Prosthetic complications and failures of implant-supported fixed partial dentures: A scoping review.

Statement Of Problem: Although high survival rates of implant-supported fixed partial dentures (ISFPDs) have been reported, evidence for complications, failures, and factors that interfere with their longevity is lacking.

Purpose: The purpose of this scoping review was to review the literature to investigate the most common failures and complications of ISFPDs.

Material And Methods: This review followed the preferred reporting items for systematic reviews and meta-analyses scoping review (PRISMA ScR) guidelines, and the methodology was registered on the open science framework (osf.

Short-Term Effect of Scalp Acupuncture on Pain, Sleep Disorders, and Quality of Life in Patients with Temporomandibular Disorders: A A Randomized Clinical Trial.

Objetive: To evaluate the effects of Chinese scalp acupuncture in patients diagnosed with temporomandibular disorders (TMD) on pain, sleep, and quality of life (QOL), and compare these results with the results from traditional therapies.

Methods: Sixty patients diagnosed with TMD using the research diagnostic criteria for temporomandibular disorders (RDC/TMD) were allocated into four treatment groups: counseling (C = 15), occlusal splint (OS = 15), scalp acupuncture (SA = 15), and manual therapy (MT = 15). Participants were re-evaluated within 1 month.

Temporomandibular disorders and the use of traditional and laser acupuncture: a systematic review.

Objective: To evaluate current studies to establish and compare the efficacy of traditional and laser acupuncture in reducing the signs and symptoms of temporomandibular disorders (TMD).

Methods: PubMed, Cochrane, Scopus, and Web of Science databases were searched. Clinical, controlled, and randomized trials written in English and having used traditional or laser acupuncture as therapy for TMD and RDC/TMD or DC/TMD as a diagnostic criterion for TMD were included.

Manual Therapy in the Treatment of Myofascial Pain Related to Temporomandibular Disorders: A Systematic Review.

Aims: To evaluate the effectiveness of manual therapy in the treatment of myofascial pain related to temporomandibular disorders.

Methods: Randomized clinical trials were searched in the Cochrane Library, MEDLINE, Web of Science, Scopus, LILACS, and SciELO databases using the following keywords: temporomandibular joint disorders; craniomandibular disorders; myofascial pain syndromes; myofascial pain; exercise therapy; myofunctional therapy; physical therapy modalities; clinical trial; prospective studies; and longitudinal studies. Studies using the RDC/TMD and manual therapy for myofascial pain were included.

Conservative therapies to treat pain and anxiety associated with temporomandibular disorders: a randomized clinical trial.

Introduction: Temporomandibular dysfunction (TMD) is a condition that affects the stomatognathic system.

Objective: To determine the effect of treatment with an occlusal splint (OS), manual therapy (MT), counselling (CS) and the combination of an occlusal splint and counselling (OSCS) on pain and anxiety in patients with TMD.

Materials And Methods: A randomised clinical trial was conducted with 89 patients diagnosed with TMD through RDC/TMD (Research Diagnostic Criteria for Temporomandibular Disorders) and divided into four groups of treatment: OSCS (n = 25); OS (n = 24); MT (n = 21); and CS (n = 19).

Short-term effectiveness of conservative therapies in pain, quality of life, and sleep in patients with temporomandibular disorders: A randomized clinical trial.

: To evaluate, in the short term, the effectiveness of conservative therapies in pain, quality of life, and sleep in TMD patients.: Eighty-nine TMD patients diagnosed by RDC-TMD were distributed in occlusal splints (OS; n= 24), manual therapy (MT; n= 21), counseling (C; n= 19), and OS associated with C (OSC; n= 25) therapy groups. Data collection was performed at baseline and within one month by VAS (pain), PSQI (sleep quality -SQ), WHOQOL-BREF (Quality of life - QL) and OHIP-14 (quality of life related to oral health -QLOH).

Influence of resin cement thickness and temperature variation on mechanical behavior of dental ceramic fragment restoration.

To evaluate the stress behavior of ceramic fragment restoration, varying the thickness of the cement layer and intraoral temperature variation. A solid model of a upper lateral incisor was obtained and a defect at enamel distal/incisal edge was restored with a ceramic fragment. Based on this initial model, 4 different models (M) were built: M1 - absence of cement layer (CL) (0 μm of thickness); M2 - CL with an uniform thickness of 50 μm; M3 - CL with 50 μm at the margin of ceramics and 100 μm in the inner area far from margins; M4 - CL with 50 μm at the margin of ceramics and 200 μm in the inner area far from margins.

Acupuncture in Temporomandibular Disorder Myofascial Pain Treatment: A Systematic Review.

Aims: To carry out a systematic review of clinical trials published up to 2015 to determine the effectiveness of acupuncture in treating myofascial pain in temporomandibular disorder (TMD) patients.

Methods: The databases used were the Cochrane Library, PubMed, Scopus, and Web of Science; the dates of the articles surveyed ranged from 1990 to May 2015. The inclusion criteria were: (1) publications in English, Portuguese, or Spanish; (2) controlled clinical trials; (3) patients with TMD of muscular origin; and (4) studies that used acupuncture or laser acupuncture only for treatment.

Zirconia-based dental crown to support a removable partial denture: a three-dimensional finite element analysis using contact elements and micro-CT data.

Veneer fracture is the most common complication in zirconia-based restorations. The aim of this study was to evaluate the mechanical behavior of a zirconia-based crown in a lower canine tooth supporting removable partial denture (RPD) prosthesis, varying the bond quality of the veneer/coping interface. Microtomography (μCT) data of an extracted left lower canine were used to build the finite element model (M) varying the core material (gold core - MAu; zirconia core - MZi) and the quality of the veneer/core interface (complete bonded - MZi; incomplete bonded - MZi-NL).

Influence of platform and abutment angulation on peri-implant bone. A three-dimensional finite element stress analysis.

The aim of this study was to evaluate stress distribution on the peri-implant bone, simulating the influence of Nobel Select implants with straight or angulated abutments on regular and switching platform in the anterior maxilla, by means of 3-dimensional finite element analysis. Four mathematical models of a central incisor supported by external hexagon implant (13 mm × 5 mm) were created varying the platform (R, regular or S, switching) and the abutments (S, straight or A, angulated 15°). The models were created by using Mimics 13 and Solid Works 2010 software programs.

Influence of microthreads and platform switching on stress distribution in bone using angled abutments.

Purpose: To evaluate the stress distribution in peri-implant bone by simulating the effect of an implant with microthreads and platform switching on angled abutments through tridimensional finite element analysis. The postulated hypothesis was that the presence of microthreads and platform switching would reduce the stress concentration in the cortical bone.

Methods: Four mathematical models of a central incisor supported by an implant (5.

Short implant to support maxillary restorations: bone stress analysis using regular and switching platform.

Purpose: The aim of this study was to evaluate stress distribution on peri-implant bone simulating the influence of implants with different lengths on regular and switching platforms in the anterior maxilla by means of three-dimensional finite element analysis.

Materials And Methods: Four mathematical models of a central incisor supported by an external hexagon implant (diameter, 5.0 mm) were created, varying the length (15.

Straight and angulated abutments in platform switching: influence of loading on bone stress by three-dimensional finite element analysis.

Purpose: In view of reports in the literature on the benefits achieved with the use of platform switching, described as the use of an implant with a larger diameter than the abutment diameter, the goal being to prevent the (previously) normal bone loss down to the first thread that occurs around most implants, thus enhancing soft tissue aesthetics and stability and the need for implant inclination due to bone anatomy in some cases, the aim of this study was to evaluate bone stress distribution on peri-implant bone, by using three-dimensional finite element analysis to simulate the influence of implants with different abutment angulations (0 and 15 degrees) in platform switching.

Methods: Four mathematical models of an implant-supported central incisor were created with varying abutment angulations: straight abutment (S1 and S2) and angulated abutment at 15 degrees (A1 and A2), submitted to 2 loading conditions (100 N): S1 and A1-oblique loading (45 degrees) and S2 and A2-axial loading, parallel to the long axis of the implant. Maximum (σmax) and minimum (σmin) principal stress values were obtained for cortical and trabecular bone.

Regular and platform switching: bone stress analysis varying implant type.

Purpose: This study aimed to evaluate stress distribution on peri-implant bone simulating the influence of platform switching in external and internal hexagon implants using three-dimensional finite element analysis.

Materials And Methods: Four mathematical models of a central incisor supported by an implant were created: External Regular model (ER) with 5.0 mm × 11.

Effect of metal-ceramic or all-ceramic superstructure materials on stress distribution in a single implant-supported prosthesis: three-dimensional finite element analysis.

Purpose: This three-dimensional finite element analysis study evaluated the effect of different material combinations on stress distribution within metal-ceramic and all-ceramic single implant-supported prostheses.

Materials And Methods: Three-dimensional finite element models reproducing a segment of the maxilla with a missing left first premolar were created. Five groups were established to represent different superstructure materials: GP, porcelain fused to gold alloy; GR, modified composite resin fused to gold alloy; TP, porcelain fused to titanium; TR, modified composite resin fused to titanium; and ZP, porcelain fused to zirconia.

Bonding all-ceramic restorations with two resins cement techniques: a clinical report of three-year follow-up.

Ceramics have been widely used for esthetic and functional improvements. The resin cement is the material of choice for bonding ceramics to dental substrate and it can also dictate the final esthetic appearance and strength of the restoration. The correct use of the wide spectrum of resin luting agents available depends on the dental tooth substrate.

Recovering the function and esthetics of fractured teeth using several restorative cosmetic approaches. Three clinical cases.

The teeth most commonly affected by trauma are the maxillary central incisors. The most frequent types of traumatic dental injuries to permanent teeth are enamel fractures, enamel and dentine fractures, and enamel and dentine fractures with pulp involvement. This article describes three clinical cases with different levels of traumatized maxillary incisors and several cosmetic approaches for recovery of the esthetics and the masticatory function, as well as the social/psychological aspects of treatment.

Influence of high insertion torque on implant placement: an anisotropic bone stress analysis.

The aim of this study was to evaluate the influence of the high values of insertion torques on the stress and strain distribution in cortical and cancellous bones. Based on tomography imaging, a representative mathematical model of a partial maxilla was built using Mimics 11.11 and Solid Works 2010 softwares.

Regular and switching platform: bone stress analysis with varying implant diameter.

The aim of this study was to evaluate stress distribution of the peri-implant bone by simulating the biomechanical influence of implants with different diameters of regular or platform switched connections by means of 3-dimensional finite element analysis. Five mathematical models of an implant-supported central incisor were created by varying the diameter (5.5 and 4.

The use of transitional implants to support provisional prostheses during the healing phase: a literature review.

Objective: transitional implants are indicated for cases in which immediate loading is counterindicated because a healing period is necessary for osseointegration of the definitive implants. These provisional implants were developed to support an implant-supported fixed prosthesis or overdenture to provide retention, stability, and support. The aim of this article was to conduct a literature review on transitional implants to highlight the characteristics of the transitional implants and their advantages, indications, and contraindications, including the level of osseointegration of such implants according to the functional period.

Mechanical behavior of ceramic veneer in zirconia-based restorations: a 3- dimensional finite element analysis using microcomputed tomography data.

Statement Of Problem: The fracture or chipping of ceramic veneers is a common problem for zirconia-based restorations.

Purpose: This study evaluated the stress distribution in the veneer of a maxillary central incisor restored with a complete crown using a zirconia core with a feldspathic ceramic veneer, simulating an incomplete bond between the veneer and zirconia substructure.

Material And Methods: Based on a microcomputed tomography of a maxillary central incisor, 3 finite element models (M) for a complete crown were developed: Mf, a complete crown based on feldspathic ceramic; Mlz, a zirconia-based complete crown with a complete bond at the zirconia/veneer interface; and Mnzl, similar to Mlz, but with an incomplete bond at the zirconia/veneer interface created by using a contact element with a frictional coefficient of 0.

Wax teeth and metallic superstructure trials at the same session: simplified technique for implant-supported prosthesis.

This clinical report describes a method to reduce the number of clinical sessions for the rehabilitation of implant-supported fixed dentures through a simplified and versatile procedure indicated mainly for immediate loading. According to this method, the immediate implant-supported fixed dentures for edentulous patients can be safely fabricated within 2 days. In this technique, the teeth in the wax are prepared on a base of light-polymerized resin, and both wax teeth and metallic superstructure trials are accomplished at the same session.

Computer-guided surgery in implantology: review of basic concepts.

The aim of the present study was to conduct a critical literature review about the technique of computer-guided surgery in implantology to highlight the indications, purposes, immediate loading of implants and complications, protocol of fabrication, and functioning of virtual planning software. This literature review was based on OLDMEDLINE and MEDLINE databases from 2002 to 2010 using the key words "computer-guided surgery" and "implant-supported prosthesis." Thirty-four studies regarding this topic were found.

All-ceramic crowns over single implant zircon abutment. Influence of young's modulus on mechanics.

Purpose: The aim of this study was to evaluate the influence of different Young moduli of the ceramic crown on the distribution of tensions in the region of the abutment-crown interface by making use of 2D finite element analysis.

Materials: Two representative models of a sagittally sectioned maxilla were built through AutoCad program showing an implant in the region of the upper central incisor and were restored by means of IPS e.max Press or Procera AllCeram on zircon abutment.