Application of Optimization Response Surface for the Adsorption of Methylene Blue Dye onto Zinc-coated Activated Carbon.

The activated carbon was produced in the first phase of this investigation by chemically activating hazelnut shell waste with HPO. Composite materials were obtained by coating the activated carbon with zinc oxide, whose BET surface area was calculated as 1278 m g. ZnO-doped ZnO/AC composite was synthesized as an adsorbent for its possible application in the elimination of organic dyestuff MB, and its removal efficiency was investigated.

Modeling of methylene blue removal on FeO modified activated carbon with artificial neural network (ANN).

In this study, AC/FeO adsorbent was first synthesized by modifying activated carbon with FeO The structure of the adsorbent was then characterized using analysis techniques specific surface area (BET), Scanning Electron Microscopy with Energy Dispersive X-ray Spectroscopy (SEM-EDX), and Fourier Transform Infrared Spectroscopy (FTIR). Equilibrium, thermodynamic and kinetic studies were carried out on the removal of methylene blue (MB) dyestuff from aqueous solutions AC/FeO adsorbent. The Langmuir maximum adsorption capacity of AC/FeO was 312.

Prepared activated carbon from hazelnut shell where coated nanocomposite with Ag used for antibacterial and adsorption properties.

In this research, prepared activated carbon by HPO from hazelnut shells was coated with silver ions for the preparation of nanoparticles which were mixed in two ratios (1:0.5 and 1:1) by using of chemical reduction method. The adsorption capacity of activated carbons has been proven by BET and iodine number.

Methylene blue removal with ZnO coated montmorillonite: thermodynamic, kinetic, isotherm and artificial intelligence studies.

In this study, montmorillonite clay was coated with zinc oxide (ZnO) nanoparticles. The study's primary aim is to investigate the adsorption properties of zinc oxide coated montmorillonite adsorbent against methylene blue (MB), and determine ZnO's effectiveness in adsorption. First, the surface properties of the ZnO-coated montmorillonite (ZnO/MMT) adsorbent were determined by FTIR Spectroscopy, XRD, and SEM/EDS.

Effect of Cu, Fe, Mn, Ni, and Zn and Bioaccessibilities in the Hazelnuts Growing in Sakarya, Turkey using In-Vitro Gastrointestinal Extraction Method.

Total concentrations of heavy metals such as Cu, Fe, Mn, Ni, and Zn in different hazelnut samples obtained by different regions of Sakarya city, Turkey were identified for the determination of heavy metal in the first section of this study. In the second section of our study, metal concentrations that can pass to the body by stomach and intestine in case of consuming hazelnuts as in vitro with gastrointestinal methods. It is performed by using enzymes and hydrochloric acid with model intestine and stomach system.

The Levels of Trace Elements in Honey and Molasses Samples That Were Determined by ICP-OES After Microwave Digestion Method.

The aim of this study is determining the amount of Al, Cu, Fe, Mn, Ni, Pb and Zn in samples of molasses and honey which were gathered from the Sakarya and Istanbul regions. In this study, trace elements in 8 honey and 20 molasses samples with different botanic features were evaluated. The sample preparation phase was performed via wet decomposition method and microwave digestion system.

Influence of process parameters on the surface and chemical properties of activated carbon obtained from biochar by chemical activation.

Activated carbons were produced from biochar obtained through pyrolysis of safflower seed press cake by chemical activation with zinc chloride. The influences of process variables such as the activation temperature and the impregnation ratio on textural and chemical-surface properties of the activated carbons were investigated. Also, the adsorptive properties of activated carbons were tested using methylene blue dye as the targeted adsorbate.