Wavelength tuning of VCSELs via controlled strain.

Besides major advantages for telecommunication applications, vertical-cavity surface-emitting lasers (VCSELs) have attracted interest for their potential for neuro-inspired computing, frequency comb generation, or high-frequency spin oscillations. In the meantime, strain applied to the laser structure has been shown to have a significant impact on the laser emission properties such as the polarization dynamics or birefringence. In this work, we further explore the influence of strain on VCSELs and how this effect could be used to fine-tune the laser wavelength.

Fabrication of multilevel metalenses using multiphoton lithography: from design to evaluation.

We present a procedure for the design of multilevel metalenses and their fabrication with multiphoton-based direct laser writing. This work pushes this fast and versatile fabrication technique to its limits in terms of achievable feature size dimensions for the creation of compact high-numerical aperture metalenses on flat substrates and optical fiber tips. We demonstrate the design of metalenses with various numerical apertures up to 0.

Mass-manufacturable scintillation-based optical fiber dosimeters for brachytherapy.

Scintillation-based fiber dosimeters are a powerful tool for minimally invasive localized real-time monitoring of the dose rate during Low Dose Rate (LDR) and High Dose Rate (HDR) brachytherapy (BT). This paper presents the design, fabrication, and characterization of such dosimeters, consisting of scintillating sensor tips attached to polymer optical fiber (POF). The sensor tips consist of inorganic scintillators, i.

Malnutrition prevalence in cancer patients in Belgium: The ONCOCARE study.

Rationale: Unintentional weight loss and malnutrition are common among cancer patients. Malnutrition has been associated with impaired health-related quality of life, less well-tolerated chemotherapy regimens and shorter life duration. In Belgium there is a lack of epidemiological data on malnutrition in oncology patients at advanced stages of the disease.

Design and demonstration of a six-channel multiresolution imaging system.

Multichannel imaging systems consist of multiple channels that have different imaging characteristics (fields-of-view and angular resolutions). We design and demonstrate a six-channel multiresolution imaging system that can achieve a relative magnification ratio of up to 10 times between the channels and at the same time result in different depths-of-field. The imaging system consists of two double-sided lens arrays made of PMMA material, a baffle to eliminate possible cross talk between neighboring channels, and a Sony full-frame image sensor.

Severe treatment-induced inflammatory polyarthritis in advanced melanoma patients: 2 case reports.

Immune checkpoint inhibitors (ICI) and targeted therapies form the therapeutic mainstay for v-Raf murine sarcoma viral oncogene homolog B V600-mutated metastatic melanoma. Both treatment regimens can cause inflammatory arthritis. The reported incidence of treatment-induced inflammatory arthritis is low, though presumably underestimated due to lack of awareness, clear definitions and uniform grading systems.

On the potential use of two-photon polymerization to 3D print chromatographic packed bed supports.

The continuous quest for chromatographic supports offering kinetic performance properties superior to that of the packed bed of spheres has pushed the field to consider alternative formats such as for example monolithic and pillar array columns. This quest seems bound to culminate in the use of 3D printing technology, as this intrinsically offers the possibility to produce supports with a perfect uniformity and with a size and shape that is fully optimized for the chromatographic separation process. However, to be competitive with the current state-of-the-art, structures with sub-micron feature sizes are required.

Miniature freeform flow-line lightguide for sensing: from design to fabrication.

We present the development of a compact (about 1.3 × 2.0 × 20 mm) freeform optical lightguide for sensing applications, from the conceptual design to the fabrication through injection molding.

Increasing the Microfabrication Performance of Synthetic Hydrogel Precursors through Molecular Design.

Implementation of hydrogel precursors in two-photon polymerization (2PP) technology provides promising opportunities in the tissue engineering field thanks to their soft characteristics and similarity to extracellular matrix. Most of the hydrogels, however, are prone to post-fabrication deformations, leading to a mismatch between the computer-aided design and the printed structure. In the present work, we have developed novel synthetic hydrogel precursors to overcome the limitations associated with 2PP processing of conventional hydrogel precursors such as post-processing deformations and a narrow processing window.

3D direct laser writing of microstructured optical fiber tapers on single-mode fibers for mode-field conversion.

We present a design and fabrication approach for 3D printed polymer microstructured optical fiber tapers on standard single-mode glass fibers for efficient and compact mode-field conversion. This paves the way towards complex functionalized fiber tips for various applications, like sensors and beam shaping components, currently limited by the mode-field size and distribution of standard optical fibers. In this paper, we demonstrate the potential of mode-field converting tapers for relaxing the misalignment tolerance in fiber-to-fiber connections and maximizing the coupling efficiency in fiber-to-chip connections.

Thiol-norbornene gelatin hydrogels: influence of thiolated crosslinker on network properties and high definition 3D printing.

Photocrosslinkable gelatin hydrogels are excellent bioinks or biomaterial ink components to serve biofabrication applications. Especially the widely investigated gelatin-methacroyl (gel-MA) hydrogels hold an impressive track record. However, over the past decade, increasing attention is being paid to thiol-ene photo-click chemistry to obtain hydrogel networks benefitting from a faster reactivity (i.

Measurement of the soliton number in guiding media through continuum generation.

No general approach is available yet to measure directly the ratio between chromatic dispersion and the nonlinear coefficient, and hence the soliton number for a given optical pulse, in an arbitrary guiding medium. Here we solve this problem using continuum generation. We experimentally demonstrate our method in polarization-maintaining and single-mode fibers with positive and negative chromatic dispersion.

Designer Descemet Membranes Containing PDLLA and Functionalized Gelatins as Corneal Endothelial Scaffold.

Corneal blindness is the fourth leading cause of visual impairment. Of specific interest is blindness due to a dysfunctional corneal endothelium which can only be treated by transplanting healthy tissue from a deceased donor. Unfortunately, corneal supply does not meet the demand with only one donor for every 70 patients.

(Photo-)crosslinkable gelatin derivatives for biofabrication applications.

Over the recent decades gelatin has proven to be very suitable as an extracellular matrix mimic for biofabrication and tissue engineering applications. However, gelatin is prone to dissolution at typical cell culture conditions and is therefore often chemically modified to introduce (photo-)crosslinkable functionalities. These modifications allow to tune the material properties of gelatin, making it suitable for a wide range of biofabrication techniques both as a bioink and as a biomaterial ink (component).

Technological advancements for the development of stem cell-based models for hepatotoxicity testing.

Stem cells are characterized by their self-renewal capacity and their ability to differentiate into multiple cell types of the human body. Using directed differentiation strategies, stem cells can now be converted into hepatocyte-like cells (HLCs) and therefore, represent a unique cell source for toxicological applications in vitro. However, the acquired hepatic functionality of stem cell-derived HLCs is still significantly inferior to primary human hepatocytes.

Graphene's nonlinear-optical physics revealed through exponentially growing self-phase modulation.

Graphene is considered a record-performance nonlinear-optical material on the basis of numerous experiments. The observed strong nonlinear response ascribed to the refractive part of graphene's electronic third-order susceptibility χ cannot, however, be explained using the relatively modest χ value theoretically predicted for the 2D material. Here we solve this long-standing paradox and demonstrate that, rather than χ-based refraction, a complex phenomenon which we call saturable photoexcited-carrier refraction is at the heart of nonlinear-optical interactions in graphene such as self-phase modulation.

Highly Reactive Thiol-Norbornene Photo-Click Hydrogels: Toward Improved Processability.

In the present work, gelatin type B is modified with highly reactive norbornene functionalities (Gel-NB) following a one-pot synthesis approach to enable subsequent thiol-ene photo-click crosslinking. The modification strategy displays close control over the amount of introduced functionalities. Additionally, Gel-NB exhibits considerably improved processing capabilities in terms of two-photon polymerization when benchmarked to earlier-reported crosslinkable gelatin derivatives (e.

Cross-Linkable Gelatins with Superior Mechanical Properties Through Carboxylic Acid Modification: Increasing the Two-Photon Polymerization Potential.

The present work reports on the development of photo-cross-linkable gelatins sufficiently versatile to overcome current biopolymer two-photon polymerization (2PP) processing limitations. To this end, both the primary amines as well as the carboxylic acids of gelatin type B were functionalized with photo-cross-linkable moieties (up to 1 mmol/g) resulting in superior and tunable mechanical properties (G' from 5000 to 147000 Pa) enabling efficient 2PP processing. The materials were characterized in depth prior to and after photoinduced cross-linking using fully functionalized gelatin-methacrylamide (gel-MOD) as a benchmark to assess the effect of functionalization on the protein properties, cross-linking efficiency, and mechanical properties.

Which Factors Predict Overall Survival in Patients With Metastatic Castration-Resistant Prostate Cancer Treated With Abiraterone Acetate Post-Docetaxel?

Background: Abiraterone acetate (AA) increases overall survival (OS) in patients with metastatic castration-resistant prostate cancer (mCRPC) previously treated with docetaxel. However, survival time varies substantially between individuals. Our goal was to identify prognostic factors that better estimate OS.

Indirect Rapid Prototyping: Opening Up Unprecedented Opportunities in Scaffold Design and Applications.

Over the past decades, solid freeform fabrication (SFF) has emerged as the main technology for the production of scaffolds for tissue engineering applications as a result of the architectural versatility. However, certain limitations have also arisen, primarily associated with the available, rather limited range of materials suitable for processing. To overcome these limitations, several research groups have been exploring novel methodologies through which a construct, generated via SFF, is applied as a sacrificial mould for production of the final construct.

Abiraterone acetate post-docetaxel for metastatic castration-resistant prostate cancer in the Belgian compassionate use program.

Background: Abiraterone acetate (AA) is licensed for treating metastatic castration-resistant prostate cancer (mCRPC). Real-world data on oncological outcome after AA are scarce. The current study assesses efficacy and safety of AA in mCRPC patients previously treated with docetaxel who started treatment during the Belgian compassionate use program (January 2011-July 2012).

Mass-manufacturable polymer microfluidic device for dual fiber optical trapping.

We present a microfluidic chip in Polymethyl methacrylate (PMMA) for optical trapping of particles in an 80µm wide microchannel using two counterpropagating single-mode beams. The trapping fibers are separated from the sample fluid by 70µm thick polymer walls. We calculate the optical forces that act on particles flowing in the microchannel using wave optics in combination with non-sequential ray-tracing and further mathematical processing.

Laser ablation- and plasma etching-based patterning of graphene on silicon-on-insulator waveguides.

We present a new approach to remove monolayer graphene transferred on top of a silicon-on-insulator (SOI) photonic integrated chip. Femtosecond laser ablation is used for the first time to remove graphene from SOI waveguides, whereas oxygen plasma etching through a metal mask is employed to peel off graphene from the grating couplers attached to the waveguides. We show by means of Raman spectroscopy and atomic force microscopy that the removal of graphene is successful with minimal damage to the underlying SOI waveguides.

Indirect additive manufacturing as an elegant tool for the production of self-supporting low density gelatin scaffolds.

The present work describes for the first time the production of self-supporting low gelatin density (<10 w/v%) porous scaffolds using methacrylamide-modified gelatin as an extracellular matrix mimicking component. As porous scaffolds starting from low gelatin concentrations cannot be realized with the conventional additive manufacturing techniques in the abscence of additives, we applied an indirect fused deposition modelling approach. To realize this, we have printed a sacrificial polyester scaffold which supported the hydrogel material during UV crosslinking, thereby preventing hydrogel structure collapse.