Reactive Vapor-Phase Inhibitors for Area-Selective Depositions at Tunable Critical Dimensions.

Area-selective depositions (ASD) take advantage of the chemical contrast between material surfaces in device fabrication, where a film can be selectively grown by chemical vapor deposition on metal versus a dielectric, for instance, and can provide a path to nontraditional device architectures as well as the potential to improve existing device fabrication schemes. While ASD can be accessed through a variety of methods, the incorporation of reactive moieties in inhibitors presents several advantages, such as increasing thermal stability and limiting precursor diffusion into the blocking layer. Alkyne-terminated small molecule inhibitors (SMIs)─propargyl, dipropargyl, and tripropargylamine─were evaluated as metal-selective inhibitors.

Additive Lithography-Organic Monolayer Patterning Coupled with an Area-Selective Deposition.

The combination of area-selective deposition (ASD) with a patternable organic monolayer provides a versatile additive lithography platform, enabling the generation of a variety of nanoscale feature geometries. Stearate hydroxamic acid self-assembled monolayers (SAMs) were patterned with extreme ultraviolet (λ = 13.5 nm) or electron beam irradiation and developed with ASD to achieve line space patterns as small as 50 nm.

Imaging thin films of nanoporous low-k dielectrics: comparison between ultramicrotomy and focused ion beam preparations for transmission electron microscopy.

Ultramicrotomy, the technique of cutting nanometers-thin slices of material using a diamond knife, was applied to prepare transmission electron microscope (TEM) specimens of nanoporous poly(methylsilsesquioxane) (PMSSQ) thin films. This technique was compared to focused ion beam (FIB) cross-section preparation to address possible artifacts resulting from deformation of nanoporous microstructure during the sample preparation. It was found that ultramicrotomy is a successful TEM specimen preparation method for nanoporous PMSSQ thin films when combined with low-energy ion milling as a final step.