A Geometric Approach for the Calculation of the Nonrandomness Factor Using Computational Chemistry.

The nonrandomness factor (α) is a parameter related to the polarity (and consequent randomness of spatial orientation) of the molecules and is generally fixed between 0.20 and 0.47 since no technique has been developed so far for its accurate estimation.

Water Purification Using Choline-Amino Acid Ionic Liquids: Removal of Amoxicillin.

Antibiotics are the main active pharmaceutical ingredients (APIs) for the treatment and prevention (prophylaxis) of bacterial infections, for which they are essential for health preservation. However, depending on the target bacterial strain, an efficient treatment may imply weeks of continuous intake of antibiotics, whose unmetabolized fraction ends up in the wastewater system by human and animal excreta. The presence of these chemical compounds in wastewater is known to damage aquatic ecosystems and cause antibiotic resistance of pathogenic agents, which threatens the future application of these medicines.

Extraction of Gallic Acid and Ferulic Acid for Application in Hair Supplements.

Food supplements based on antioxidants and vitamins are often prescribed to correct inefficiencies in the human diet and delay diseases such as premature aging and alopecia (temporary or permanent hair loss), given the free radical scavenging activity of these biomolecules. By reducing the concentration of reactive oxygen species (ROS), which promote abnormal hair follicle cycling and morphology, follicle inflammation and oxidative stress are reduced, minimising the effects of these health issues. Gallic acid (GA), which is significantly present in gallnuts and in pomegranate root bark, and ferulic acid (FA), commonly found in brown rice and coffee seeds, are very important antioxidants for the preservation of hair colour, strength and growth.

Extraction of Polyphenols and Vitamins Using Biodegradable ATPS Based on Ethyl Lactate.

The growing human population, together with the inefficient use of natural resources, has been dramatically increasing the production of food waste, which poses serious economic, environmental, and social problems. Being so, it is necessary to increase the efficiency of food consumption so as to reduce its waste and to convert the remaining residues into societal benefits. Since this biowaste is rich in polyphenols and vitamins, it could become the feedstock for the production of important value-added compounds for the pharmaceutical (e.

Thermal Analysis of Binary Mixtures of Imidazolium, Pyridinium, Pyrrolidinium, and Piperidinium Ionic Liquids.

Ionic liquids (ILs) are being widely studied due to their unique properties, which make them potential candidates for conventional solvents. To study whether binary mixtures of pure ionic liquids provide a viable alternative to pure ionic liquids for different applications, in this work, the thermal analysis and molar heat capacities of five equimolar binary mixtures of ionic liquids based on imidazolium, pyridinium, pyrrolidinium, and piperidinium cations with dicyanamide, trifluoromethanesulfonate, and bis(trifluoromethylsulfonyl)imide anions have been performed. Furthermore, two pure ionic liquids based on piperidinium cation have been thermally characterized and the heat capacity of one of them has been measured.

New β-galactosidase producers with potential for prebiotic synthesis.

β-Galactosidases (EC 3.2.1.

Dissolution and fractionation of nut shells in ionic liquids.

The aim of this work was to study the dissolution of raw peanut and chestnut shells in ionic liquids. Dissolution of raw biomass up to 7wt% was achieved under optimized operatory conditions. Quantification of polysaccharides dissolved through quantitative Cq NMR revealed extractions of the cellulosic material to ionic liquids as high as 87%.

Biocatalytic Approaches Using Lactulose: End Product Compared with Substrate.

Lactulose is a lactose-based carbohydrate with well-known prebiotic effect and recognized medical applications. Currently, the commercially available lactulose is chemically synthesized. Nevertheless, the process leads to low yields and high levels of by-products.

Stability and kinetic behavior of immobilized laccase from Myceliophthora thermophila in the presence of the ionic liquid 1-ethyl-3-methylimidazolium ethylsulfate.

The use of ionic liquids (ILs) as reaction media for enzymatic reactions has increased their potential because they can improve enzyme activity and stability. Kinetic and stability properties of immobilized commercial laccase from Myceliophthora thermophila in the water-soluble IL 1-ethyl-3-methylimidazolium ethylsulfate ([emim][EtSO4 ]) have been studied and compared with free laccase. Laccase immobilization was carried out by covalent binding on glyoxyl-agarose beads.

Recovery of Peniophora cinerea laccase using aqueous two-phase systems composed by ethylene oxide/propylene oxide copolymer and potassium phosphate salts.

Aqueous two-phase systems (ATPSs) composed by UCON (ethylene oxide/propylene oxide copolymer) and potassium phosphate salts were for the first time evaluated in the recovery of Peniophora cinerea laccase from complex fermented medium. The ATPSs were obtained by combining the random copolymer UCON with KH2PO4, potassium phosphate buffer pH 7 or K2HPO4. According to the results, protein partition occurred predominantly toward the saline phase (bottom phase) of the ATPSs, while some contaminants such as pigments partitioned mainly to the top phase.

Solubility of sugars and sugar alcohols in ionic liquids: measurement and PC-SAFT modeling.

Biorefining processes using ionic liquids (ILs) require proper solubility data of biomass-based compounds in ILs, as well as an appropriate thermodynamic approach for the modeling of such data. Carbohydrates and their derivatives such as sugar alcohols represent a class of compounds that could play an important role in biorefining. Thus, in this work, the pure IL density and solubility of xylitol and sorbitol in five different ILs were measured between 288 and 339 K.

Immobilization of laccase on modified silica: stabilization, thermal inactivation and kinetic behaviour in 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid.

Laccase was immobilized on modified silica carrier. The immobilization conditions, pH and enzyme concentration were optimized. Operational stability of 10 reaction cycles showed that immobilized laccase in buffer was stable, presenting an activity loss <30%.

Laccase production by free and immobilized mycelia of Peniophora cinerea and Trametes versicolor: a comparative study.

The production of laccase by immobilized mycelia of Peniophora cinerea and Trametes versicolor was studied. In an initial stage, experimental assays were performed in Erlenmeyer flasks using free and immobilized mycelium, and the performance of the fungal strains to produce the enzyme was compared. Both fungi adhered into the support material (a synthetic fiber), growing not only on the surface but also in the interspaces of the fibers.

Green coconut fiber: a novel carrier for the immobilization of commercial laccase by covalent attachment for textile dyes decolourization.

Commercial laccase formulation was immobilized on modified green coconut fiber silanized with 3-glycidoxypropyltrimethoxysilane, aiming to achieve a cheap and effective biocatalyst. Two different strategies were followed: one point (pH 7.0) and multipoint (pH 10.

Interference of some aqueous two-phase system phase-forming components in protein determination by the Bradford method.

The interference of some specific aqueous two-phase system (ATPS) phase-forming components in bovine serum albumin (BSA) determination by the Bradford method was investigated. For this purpose, calibration curves were obtained for BSA in the presence of different concentrations of salts and polymers. A total of 19 salts [Na₂SO₄, (NH₄)₂SO₄, MgSO₄, LiSO₄, Na₂HPO₄, sodium phosphate buffer (pH 7.

Predicting hydration Gibbs energies of alkyl-aromatics using molecular simulation: a comparison of current force fields and the development of a new parameter set for accurate solvation data.

The Gibbs energy of hydration is an important quantity to understand the molecular behavior in aqueous systems at constant temperature and pressure. In this work we review the performance of some popular force fields, namely TraPPE, OPLS-AA and Gromos, in reproducing the experimental Gibbs energies of hydration of several alkyl-aromatic compounds--benzene, mono-, di- and tri-substituted alkylbenzenes--using molecular simulation techniques. In the second part of the paper, we report a new model that is able to improve such hydration energy predictions, based on Lennard Jones parameters from the recent TraPPE-EH force field and atomic partial charges obtained from natural population analysis of density functional theory calculations.

Studies of laccase from Trametes versicolor in aqueous solutions of several methylimidazolium ionic liquids.

Stability and kinetic behavior of laccase from Trametes versicolor in the presence of several ionic liquids from the methylimidazolium family have been investigated. In general laccase stability diminished as the size of the alkylic substitute in the methylimidazolium ring increased. Higher concentrations of ionic liquids caused more destabilization than lower ones.

Using molecular simulation to predict solute solvation and partition coefficients in solvents of different polarity.

A methodology is proposed for the prediction of the Gibbs energy of solvation (Δ(Solv)G) based on MD simulations. The methodology is then used to predict Δ(Solv)G of four solutes (namely propane, benzene, ethanol and acetone) in several solvents of different polarities (including n-hexane, n-hexadecane, ethylbenzene, 1-octanol, acetone and water) while testing the validity of the TraPPE force field parameters. Excellent agreement with experimental data is obtained, with average deviations of 0.

Study of the alkyl chain length on laccase stability and enzymatic kinetic with imidazolium ionic liquids.

The activity and stability of laccase and their kinetic mechanisms in water soluble ionic liquids (ILs): 1-butyl-3-methyl imidazolium chloride [C(4)mim][Cl], 1-octyl-3-methyl imidazolium chloride [C(8)mim][Cl], and 1-decyl-3-methyl imidazolium chloride [C(10)mim][Cl] were investigated. The results show that an IL concentration up to 10% is satisfactory for initial laccase activity at pH 9.0.

1-Octanol/Water Partition Coefficients of n-Alkanes from Molecular Simulations of Absolute Solvation Free Energies.

The 1-octanol/water partition coefficient is an important thermodynamic variable usually employed to understand and quantify the partitioning of solutes between aqueous and organic phases. It finds widespread use in many empirical correlations to evaluate the environmental fate of pollutants as well as in the design of pharmaceuticals. The experimental evaluation of 1-octanol/water partition coefficients is an expensive and time-consuming procedure, and thus, theoretical estimation methods are needed, particularly when a physical sample of the solute may not yet be available, such as in pharmaceutical screening.

Treatment and kinetic modelling of a simulated dye house effluent by enzymatic catalysis.

Biocatalytic treatment of a synthetic dye house effluent, simulating a textile wastewater containing various reactive dyestuffs (Reactive Yellow 15, Reactive Red 239 and Reactive Black 5) and auxiliary chemicals, was investigated in a batch reactor using a commercial laccase. A high decolourisation (above 86%) was achieved at the maximum wavelength of Reactive Black 5. The decolourisation at the other dyes wavelengths (above 63% for RY15 and around 41% for RR239) and the total decolourisation based on all the visible spectrum (around 55%) were not so good, being somewhat lower than in the case of a mixture of the dyes (above 89% for RB5, 77% for RY15, 68% for RR239 and above 84% for total decolourisation).

Temperature and solvent effects in the solubility of some pharmaceutical compounds: Measurements and modeling.

In this work, pure solvent solubilities of drugs, such as paracetamol, allopurinol, furosemide and budesonide, measured in the temperature range between 298.2-315.2K are presented.

Solubilities of biologically active phenolic compounds: measurements and modeling.

Aqueous solubilities of natural phenolic compounds from different families (hydroxyphenyl, polyphenol, hydroxybenzoic, and phenylpropenoic) were experimentally obtained. Measurements were performed on tyrosol and ellagic, protocatechuic, syringic, and o-coumaric acids, at five different temperatures (from 288.2 to 323.

Modeling the discoloration of a mixture of reactive textile dyes by commercial laccase.

Degradation of a mixture of three reactive textile dyes (Reactive Black 5, Reactive Yellow 15 and Reactive Red 239), simulating a real textile effluent, by commercial laccase, was investigated in a batch reactor. The discoloration was appraised as a percentage of the absorbance reduction at the wavelength of maximum absorbance for each dye and as total color removal based in all visible spectrum. A significantly high discoloration was achieved in both cases, indicating the applicability of this method for textile wastewater treatment.

Application of statistical experimental methodology to optimize reactive dye decolourization by commercial laccase.

Three-level Box-Behnken factorial design with three factors (pH, temperature and enzyme concentration) combined with response surface methodology (RSM) was applied to optimize the dye degradation of reactive red 239 (RR239), reactive yellow 15 (RY15) and reactive blue 114 (RB114) dyes by commercial laccase. Mathematical models were developed for each dye showing the effect of each factor and their interactions on colour removal. The model predicted for RY15 that a decolourization above 90% (after 24h) could be obtained when the enzyme concentration, temperature and pH were set at 109.