Understanding the interaction between selected microplastics and the toxic dye "Congo red" in water.

This study thoroughly investigated the adsorption of Congo Red (CR) dye onto various microplastics (MPs), including high-density polyethylene (HDPE), polyvinyl chloride (PVC), low-density polyethylene (LDPE), polypropylene (PP) and polyethylene terephthalate (PET). Initial adsorption capacities (q) revealed that HDPE had the highest value (21.90 mg/g), followed by PVC (4.

Embedded 3D printing of engineered lung cancer model for assisting fine-needle aspiration biopsy.

Lung cancer is a serious global health issue that requires the development of patient-specific, lung cancer model for surgical planning to train interventionalists and improve the accuracy of biopsies. Although the emergence of three-dimensional (3D) printing provides a promising solution to create customized models with complicated architectures, current 3D printing methods cannot accurately duplicate anatomical-level lung constructs with tumor(s) which are applicable for hands-on training and procedure planning. To address this issue, an embedded printing strategy is proposed to create respiratory bronchioles, blood vessels, and tumors in a photocurable yield-stress matrix bath.

Multiscale embedded printing of engineered human tissue and organ equivalents.

Creating tissue and organ equivalents with intricate architectures and multiscale functional feature sizes is the first step toward the reconstruction of transplantable human tissues and organs. Existing embedded ink writing approaches are limited by achievable feature sizes ranging from hundreds of microns to tens of millimeters, which hinders their ability to accurately duplicate structures found in various human tissues and organs. In this study, a multiscale embedded printing (MSEP) strategy is developed, in which a stimuli-responsive yield-stress fluid is applied to facilitate the printing process.

Lab-scale engineered hydrochar production and techno-economic scaling-up analysis.

Despite the extensive use of engineered hydrochar (EHC) for contaminants adsorption in water, little is known about the scaling-up of EHC production which has kept the technology at a low readiness level (TRL). Full-scale EHC production was simulated to help bridge this knowledge gap. A systematic analysis was performed where EHC was produced from rice straw using hydrothermal carbonization (HTC) at 200 °C with iron addition.

Polymer Characterization of Submerged Plastic Litter from Lake Tahoe, United States.

Monitoring plastic litter in the environment is critical to understanding the amount, sources, transport, fate, and environmental impact of this pollutant. However, few studies have monitored plastic litter on lakebeds which are potentially important environments for determining the fate and transport of plastic litter in freshwater basins. In this study, a self-contained underwater breathing apparatus was used for litter collection at the lakebed along five transects in Lake Tahoe, United States.

Isolation and test of novel yeast strains with lignin usage capability and phenolic compound resistance.

Five yeast fungi strains (i.e., two Cryptococcus albidus, one Candida guillermondii, and two Candida tropicalis) were isolated from sugarcane and tested for their use of lignin as sole carbon source and their potential to grow in the presence of phenol and phenol derivatives (i.

Modeling the effect of climate change scenarios on water quality for tropical reservoirs.

Impact of natural phenomena and anthropogenic activities on water quality is closely related with temperature increase and global warming. In this study, the effects of climate change scenarios on water quality forecasts were assessed through correlations, prediction algorithms, and water quality index (WQI) for tropical reservoirs. The expected trends for different water quality parameters were estimated for the 2030-2100 period in association with temperature trends to estimate water quality using historical data from a dam in Mexico.

Biosorption of heavy metals: Transferability between batch and column studies.

The design of an industrial water treatment system using sorption is based on laboratory column tests. To verify the applicability of a column sorption system at industrial scale, it is necessary to determine the system's breakthrough time (BT) in a laboratory setting. In a laboratory column set-up, BT is referred to as the time taken by the adsorbate to appear at column outlet for the first time.

Integrating Tank Model and adsorption/desorption characteristics of filter media to simulate outflow water quantity and quality of a bioretention basin: A case study of biochar-based bioretention basin.

Reliable approaches for accurately assessing the performance of stormwater treatment systems is essential for their effective design, including filter media selection which can be a significant constituent in stormwater treatment systems. This study presents an innovative modelling approach integrating the Tank Model with the adsorption-desorption characteristics of the filter media. The resulting modelling approach was applied to simulate a field-scale bioretention basin where biochar was used as filter media with over ten years of rainfall records.

Indirect effects of COVID-19 on the environment: How deep and how long?

Although the World Health Organization (WHO) announcement released in early March 2020 stated there is no proven evidence that the COVID-19 virus can survive in drinking water or sewage, there has been some recent evidence that coronaviruses can survive in low-temperature environments and in groundwater for more than a week. Some studies have also found SARS-CoV-2 genetic materials in raw municipal wastewater, which highlights a potential avenue for viral spread. A lack of information about the presence and spread of COVID-19 in the environment may lead to decisions based on local concerns and prevent the integration of the prevalence of SARS-CoV-2 into the global water cycle.

Emerging materials and technologies for landfill leachate treatment: A critical review.

Sanitary landfill is the most popular way to dispose solid wastes with one major drawback: the generation of landfill leachate resulting from percolation of rainfall through exposed landfill areas or infiltration of groundwater into the landfill. The landfill leachate impacts on the environment has forced authorities to stipulate more stringent requirements for pollution control, generating the need for innovative technologies to eliminate waste degradation by-products incorporated in the leachate. Natural attenuation has no effect while conventional treatment processes are not capable of removing some the pollutants contained in the leachate which are reported to reach the natural environment, the aquatic food web, and the anthroposphere.

Impacts of COVID-19 pandemic on the wastewater pathway into surface water: A review.

With global number of cases 106 million and death toll surpassing 2.3 million as of mid-February 2021, the COVID-19 pandemic is certainly one of the major threats that humankind have faced in modern history. As the scientific community navigates through the overwhelming avalanche of information on the multiple health impacts caused by the pandemic, new reports start to emerge on significant ancillary effects associated with the treatment of the virus.

Discoloration of azo dye Brown HT using different advanced oxidation processes.

In this study, known combinations of Advanced Oxidation Processes (AOPs, namely Electro-Fenton (EF), Photo-Electro-Fenton (PEF), Electro-Oxidation (EO), and EO/Ozone (O) were compared for the discoloration of tannery industry azo dye Brown HT (BHT). The different AOPs were tested in a 0.160 L batch electrochemical stirred thank reactor using Boron Doped Diamond (BDD) electrodes.

Peroxymonosulfate decomposition by homogeneous and heterogeneous Co: Kinetics and application for the degradation of acetaminophen.

Peroxymonosulfate (PMS) decomposition, hydroxyl radical (OH) generation, and acetaminophen (ACT) degradation by the Co/PMS system using homogeneous (dissolved cobalt) and heterogeneous (suspended CoO) cobalt were assessed. For the homogeneous process, >99% PMS decomposition was observed and 10 mmol/L of OH generation was produced using 5 mmol/L of PMS and different dissolved cobalt concentrations after 30 min. A dissolved cobalt concentration of 0.

Resource efficiency analysis for photocatalytic degradation and mineralization of estriol using TiO nanoparticles.

A resource efficiency analysis was developed that evaluated photocatalyst loading and temperature inputs, and assessed hydroxyl radical (OH) production. Catalyst loading (Aeroxide TiO P25) between 1 and 1500 mg L and temperatures between 5 and 50 °C were analyzed as input resources for OH production. After, the best experimental conditions were used to degrade and mineralize estriol (E3).

Treatment of industrial effluents by electrochemical generation of H2O2 using an RVC cathode in a parallel plate reactor.

Electrochemical techniques have been used for the discolouration of synthetic textile industrial wastewater by Fenton's process using a parallel plate reactor with a reticulated vitreous carbon (RVC) cathode. It has been shown that RVC is capable of electro-generating and activating H2O2 in the presence of Fe(2+) added as catalyst and using a stainless steel mesh as anode material. A catholyte comprising 0.

Degradation of 1-hydroxy-2,4-dinitrobenzene from aqueous solutions by electrochemical oxidation: role of anodic material.

Electrochemical oxidation (ECOx) of 1-hydroxy-2,4-dinitrobenzene (or 2,4-dinitrophenol: 2,4-DNP) in aqueous solutions by electrolysis under galvanostatic control was studied at Pb/PbO2, Ti/SnO2, Ti/IrxRuySnO2 and Si/BDD anodes as a function of current density applied. Oxidative degradation of 2,4-DNP has clearly shown that electrode material and the current density applied were important parameters to optimize the oxidation process. It was observed that 2,4-DNP was oxidized at few substrates to CO2 with different results, obtaining good removal efficiencies at Pb/PbO2, Ti/SnO2 and Si/BDD anodes.

Scaling-up parameters for site restoration process using surfactant-enhanced soil washing coupled with wastewater treatment by Fenton and Fenton-like processes.

Estimation of scaling-up parameters for a site restoration process using a surfactant-enhanced soil washing (SESW) process followed by the application of advanced oxidation processes (Fenton and photo-Fenton) was performed. For the SESW, different parameters were varied and the soil washing efficiency for pesticide (2,4-D) removal assessed. The resulting wastewater was treated using the Fenton reaction in the absence and presence of ultraviolet (UV) radiation for pesticide removal.

Inactivation of Ascaris eggs in water using sequential solar driven photo-Fenton and free chlorine.

Sequential helminth egg inactivation using a solar driven advanced oxidation process (AOP) followed by chlorine was achieved. The photo-assisted Fenton process was tested alone under different H(2)O(2) and/or Fe(II) concentrations to assess its ability to inactivate Ascaris suum eggs. The effect of free chlorine alone was also tested.

Coagulation-flocculation process applied to wastewaters generated in hydrocarbon-contaminated soil washing: Interactions among coagulant and flocculant concentrations and pH value.

Wastewater produced in the contaminated soil washing was treated by means of coagulation-flocculation (CF) process. The wastewater contained petroleum hydrocarbons, a surfactant, i.e.

Wastewater disinfection and organic matter removal using ferrate (VI) oxidation.

The use of iron in a +6 valence state, (Fe (VI), as FeO4(-2)) was tested as a novel alternative for wastewater disinfection and decontamination. The removal of organic matter (OM) and index microorganisms present in an effluent of a wastewater plant was determined using FeO4(-2) without any pH adjustment. It was observed that concentrations of FeO4(-2) ranging between 5 and 14 mg l(-1) inactivated up to 4-log of the index microorganisms (initial concentration c.

Passive air sampling of organochlorine pesticides in Mexico.

The spatial and temporal variation of organochlorine pesticides (OCs) in air across Mexico was investigated by deploying passive samplers at eleven stations across the country during 2005-2006. Integrated samples were taken over three-month periods and quantified for DDT compounds, endosulfans, toxaphenes, components of technical chlordane, hexachlorocyclohexanes (HCHs), and dieldrin. Enantiomers of chiral chlordanes and o,p'-DDT were determined on chiral stationary phase columns as an indicator of source and age.

Enhancing the electrochemical oxidation of acid-yellow 36 azo dye using boron-doped diamond electrodes by addition of ferrous ion.

This work shows preliminary results on the electrochemical oxidation process (EOP) using boron-doped diamond (BDD) electrode for acidic yellow 36 oxidation, a common azo dye used in textile industry. The study is centred in the synergetic effect of ferrous ions and hydroxyl free radicals for improving discoloration of azo dye. The assays were carried out in a typical glass cell under potentiostatic conditions.

Decontamination of soil washing wastewater using solar driven advanced oxidation processes.

Decontamination of soil washing wastewater was performed using two different solar driven advanced oxidation processes (AOPs): the photo-Fenton reaction and the cobalt/peroxymonosulfate/ultraviolet (Co/PMS/UV) process. Complete sodium dodecyl sulphate (SDS), the surfactant agent used to enhance soil washing process, degradation was achieved when the Co/PMS/UV process was used. In the case of photo-Fenton reaction, almost complete SDS degradation was achieved after the use of almost four times the actual energy amount required by the Co/PMS/UV process.

Degradation of sodium dodecyl sulphate in water using solar driven Fenton-like advanced oxidation processes.

Synthetic wastewater samples containing a model surfactant were treated using two different Fenton-like advanced oxidation processes promoted by solar radiation; the photo-Fenton reaction and Co/PMS/UV processes. Comparison between the different experimental conditions was performed by means of the overall surfactant degradation achieved and by obtaining the initial rate in the first 15 min of reaction (IR15). It was found that, for dark Fenton reaction, the maximum surfactant degradation achieved was 14% under low iron and oxidant concentration.