Antibacterial Coatings of Poly(ethylenimine)/Poly(l-lactide)-Grafted Hyaluronic Acid Multilayers Surface-Functionalized with Bacteriophages.

The infestation of tissue after implantation is a major problem as a bacterial biofilm can form on the surface of the implants, leading to implant-associated infections (IAIs). One approach to prevent such IAI is to apply antibacterial coatings consisting of polyelectrolyte multilayers (PEM) and bacteriophages (PHAGs). PEM were constructed by alternately adsorbing oppositely charged polyelectrolytes on a substrate according to the layer-by-layer concept.

Surface Topology of Redox- and Thermoresponsive Nanogel Droplets.

Hydrogels are usually depicted as a homogenous polymer block with a distinct surface. While defects in the polymer structure are looked into frequently, structural irregularities on the hydrogel surface are often neglected. In this work, thin hydrogel layers of ≈100 nm thickness (nanogels) are synthesized and characterized for their structural irregularities, as they represent the surface of macrogels.

Sulfur-Rich Polyimide/TiO Hybrid Materials with a Tunable Refractive Index.

High refractive index (RI) polyimide/titania nanoparticle hybrid materials were synthesized and characterized in this study. The polyimide synthesis took place via the conventional polycondensation process following the preparation of poly(amic acid), and the nanoparticles were incorporated using an sol-gel process. Thin films of the polyimide/titania nanoparticle hybrids were prepared by optimizing the coating conditions using a spin coater.

Monitoring Cell Adhesion on Polycaprolactone-Chitosan Films with Varying Blend Ratios by Quartz Crystal Microbalance with Dissipation.

A detailed understanding of the cell adhesion on polymeric surfaces is required to improve the performance of biomaterials. Quartz crystal microbalance with dissipation (QCM-D) as a surface-sensitive technique has the advantage of label-free and real-time monitoring of the cell-polymer interface, providing distinct signal patterns for cell-polymer interactions. In this study, QCM-D was used to monitor human fetal osteoblastic (hFOB) cell adhesion onto polycaprolactone (PCL) and chitosan (CH) homopolymer films as well as their blend films (75:25 and 25:75).

Influence of the Atmosphere on the Wettability of Polymer Brushes.

Polymer brushes, i.e., end-tethered polymer chains on substrates, are sensitive to adaptation, e.

β-Sheet Structure Formation within Binary Blends of Two Spider Silk Related Peptides.

Intrinsically disordered proteins (IDPs) play an important role in molecular biology and medicine because their induced folding can lead to so-called conformational diseases, where β-amyloids play an important role. Still, the molecular folding process into the different substructures, such as parallel/antiparallel or extended β-sheet/crossed β-sheet is not fully understood. The recombinant spider silk protein eADF4(Cx) consisting of repeating modules C, which are composed of a crystalline (pep-c) and an amorphous peptide sequence (pep-a), can be used as a model system for IDP since it can assemble into similar structures.

Tailored Polyelectrolyte Multilayer Systems by Variation of Polyelectrolyte Composition and EDC/NHS Cross-Linking: Physicochemical Characterization and In Vitro Evaluation.

The layer-by-layer (LbL) self-assembly technique is an effective method to immobilize components of the extracellular matrix (ECM) such as collagen and heparin onto, e.g., implant surfaces/medical devices with the aim of forming polyelectrolyte multilayers (PEMs).

Stretchable Thin Film Mechanical-Strain-Gated Switches and Logic Gate Functions Based on a Soft Tunneling Barrier.

Mechanical-strain-gated switches are cornerstone components of material-embedded circuits that perform logic operations without using conventional electronics. This technology requires a single material system to exhibit three distinct functionalities: strain-invariant conductivity and an increase or decrease of conductivity upon mechanical deformation. Herein, mechanical-strain-gated electric switches based on a thin-film architecture that features an insulator-to-conductor transition when mechanically stretched are demonstrated.

Enhancing sub-bandgap external quantum efficiency by photomultiplication for narrowband organic near-infrared photodetectors.

Detection of electromagnetic signals for applications such as health, product quality monitoring or astronomy requires highly responsive and wavelength selective devices. Photomultiplication-type organic photodetectors have been shown to achieve high quantum efficiencies mainly in the visible range. Much less research has been focused on realizing near-infrared narrowband devices.

Surface Preconditioning Influences the Antifouling Capabilities of Zwitterionic and Nonionic Polymer Brushes.

Polymer brushes not only represent emerging surface platforms for numerous bioanalytical and biological applications but also create advanced surface-tethered systems to mimic real-life biological processes. In particular, zwitterionic and nonionic polymer brushes have been intensively studied because of their extraordinary resistance to nonspecific adsorption of biomolecules (antifouling characteristics) as well as the ability to be functionalized with bioactive molecules. However, the relation between antifouling behavior in real-world biological media and structural changes of polymer brushes induced by surface preconditioning in different environments remains unexplored.

A New Measuring System for the Determination of the Ice Adhesion Strength on Smooth Surfaces.

To gain knowledge about cause-effect relationships for the adhesion of ice on surfaces with different chemical groups, we wanted to study the effect of thin polymer layers on the ice adhesion strength. To minimize the effect of roughness, smooth substrates that have generally relatively low ice adhesion strengths were chosen. To be able to obtain highly reproducible values for the region of low ice adhesion and to measure small differences of ice adhesion at surfaces with different chemical compositions, a new measuring system for the determination of the ice adhesion strength which is based on a modified spin-coater was developed.

Amphiphilic Block Copolymer Micelles in Selective Solvents: The Effect of Solvent Selectivity on Micelle Formation.

We investigated the micellar behavior of a series of asymmetric polystyrene-block-poly(4-vinylpyridine) (PS--P4VP) block copolymers in different P4VP-selective alcoholic solvents. The micellar behavior was further correlated with the spectroscopic ellipsometry results obtained on swelling of PS and P4VP polymer films in the corresponding solvent vapors. The time-resolved (in situ) dynamic light scattering (DLS) measurements, in combination with (ex situ) electron microscopy imaging, revealed information about the aggregation state of PS--P4VP BCP in different alcohols and the effect of heat treatment.

Free Polyethylenimine Enhances Substrate-Mediated Gene Delivery on Titanium Substrates Modified With RGD-Functionalized Poly(acrylic acid) Brushes.

Substrate mediated gene delivery (SMD) is a method of immobilizing DNA complexes to a substrate via covalent attachment or nonspecific adsorption, which allows for increased transgene expression with less DNA compared to traditional bolus delivery. It may also increase cells receptivity to transfection via cell-material interactions. Substrate modifications with poly(acrylic) acid (PAA) brushes may improve SMD by enhancing substrate interactions with DNA complexes via tailored surface chemistry and increasing cellular adhesion via moieties covalently bound to the brushes.

Interactions of bioactive molecules with thin dendritic glycopolymer layers.

The authors report on highly swellable, stable layers of spherical dendritic glycopolymers, composed of hyperbranched poly(ethylene imine) (PEI) as core and two different maltose shells (A = dense shell and B = open shell). These glycopolymers are cross-linked and attached with poly(ethylene--maleic anhydride) (PEMA) or citric acid on SiO substrates. The swelling and adsorption of biomolecules were analyzed by spectroscopic ellipsometry and quartz crystal microbalance with dissipation.

Biofunctionalization of Titanium Substrates Using Nanoscale Polymer Brushes with Cell Adhesion Peptides.

The grafting of polymer brushes to substrates is a promising method to modify surface properties such as wettability and the affinity toward proteins and cells for applications in microelectronics, biomedical devices, and sensors. Poly(acrylic) acid (PAA) brushes are of high interest because of their stimuli-responsive behavior and the presence of carboxy (COOH) groups, which allow for immobilization of bioactive molecules. The "grafting-to" approach results in homogeneous and well-defined polymer brushes, but, although grafting-to has been demonstrated with PAA brushes on silicon (Si) substrates, it has not been performed on biocompatible materials such as titanium (Ti).

Bioinspired thermoresponsive nanoscaled coatings: Tailor-made polymer brushes with bioconjugated arginine-glycine-aspartic acid-peptides.

The development of bioengineered surface coatings with stimuli-responsive properties is beneficial for a number of biomedical applications. Environmentally responsive and switchable polymer brush systems have a great potential to create such smart biointerfaces. This study focuses on the bioconjugation of cell-instructive peptides, containing the arginine-glycine-aspartic acid tripeptide sequence (RGD motif), onto well-defined polymer brush films.

Salt Sensitivity of the Thermoresponsive Behavior of PNIPAAm Brushes.

We report investigations on the salt sensitivity of the thermoresponsive behavior of PNIPAAm brushes applying the quartz crystal microbalance coupled with spectroscopic ellipsometry technique. This approach enables a detailed study of the optical and mechanical behavior of the polymer coatings. Additional conclusions can be drawn from the difference between both techniques due to a difference in the contrast mechanism of both methods.

In Situ Monitoring of Linear RGD-Peptide Bioconjugation with Nanoscale Polymer Brushes.

Bioinspired materials mimicking the native extracellular matrix environment are promising for biotechnological applications. Particularly, modular biosurface engineering based on the functionalization of stimuli-responsive polymer brushes with peptide sequences can be used for the development of smart surfaces with biomimetic cues. The key aspect of this study is the in situ monitoring and analytical verification of the biofunctionalization process on the basis of three complementary analytical techniques.

Adsorption of enzymes to stimuli-responsive polymer brushes: Influence of brush conformation on adsorbed amount and biocatalytic activity.

Polyelectrolyte brushes can be utilized to immobilize enzymes on macroscopic surfaces. This report investigates the influence of the pH value of the surrounding medium on the amount and the activity of enzymes adsorbed to poly(2-vinylpyridine) and poly(acrylic acid) brushes, as well as the creation of thermoresponsive biocatalytically active coatings via the adsorption of enzymes onto a mixed brush consisting of a polyelectrolyte and temperature-sensitive poly(N-isopropylacryl amide). Spectroscopic ellipsometry and attenuated total reflection-Fourier transform infrared spectroscopy are used to monitor the adsorption process.

In Situ Infrared Ellipsometry for Protein Adsorption Studies on Ultrathin Smart Polymer Brushes in Aqueous Environment.

The protein-adsorbing and -repelling properties of various smart nanometer-thin polymer brushes containing poly(N-isopropylacrylamide) and poly(acrylic acid) with high potential for biosensing and biomedical applications are studied by in situ infrared-spectroscopic ellipsometry (IRSE). IRSE is a highly sensitive nondestructive technique that allows protein adsorption on polymer brushes to be investigated in an aqueous environment as external stimuli, such as temperature and pH, are varied. These changes are relevant to conditions for regulation of protein adsorption and desorption for biotechnology, biocatalysis, and bioanalytical applications.

Nanostructured Biointerfaces: Nanoarchitectonics of Thermoresponsive Polymer Brushes Impact Protein Adsorption and Cell Adhesion.

Controlling the reversibility, quantity, and extent of biomolecule interaction at interfaces has a significant relevance for biomedical and biotechnological applications, because protein adsorption is always the first step when a solid surface gets in contact with a biological fluid. Polymer brushes, composed of end-tethered linear polymers with sufficient grafting density, are very promising to control and alter interactions with biological systems because of their unique structure and distinct collaborative response to environmental changes. We studied protein adsorption and cell adhesion at polymer brush substrates which consisted of poly(N-isopropylacrylamide) (PNIPAAm), having a lower critical solution temperature (LCST), to control bioadsorptive processes by changing the environmental temperature.

Tunable Hydrophilic or Amphiphilic Coatings: A "Reactive Layer Stack" Approach.

Thin films with tunable properties are very interesting for potential applications as functional coatings with, for example, anti-icing or improved easy-to-clean properties. A novel "reactive layer stack" approach was developed to create covalently grafted mono- and multilayers of poly(glycidyl methacrylate)/poly(tert-butyl acrylate) diblock copolymers. Because these copolymers contain poly(glycidyl methacrylate) blocks they behave as self-cross-linking materials after creation of acrylic acid functionalities by splitting off the tert-butyl units.

Temperature-sensitive swelling of poly(N-isopropylacrylamide) brushes with low molecular weight and grafting density.

Temperature-sensitive poly(N-isopropylacrylamide) (PNIPAAm) brushes with different molecular weights M(n) and grafting densities σ were prepared by the "grafting-to" method. Changes in their physicochemical properties according to temperature were investigated with the help of in situ spectroscopic ellipsometry and in situ attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectroscopy. Brush criteria indicate a transition between a brush conformation below the lower critical solution temperature (LCST) and an intermediate to mushroom conformation above the LCST.

Protein adsorption on and swelling of polyelectrolyte brushes: A simultaneous ellipsometry-quartz crystal microbalance study.

With a coupled spectroscopic ellipsometry-quartz crystal microbalance with dissipation (QCM-D) experimental setup, quantitative information can be obtained about the amount of buffer components (water molecules and ions) coupled to a poly(acrylic acid) (PAA) brush surface in swelling and protein adsorption processes. PAA Guiselin brushes with more than one anchoring point per single polymer chain were prepared. For the swollen brushes a high amount of buffer was found to be coupled to the brush-solution interface in addition to the content of buffer inside the brush layer.

In situ studies on the switching behavior of ultrathin poly(acrylic acid) polyelectrolyte brushes in different aqueous environments.

The pH-dependent switching of a poly(acrylic acid) (PAA) polyelectrolyte brush was investigated in situ using infrared spectroscopic ellipsometry (IRSE). The brush was synthesized by a "grafting to" procedure on silicon substrate with a native oxide layer. The overall thickness of the PAA brush in the dry state was approximately 5 nm.