A Potentially Versatile Enzyme Sensor Platform: Enzyme-Loaded, Tagged, Porous Polymeric Nanocapsules.

Enzymes are essential to life and indispensable in a wide range of industries (food, pharmaceutical, medical, biosensing, etc.); however, a significant shortcoming of these fragile biological catalysts is their poor stability. To address this challenge, a variety of immobilization methods have been described to enhance the enzyme's stability.

Electrochemical sensor for tricyclic antidepressants with low nanomolar detection limit: Quantitative Determination of Amitriptyline and Nortriptyline in blood.

Amitriptyline and its metabolite, Nortriptyline are commonly used tricyclic antidepressant (TCA) drugs that are electrochemically active. In this work, the performance characteristics of a plasticized PVC membrane-coated glassy carbon (GC) electrode are described for the voltammetric quantification of Amitriptyline and Nortriptyline in whole blood. The highly lipophilic Amitriptyline and Nortriptyline preferentially partition into the plasticized PVC membrane where the free drug is oxidized on the GC electrode.

Polymeric membrane-modified voltammetric sensors for lipophilic analytes with nanomolar detection limit: Key parameters influencing the response characteristics.

Thin plasticized PVC membrane-coated glassy carbon working electrodes have been used for the voltammetric measurement of highly lipophilic, electroactive drugs. Compared to conventional working electrodes, these membrane-coated electrodes exhibit remarkable detection limit and selectivity and are less prone to electrode fouling. The unique performance characteristics of these sensors are related to the large partition coefficient of the analyte in the membrane coating where it is oxidized in a non-aqueous membrane phase.

A "Smart" Biosensor-Enabled Intravascular Catheter and Platform for Dynamic Delivery of Propofol to "Close the Loop" for Total Intravenous Anesthesia.

Background: Target-controlled infusion anesthesia is used worldwide to provide user-defined, stable, blood concentrations of propofol for sedation and anesthesia. The drug infusion is controlled by a microprocessor that uses population-based pharmacokinetic data and patient biometrics to estimate the required infusion rate to replace losses from the blood compartment due to drug distribution and metabolism. The objective of the research was to develop and validate a method to detect and quantify propofol levels in the blood, to improve the safety of propofol use, and to demonstrate a pathway for regulatory approval for its use in the USA.

Multilayer and Surface Immobilization of EDOT-Decorated Nanocapsules.

To assess the feasibility of utilizing reagent-loaded, porous polymeric nanocapsules (NCs) for chemical and biochemical sensor design, the surfaces of the NCs were decorated with 3,4-ethylenedioxythiophene (EDOT) moieties. The pores in the capsule wall allow unhindered bidirectional diffusion of molecules smaller than the programmed pore sizes, while larger molecules are either entrapped inside or blocked from entering the interior of the nanocapsules. Here, we investigate two electrochemical deposition methods to covalently attach acrylate-based porous nanocapsules with 3,4-ethylenedioxythiophene moieties on the nanocapsule surface, i.

Plasticized PVC Membrane Modified Electrodes: Voltammetry of Highly Hydrophobic Compounds.

In the last 50 years, plasticized polyvinyl chloride (PVC) membranes have gained unique importance in chemical sensor development. Originally, these membranes separated two solutions in conventional ion-selective electrodes. Later, the same membranes were applied over a variety of supporting electrodes and used in both potentiometric and voltammetric measurements of ions and electrically charged molecules.

Kinetic Description of the Membrane-Solution Interface for Ion-Selective Electrodes.

The theoretical models for ISEs almost exclusively assume thermodynamic equilibrium at the membrane/solution-phase boundary. In this report, we present a new, congruent model which combines first-order reaction kinetics of ion-exchange at the phase boundary and diffusional mass transport in the adjoining phases in the continuity equation. The influence of the rate constant in the new kinetic model has significant impact on the predicted transients corresponding to instantaneous change in the sample solution composition.

Reference Electrodes with Ionic Liquid Salt Bridge: When Will These Innovative Novel Reference Electrodes Gain Broad Acceptance?

In this paper, we raise questions that researchers have to ask if they intend to replace a conventional reference electrode with an ionic liquid-based reference electrode and try to answer these questions based on our experiences and literature data. Among these questions, the most important is which ionic liquid should be used. However, beyond the chemical composition of the ionic liquid, to realize all the potential benefits of ionic-liquid based reference electrodes, there are additional, equally important considerations.

Generation, clearance, toxicity, and monitoring possibilities of unaccounted uremic toxins for improved dialysis prescriptions.

Current dialysis-dosing calculations provide an incomplete assessment of blood purification. They exclude clearances of protein-bound uremic toxins (PB-UTs), such as polyamines, p-cresol sulfate, and indoxyl sulfate, relying solely on the clearance of urea as a surrogate for all molecules accumulating in patients with end-stage renal disease (ESRD). PB-UTs clear differently in dialysis but also during normal renal function.

Medical Sensors for the Diagnosis and Management of Disease: The Physician Perspective.

The objective of this paper is to assist developers of medical sensors to better formulate the clinically relevant design criteria and required performance characteristics of their novel sensor based on an understanding of how these devices will be used by physicians. Sensor technologies play a central role in medicine, and the most critical aspect of the sensor's clinical utility relates to these design decisions. Clinically, sensors are used by health care providers to make both diagnostic and management decisions, and the sensors that aid in these decisions are evaluated by certain clinical, as well as analytical, criteria.

Solid-Contact pH Sensor without CO Interference with a Superhydrophobic PEDOT-C as Solid Contact: The Ultimate "Water Layer" Test.

The aim of this study was to find a conducting polymer-based solid contact (SC) for ion-selective electrodes (ISEs) that could become the ultimate, generally applicable SC, which in combination with all kinds of ion-selective membranes (ISMs) would match the performance characteristics of conventional ISEs. We present data collected with electrodes utilizing PEDOT-C, a highly hydrophobic derivative of poly(3,4-ethylenedioxythiophene), PEDOT, as SC and compare its performance characteristics with PEDOT-based SC ISEs. PEDOT-C has not been used in SC ISEs previously.

Voltammetric determination of diffusion coefficients in polymer membranes.

The diffusion-controlled transport of ions and molecules through polymer membranes utilized in chemical and biosensors is often the key factor determining the response characteristics of these sensors. In this paper, a simple voltammetric method is described for the determination of diffusion coefficients of redox molecules in resistive polymer membranes using a planar electrochemical cell (PEC) with a 5 μm radius carbon fiber as working electrode. In the proposed method, the diffusion coefficients are assessed from the scan rate dependence of the peak (or limiting) currents in linear sweep or cyclic voltammograms.

PEDOT(PSS) as Solid Contact for Ion-Selective Electrodes: The Influence of the PEDOT(PSS) Film Thickness on the Equilibration Times.

To understand the rate determining processes during the equilibration of poly(3,4-ethylenedioxythiophene):polystyrenesulfonate-based (PEDOT(PSS)-based) solid contact (SC) ion-selective electrodes (ISEs), the surfaces of Pt, Au, and GC electrodes were coated with 0.1, 1.0, 2.

A Feedback Control Approach to Organic Drug Infusions Using Electrochemical Measurement.

Goal: Target-controlled infusion of anesthesia is a closed-loop automated drug delivery method with a computer-aided control. Our goal is to design and test an automated drug infusion platform for propofol delivery in total intravenous anesthesia (TIVA) administration.

Methods: In the proposed method, a dilution chamber with first-order exponential decay characteristics was used to model the pharmacodynamics decay of a drug.

Equilibration Time of Solid Contact Ion-Selective Electrodes.

Papers published on ion-selective electrodes (ISEs) generally report on the performance characteristics of these devices after long, extensive conditioning. Conditioning refers to the equilibration of the ion-selective electrode in an aqueous solution before the measurement of the sample. The requirement for long and repeated conditioning is a significant burden in a variety of applications, for example, single-use sensors aimed for in vivo or field applications and solid contact (SC) ISEs, which were developed to provide simple, mass-produced sensors that have the potential to be implemented without calibration and extensive conditioning.

Propofol detection and quantification in human blood: the promise of feedback controlled, closed-loop anesthesia.

The performance of a membrane-coated voltammetric sensor for propofol (2,6-diisopropylphenol) has been characterized in long term monitoring experiments using an automated flow analytical system (AFAS) and by analyzing human serum and whole blood samples by standard addition. It is shown that the signal of the membrane-coated electrochemical sensor for propofol is not influenced by the components of the pharmaceutical formulation of propofol (propofol injectable emulsion). The current values recorded with the electrochemical propofol sensor in buffer solutions and human serum samples spiked with propofol injectable emulsion showed excellent correlation with the peak heights recorded with an UV-Vis detector during the HPLC analysis of these samples (R(2) = 0.

Facile directed assembly of hollow polymer nanocapsules within spontaneously formed catanionic surfactant vesicles.

Surfactant vesicles containing monomers in the interior of the bilayer were used to template hollow polymer nanocapsules. This study investigated the formation of surfactant/monomer assemblies by two loading methods, concurrent loading and diffusion loading. The assembly process and the resulting aggregates were investigated with dynamic light scattering, small angle neutron scattering, and small-angle X-ray scattering.

A tutorial on the application of ion-selective electrode potentiometry: an analytical method with unique qualities, unexplored opportunities and potential pitfalls; tutorial.

Ion-selective potentiometry enjoys practical utility as a simple analytical technique to measure ionic constituents in complex samples. Advances in the field have improved the selectivity and decreased the detection limit of ion-selective electrodes (ISEs) by orders of magnitude such that trace analysis in micro and nanomolar concentrations is now possible with potentiometric sensors. This tutorial reviews the fundamental principles of ion-selective potentiometry, describes the practical considerations involved in the use of these sensors to measure real samples, and discusses the statistical evaluation of experimental results compared with alternative analytical techniques.

Preliminary investigation of crosslinked chitosan sponges for tailorable drug delivery and infection control.

Local versus systemic antibiotic delivery may be an effective strategy for treating musculoskeletal infections, especially when antibiotic-resistant bacteria are present. Lyophilized uncrosslinked, genipin crosslinked, and genipin crosslinked with poly(N-isopropylacrylamide) (PNIPAM) chitosan sponges were analyzed for their in vitro degradation rate, chemical crosslinking, antibiotic uptake, elution, biologic activity, and cytotoxicity. These evaluations were pursued to determine if crosslinking with genipin could be used to create a tailorable point of care loaded sponge for local infection control.

Toward feedback-controlled anesthesia: voltammetric measurement of propofol (2,6-diisopropylphenol) in serum-like electrolyte solutions.

Propofol is a widely used, potent intravenous anesthetic for ambulatory anesthesia and long-term sedation. The target steady state concentration of propofol in blood is 0.25-10 μg/mL (1-60 μM).

Dye-loaded porous nanocapsules immobilized in a permeable polyvinyl alcohol matrix: a versatile optical sensor platform.

In this work we report on a versatile sensor platform based on encapsulated indicator dyes. Dyes are entrapped in hollow nanocapsules with nanometer-thin walls of controlled porosity. The porous nanocapsules retain molecules larger than the pore size but provide ultrafast access to their interior for molecules and ions smaller than the pore size.

Electrochemical quantification of 2,6-diisopropylphenol (propofol).

2,6-Diisopropylphenol (propofol) is a potent anesthetic drug with fast onset of the anesthetic effect and short recovery time for the patients. Outside of the United States, propofol is widely used in performing target controlled infusion anesthesia. With the long term vision of an electrochemical sensor for in vivo monitoring and feedback controlled dosing of propofol in blood, different alternatives for the electrochemical quantification of propofol using diverse working electrodes and experimental conditions are presented in this contribution.

Self-Limiting Robust Surface-Grafted Organic Nanofilms.

Robust surface-bound insulating polymer films with controlled thickness in <5 nm range are important for technological advances in diverse disciplines such as electrochemical sensors, molecular electronics, separations and anti-corrosive coatings. Creating these films by simple methods from readily available materials has been a significant challenge. Here we report a newly synthesized molecule combining a styrene and thiol moieties, joined via a short linker, that binds to the gold surface, polymerizes and crosslinks polymer chains to form robust films with uniform and controlled thickness and complete surface coverage.

Surface plasmon resonance aided electrochemical immunosensor for CK-MB determination in undiluted serum samples.

This article presents a simple chronoamperometric immunosensor for the quantitative assessment of creatine kinase MB (CK-MB) in 50 microL undiluted serum samples. The immunosensor consists of gold working and counter electrodes patterned onto a glass chip by thin-film photolithography and an external Ag|AgCl reference electrode. The detection limit (DL) of the chronoamperometric method is 13 ng mL(-1) (DL = 2xRMSD/S, where RMSD is the residual mean standard deviation of the measured points around a calibration curve with a slope of S).