In vitro wear resistance of conventional and flowable composites containing various filler types after thermomechanical loading.

Objective: To comparatively assess the wear resistance of conventional and flowable composites containing different filler types using thermomechanical chewing simulation.

Materials And Methods: Six different composite resin materials were used: a conventional and flowable composite from each of three manufacturers respectively classified by different filler characterizations: (1), a nanohybrid conventional (G-aenial Posterior, GC) and flowable (G-aenial Universal Injectable, GC), (2) a nanofilled conventional (Filtek One Bulk-fill Restorative, 3M) and flowable (Filtek Ultimate Flow, 3M), and submicron-filled conventional (Estelite Posterior Quick, Tokuyama) and flowable (Estelite Bulk-Fill Flow, Tokuyama). The buccal surfaces of extracted human premolars were planarly abraded and used as control (n = 12).

The prevalence and predictive factors of dentine hypersensitivity among adults in Turkey.

Aim: This study sought to determine the prevalence of dentine hypersensitivity (DH) among adults in Turkey. Also, to ascertain the association between DH and both etiological predictors and demographic patient characteristics.

Material Method: Using a questionnaire and thermal and evaporative tests, 259 women and 209 men in the age range of 18 to 72 were analyzed.

Clinical performance of high-viscosity glass ionomer and resin composite on minimally invasive occlusal restorations performed without rubber-dam isolation: a two-year randomised split-mouth study.

Objective: The aim of this clinical trial was to evaluate the 2-year clinical performances of high-viscosity glass ionomer and nanohybrid resin composite restorations performed without rubber dam isolation.

Materials And Methods: Occlusal carious lesions on the right and left mandibular second molars of 56 patients (26 female, 30 male patients) were restored in a split-mouth design. High-viscosity glass ionomer (Hv-GIC) (Equia, GC) and nanohybrid resin composite (GrandioSO, Voco) were used as restorative materials.

A Randomized, Controlled, Split-mouth Trial Evaluating the Clinical Performance of High-viscosity Glass-ionomer Restorations in Noncarious Cervical Lesions: Two-year Results.

Purpose: To compare the two-year clinical performance of high-viscosity glass ionomer (Hv-GIC) restorations in noncarious cervical lesions with nanohybrid composite restorations applied with a three-step etch-and-rinse adhesive (E&Ra/nanoC).

Materials And Methods: One hundred thirty-four noncarious cervical lesions were included and assigned to two groups according to the split-mouth design. The cervical lesions in the experimental group were restored with an Hv-GIC (Equia, GC), while a nanohybrid composite (G-aenial, GC) with a three-step etch-and-rinse adhesive (Optibond FL, Kerr) was applied as the control.

Three-year clinical evaluation of high-viscosity glass ionomer restorations in non-carious cervical lesions: a randomised controlled split-mouth clinical trial.

Objective: To compare the 3-year clinical performance of high-viscosity glass ionomer restorations with that of composite restorations in non-carious cervical lesions (NCCLs).

Materials And Methods: One hundred thirty-four NCCLs were randomised into two groups according to a split-mouth design. In the experimental group (Hv-GIC), lesions were restored with a high-viscosity glass ionomer (EQUIA Fil, GC), whereas a composite resin (G-aenial, GC) was applied in the control group (E&Ra/comp).

Effect of tooth discolouration severity on the efficacy and colour stability of two different trayless at-home bleaching systems.

The use of trayless at-home bleaching agents in darker teeth is raising some concerns due to their unknown efficacy. The purpose of this in vitro study was to evaluate the effect of tooth discolouration severity on the efficacy and colour stability of two different trayless at-home bleaching systems. Ninety enamel-dentin samples were divided into two groups: lighter tand darker teeth.

Evaluation of the Efficacy and Color Stability of Two Different At-Home Bleaching Systems on Teeth of Different Shades: A Randomized Controlled Clinical Trial.

Objective: This randomized controlled clinical trial compared the bleaching efficacy of two different at-home bleaching systems on teeth of different shades and their color stability after a 6-month follow-up.

Materials And Methods: Ninety-two patients (777 teeth) were randomly divided into three groups: (a) negative control, (b) patients treated with a custom-made tray containing 10% carbamide peroxide (10% CP/PF) (Opalescence PF), and (c) patients treated with a pre-loaded tray containing 6% hydrogen peroxide (6% HP/Go) (Opalescence Go). Teeth in all groups were divided into three sub-groups according to the VITA Classic Shade Guide: light (A1-C1), medium dark (C2-B3), and dark (A3.

Effects of Remineralization Agents on Artificial Carious Lesions.

Purpose: The purpose of this study was to evaluate the remineralization potentials of different agents on demineralized enamel surfaces.

Methods: Four hundred and sixty extracted human molars with artificial carious lesions were divided into six groups: (1) control; (2) acidulated phosphate fluoride (APF); (3) Curodont Repair (CR); (4) silver diamine fluoride (SDF); (5) ammonium hexafluorosilicate (SiF); and (6) SiF plus cetylpiridinium chloride (SiF+CPC). They were subdivided according to immersion periods (seven out of 30 days).

Antimicrobial activity of different disinfectants against cariogenic microorganisms.

The aim of this study was to assess the in vitro antimicrobial effects of chlorhexidine digluconate (CHX), polyhexamethylene biguanide (PHBM), and octenidine dihydrochloride (OCT) on cariogenic microorganisms by using their minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC). CHX, PHBM, and OCT were diluted in distilled water to the final test concentrations. Using the in-tube dilution method, Streptococcus mutans, Lactobacillus acidophilus, Lactobacillus rhamnosus, and Actinomyces viscosus were cultivated on blood agar and Mueller-Hinton broth (MHB) at 37°C for 48 h.

Six-month Clinical Evaluation of a Self-adhesive Flowable Composite in Noncarious Cervical Lesions.

Purpose: The aim of this randomized, controlled, single-center, split-mouth clinical trial was to evaluate the clinical performance of a self-adhesive flowable composite resin (SAFC) in noncarious cervical lesions in comparison with a nanohybrid composite applied with a three-step etch-and-rinse adhesive system (E&Ra/nanoC).

Materials And Methods: Eighty noncarious cervical lesions were included and assigned to one of two groups according to the split-mouth design. The cervical lesions in the experimental group were restored with an SAFC (Fusio Liquid Dentin), while a nanohybrid composite (G-aenial) applied with a three-step etch-and-rinse adhesive system (Optibond FL) was used for the control group.

A minimally invasive technique for the management of severely fluorosed teeth: A two-year follow-up.

Objective: Severely fluorosed and heavily discolored teeth that have large enamel defects give rise to esthetic concerns and require permanent treatment. In such cases, restorative techniques such as porcelain or composite laminate veneers or crowns are generally preferred, in which tooth preparation is inevitably required.

Materials And Methods: This clinical report describes a patient with severely fluorosed teeth who was successfully treated with a minimally invasive technique including enamel microabrasion (6.

clinical evaluation of enamel microabrasion for the aesthetic management of mild-to-severe dental fluorosis.

Statement Of The Problem: The clinical performance of enamel microabrasion alone for aesthetic management of dental fluorosis is debatable.

Purpose Of The Study: This study aimed to compare the clinical efficacy of enamel microabrasion for the aesthetic management of mild-to-severe dental fluorosis.

Methods/materials: A total of 154 fluorosed incisors and canines in 14 patients on the basis of the fluorosis were included; the teeth were classified as mild (group I, n = 53), moderate (group II, n = 56), and severe (group III, n = 45).

Efficiency of caries risk assessment in young adults using Cariogram.

Objective: THE AIMS OF THIS STUDY WERE TO: (1) evaluate the caries risk in young adults using Cariogram and (2) compare the efficiency of Cariogram with the regression risk models created using the same variables in Cariogram by examining the actual caries progression over a 2-year period.

Methods: This study included 100 subjects that were either twenty or twenty-one years-old. Data on general health, diet, oral hygiene and use of fluoride were obtained.

Color changes of dental resin composites before and after polymerization and storage in water.

Unlabelled: The aims of this study were to: (1) evaluate the A2 shades of various types and brands of resin composites to determine if any color differences occurred before and after polymerization and after 1 month of storage in water and (2) examine the correlation among the color changes and changes in Commission internationale de l'éclairage L*, a*, and b* values after polymerization and after 1 month of storage in water. One submicron-hybrid (Spectrum TPH3, DENTSPLY DeTrey, Milford, DE, USA), one nano-filled (Filtek Supreme XT, 3 M ESPE, St. Paul, MN, USA), three micro-hybrid (Filtek Z250, 3 M ESPE; Esthet X, DENTSPLY DeTrey; and Gradia Direct, GC, Tokyo, Japan), and five nano-hybrid (Ceram X, DENTSPLY DeTrey; Clearfil Majesty Esthetics, Kuraray, Osaka, Japan; Premise, Kerr Corporation, Orange, CA, USA; Tetric Evo Ceram, Ivoclar Vivadent, Schaan, Liechtenstein and Tetric N Ceram, Ivoclar Vivadent) light-curing resin composites were tested.

Influence of two desensitizer agents on the microleakage of adhesively luted ceramic inlays.

Objectives: The purpose of this study was to evaluate the effects of two different desensitizers (Hemaseal & Cide and Aqua Prep F) on the microleakage of ceramic inlay restorations luted with adhesive resin cement.

Methods: Cylindrical Class V cavities were prepared on the buccal surfaces of thirty extracted human third molars. One of the desensitizers (either Hemaseal&Cide, Advantage Dental Products Inc.

Tensile bond strength of an aged resin composite repaired with different protocols.

Purpose: To evaluate the effect of different surface treatments and bonding procedures on the tensile bond strength (TBS) of resin composites repaired 6 months after polymerization.

Materials And Methods: Resin composite sticks were aged in distilled water at 37°C for 6 months. They were divided into 12 groups (n = 10) according to the combination of surface treatment/bonding procedures [none, only bur treatment, XP Bond (XPB/Dentsply/DeTrey) with/without bur, AdheSE (A-SE/Ivoclar/Vivadent) with/without bur, Composite Primer (CP/GC) with/without bur, CP after bur and acid-etching, XPB after acid etching and CP with bur, A-SE after bur and CP].

One-year clinical evaluation of the efficacy of a new daytime at-home bleaching technique.

The aim of this study was to compare the clinical efficacy and side effects of a new daytime at-home bleaching technique (28% carbamide peroxide [CP] gel) with the overnight application of 10% CP and to determine the change of tooth color 1-year post-treatment. Twenty healthy volunteers were assigned to one of two sample groups of 10. All participants employed one of the two at-home bleaching systems: (1) the new daytime at-home bleaching system including 28% CP gel with a non-custom-fit tray (Meta Tray, Remedent, Deurle, Belgium) for 20 minutes, and (b) the conventional overnight at-home bleaching system with a 10% CP gel and a custom-fit tray (Opalescence PF, Ultradent, South Jordan, UT, USA) for 6 to 8 hours.

Clinical evaluation of a two-step etch&rinse and a two-step self-etch adhesive system in Class II restorations: two-year results.

Objective: This study evaluated the clinical performance of a two-step etch&rinse and a two-step self-etch adhesive system in Class II restorations after two years of clinical service.

Methods: Thirty-three patients with primary caries or insufficient restorations were enrolled in the study. A total of 87 Class II cavities were restored, 44 using a two-step etch&rinse adhesive system (Single Bond, 3M ESPE) and 43 cavities using a two-step self-etch adhesive (Clearfil SE Bond, Kuraray).

Can the hydrogel form of sodium ascorbate be used to reverse compromised bond strength after bleaching?

Purpose: To assess the effect of the hydrogel form of different concentrations (2.5%, 5%, and 10%) of sodium ascorbate on the shear bond strength of composite after bleaching of the enamel with 10% carbamide peroxide gel.

Materials And Methods: Sixty flat buccal enamel surfaces obtained from 30 bovine incisors were divided into 6 treatment groups: group I, control (nonbleached); group II, no antioxidant treatment after bleaching; group III, 10% sodium ascorbate solution after bleaching; group IV, 2.

Noncarious class V lesions restored with a polyacid modified resin composite and a nanocomposite: a two-year clinical trial.

Purpose: The purpose of this study was to compare the clinical performance of a polyacid modified resin composite and a nanocomposite applied with an antibacterial adhesive system over a period of 2 years in noncarious Class V lesions.

Materials And Methods: Twenty-four patients with at least two noncarious cervical lesions were enrolled in the study. The teeth were restored with a polyacid modified resin composite (Dyract eXtra, Dentsply DeTrey) or a nanocomposite (Filtek Supreme, 3M/ESPE).

Effect of different laser devices on the composition and microhardness of dentin.

This study determined the compositional changes and microhardness of the cavity floor prepared by Er,Cr:YSGG and Er:YAG lasers and compared the results with the conventional method of bur preparation. Fifteen non-carious human molars were used in this study. On the buccal and lingual surfaces of each tooth, two cavities (mesio-distal 3 mm, inciso-gingival 3 mm, depth 2 mm) were prepared with two different laser devices (Er,Cr:YSGG laser; Waterlase MD and Er:YAG laser; KaVo Key Laser 3) and a high-speed turbine.

Can different chlorhexidine agents be used as cavity disinfectants?

This study used the agar well method to compare the antimicrobial effect of cavity disinfectants containing chlorhexidine with other chlorhexidine agents (such as mouthrinses and antiseptics) and to determine whether there was a difference in composite bond strength when these chlorhexidine agents were applied to the dentin surface. All tested solutions showed antimicrobial effect against Streptococcus mutans, Lactobacillus acidophilus, and Candida albicans (p < 0.05).

Microleakage study of different adhesive systems in Class V cavities prepared by Er,Cr:YSGG laser and bur preparation.

This study sought to compare the microleakage of composite resin restorations using two different dentin adhesive systems and two different modes of cavity preparation: a high-speed handpiece and an Er,Cr:YSGG laser. Twenty-five caries-free permanent human premolars were assigned randomly into five groups of five. A high-speed handpiece was used to prepare Class V cavities on the buccal and lingual surfaces of 10 randomly selected teeth.

Shear bond strength of different adhesives to Er:YAG laser-prepared dentin.

Purpose: The aim of this study was to examine the influence of Er:YAG laser on the shear bond strength of three different adhesives to lased dentin.

Materials And Methods: Seventy specimens obtained from 35 extracted human molars were embedded in polyester resin and ground with silicon carbide papers. The samples were divided into seven groups.

Bacterial microleakage of barrier materials in obturated root canals.

The bacterial microleakage of four current restorative materials (glass ionomer cement, polycarboxylate cement, resin modified glass ionomer cement, and flowable composite resin) used as a base over obturated root canals were evaluated during a 5-month period. Sixty single-rooted mandibular premolars were obturated with cold lateral compaction of gutta-percha. The teeth were randomly divided into five groups of 10 teeth each and positive and negative control groups of five.