic properties. They can be synthesized bottom-up in solution to obtain precise ribbon geometries. Here we investigate the optical properties of solution-synthesized 9-armchair graphene nanoribbons (9-aGNRs) that are stabilized as dispersions in organic solvents and further fractionated by liquid cascade centrifugation (LCC).

Photochemically Activated 3D Printing Inks: Current Status, Challenges, and Opportunities.

3D printing with light is enabled by the photochemistry underpinning it. Without fine control over the ability to photochemically gate covalent bond formation by the light at a certain wavelength and intensity, advanced photoresists with functions spanning from on-demand degradability, adaptability, rapid printing speeds, and tailored functionality are impossible to design. Herein, recent advances in photoresist design for light-driven 3D printing applications are critically assessed, and an outlook of the outstanding challenges and opportunities is provided.

Recyclable photoresins for light-mediated additive manufacturing towards Loop 3D printing.

Additive manufacturing (AM) of polymeric materials enables the manufacturing of complex structures for a wide range of applications. Among AM methods vat photopolymerization (VP) is desired owing to improved efficiency, excellent surface finish, and printing resolution at the micron-scale. Nevertheless, the major portion of resins available for VP are based on systems with limited or negligible recyclability.

3D Printing Hierarchically Nano-Ordered Structures.

Natural materials are composed of a limited number of molecular building blocks and their exceptional properties are governed by their hierarchical structure. However, this level of precision is unattainable with current state-of-the-art materials for 3D printing. Herein, new self-assembled printable materials based on block copolymers (BCPs) enabling precise control of the nanostructure in 3D are presented.

Two Functions from a Single Photoresist: Tuning Microstructure Degradability from Light-Stabilized Dynamic Materials.

A photoresist-based on a light-stabilized dynamic material driven by an out-of-equilibrium photo-Diels-Alder reaction of triazolinediones with naphthalenes-whose ability to intrinsically degrade postprinting can be tuned by a simple adjustment of laser intensity during 3D laser lithography is introduced. The resist's ability to form stable networks under green light irradiation that degrade in the dark is transformed into a tunable degradable 3D printing material platform. In-depth characterization of the printed microstructures via atomic force microscopy before and during degradation reveals the high dependency of the final structures' properties on the writing parameters.

Two-Photon Laser Microprinting of Highly Ordered Nanoporous Materials Based on Hexagonal Columnar Liquid Crystals.

Nanoporous materials relying on supramolecular liquid crystals (LCs) are excellent candidates for size- and charge-selective membranes. However, whether they can be manufactured using printing technologies remained unexplored so far. In this work, we develop a new approach for the fabrication of ordered nanoporous microstructures based on supramolecular LCs using two-photon laser printing.

Chain-Length-Dependent Photolysis of -Nitrobenzyl-Centered Polymers.

Herein, we demonstrate that the photochemical cleavage of linear polymers containing a midchain photocleavable moiety strongly depends on the chain length. Based on an -nitrobenzyl (NB) difunctional reversible addition-fragmentation chain-transfer agent, well-defined poly(methyl acrylate)s ( = 1.59-67.

Wavelength-Resolved PhotoATRP.

The careful mapping of photoinduced reversible-deactivation radical polymerizations (RDRP) is a prerequisite for their applications in soft matter materials design. Here, we probe the wavelength-dependent behavior of photochemically induced atom transfer radical polymerization (ATRP) using nanosecond pulsed-laser polymerization (PLP). The photochemical reactivities at identical photon fluxes of methyl acrylate in terms of conversion, number-average molecular weight, and dispersity of the resulting polymers are mapped against the absorption spectrum of the copper(II) catalyst in the range of 305-550 nm.

UV-induced photolysis of polyurethanes.

Waste production associated with the use of non-degradable materials in packaging is a growing cause of environmental concern, with the polyurethane (PU) class being notorious for their lack of degradability. Herein, we incorporate photosensitive ortho-Nitrobenzyl units into PUs to achieve controllable photodegradability. We performed their photolysis in solution and thin films which can inform the design of degradable adhesives.

Mechanical stimulation of single cells by reversible host-guest interactions in 3D microscaffolds.

Many essential cellular processes are regulated by mechanical properties of their microenvironment. Here, we introduce stimuli-responsive composite scaffolds fabricated by three-dimensional (3D) laser lithography to simultaneously stretch large numbers of single cells in tailored 3D microenvironments. The key material is a stimuli-responsive photoresist containing cross-links formed by noncovalent, directional interactions between β-cyclodextrin (host) and adamantane (guest).