Percussion drilling in glasses and process dynamics with femtosecond laser GHz-bursts.

We report for the first time to our knowledge on top-down percussion drilling of high-quality deep holes in different glasses with femtosecond laser pulses in GHz-burst mode. We reveal the dynamics of the percussion drilling process by pump-probe shadowgraphy and thermal camera imaging demonstrating that the drilling process in GHz-burst mode is fundamentally different from single-pulse processing and confirming the presence of thermal accumulation. Moreover, we show a comparison to drilling by femtosecond single-pulses containing an equal laser fluence in sodalime, alkali-free alumina-borosilicate, fused silica, and sapphire.

Systematic study of laser ablation with GHz bursts of femtosecond pulses.

We report on crater formation, line scribing and cavity milling experiments on Silicon, Copper, Aluminum and stainless steel with GHz bursts of femtosecond pulses. The intra-burst repetition rate has been varied between 0.88 and 3.

High-efficiency femtosecond ablation of silicon with GHz repetition rate laser source.

We report on silicon ablation with a 20 W GHz amplified femtosecond laser source. This novel laser delivers burst energies up to 400 μJ, providing flexible intra-pulse repetition rates of 0.88 or 3.

Simple Yb:YAG femtosecond booster amplifier using divided-pulse amplification.

A hybrid-system approach using a low-gain Yb:YAG single crystal booster amplifier behind a state-of-the-art industrial high-power femtosecond fiber system is studied to significantly increase the output pulse energy of the fiber amplifier. With this system, more than 60 W of average power is demonstrated at 100 kHz for pulse duration of 400 fs, corresponding to an energy per pulse of 600 µJ. Reducing the repetition rate, the energy is increased up to 2.

Hybrid high-energy high-power pulsewidth-tunable picosecond source.

A hybrid ytterbium-doped fiber-bulk laser source allowing the generation of 3 ps, 350 μJ, 116 MW peak power Fourier transform-limited pulses at 50 kHz repetition rate and 1030 nm wavelength is described. Pulse duration tunability is provided by an adjustable spectral compression-based seeder system. Energy scaling capabilities of the architecture by use of the divided-pulse amplification method are investigated.

Nonlinear compression of high energy fiber amplifier pulses in air-filled hypocycloid-core Kagome fiber.

We report on the generation of 34 fs and 50 µJ pulses from a high energy fiber amplifier system with nonlinear compression in an air-filled hypocycloid-core Kagome fiber. The unique properties of such fibers allow bridging the gap between solid core fibers-based and hollow capillary-based post-compression setups, thereby operating with pulse energies obtained with current state-of-the-art fiber systems. The overall transmission of the compression setup is over 70%.

High-energy chirped- and divided-pulse Sagnac femtosecond fiber amplifier.

We report on the generation of 1.1-mJ, 300-fs pulses at 50 kHz by implementing an amplifier architecture whereby four stretched pulse replicas are created in the temporal and spatial domains, allowing pulse energy scaling by the same factor. The whole spatiotemporal coherent combining geometry is passive, avoiding the need for active electronic stabilization loop systems.

Generation of 150-fs pulses from a diode-pumped Yb:KYW nonlinear regenerative amplifier.

Generation of sub-150-fs-level pulses has been obtained from an Yb-doped crystal-based regenerative amplifier by applying an innovative amplification scheme. This scheme is based on optimization of the linear and non-linear phase during the amplification process inside the regenerative amplifier cavity. This technique with Yb:KYW allows to achieve pulse durations from diode-pumped Yb-doped regenerative amplifiers that were up to now only accessible with more complex Ti:sapphire amplifiers.

Two-channel pulse synthesis to overcome gain narrowing in femtosecond fiber amplifiers.

We demonstrate spectral coherent beam combining of two femtosecond fiber chirped-pulse amplifiers seeded by a common oscillator. Using active phase stabilization based on an electro-optic phase modulator, an average power of 10 W before compression and a high gain factor of 30 dB are obtained. At this gain value, 130 fs pulses with a spectral width of 19 nm can be generated, highlighting the strong potential of pulse synthesis for the reduction of the minimum duration of ultrashort pulses in fiber chirped-pulse amplifiers.

Sub-100-fs Yb:CALGO nonlinear regenerative amplifier.

We report on the first diode-pumped Yb:CaGdAlO4 regenerative amplifier in the sub-100-fs regime. It generates pulses at a central wavelength of 1047 nm with up to 24 μJ energy (after compression) at a repetition rate of 50 kHz. The measured pulse duration is 97 fs, with a spectral bandwidth of 19 nm.

Energy scaling of a nonlinear compression setup using passive coherent combining.

Passive spatial and temporal coherent combining schemes are implemented to scale the output energy of a nonlinear temporal compression setup. By generating 32 replicas of the incident femtosecond pulses, the output of a high-energy fiber chirped-pulse amplifier can be compressed using self-phase modulation in a large-mode-area rod-type fiber at peak-power levels well beyond the self-focusing power. We demonstrate the generation of 71 fs 7.

Yb:YAG single crystal fiber power amplifier for femtosecond sources.

We demonstrate a versatile femtosecond power amplifier using a Yb:YAG single crystal fiber operating from 10 kHz to 10 MHz. For a total pump power of 75 W, up to 30 W is generated from the double-pass power amplifier. At a repetition rate of 10 kHz, an output energy of 1 mJ is obtained after recompression.

Femtosecond fiber chirped- and divided-pulse amplification system.

We implement both chirped pulse amplification and divided pulse amplification in the same femtosecond fiber amplifier setup. This scheme allows an equivalent stretched pulse duration of 2.4 ns in a compact tabletop system.

Passive coherent beam combining of two femtosecond fiber chirped-pulse amplifiers.

We propose and demonstrate an architecture that achieves passive coherent combination of two femtosecond fiber chirped-pulse amplifiers. The setup consists in the use of a well-balanced amplifying Sagnac interferometer. The experiment shows that the temporal, spectral, and spatial qualities of each beam are retained, with the generation of 250 fs pulses at 35 MHz repetition rate, an uncompressed average power of 10 W, and a combining efficiency of 96%.

Temporal cleaning of a high-energy fiber-based ultrafast laser using cross-polarized wave generation.

We report the use of cross-polarized wave generation to perform both pulse shortening and temporal cleaning of a high-energy ytterbium-doped fiber-based femtosecond laser system. The nonlinear processes allow both a highly efficient nonlinear conversion of 20% and a large compression ratio of 3.5, with inherently improved coherent and incoherent contrasts.

Direct amplification of ultrashort pulses in μ-pulling-down Yb:YAG single crystal fibers.

We demonstrated that Yb:YAG single crystal fibers have a strong potential for the amplification of femtosecond pulses. Seeded by 230 fs pulses with an average power of 400 mW at 30 MHz delivered by a passively mode-locked Yb:KYW oscillator, the system produced 330 fs pulses with an average power of 12 W. This is the shortest pulse duration ever produced by an Yb:YAG amplifier.

Polarized multiplex coherent anti-Stokes Raman scattering using a picosecond laser and a fiber supercontinuum.

We perform multiplex coherent anti-Stokes Raman scattering (CARS) micro-spectroscopy with a picosecond pulsed laser and a broadband supercontinuum (SC) generated in photonic crystal fiber. CARS signal stability is achieved using an active fiber coupler that avoids thermal and mechanical drifts. We obtain multiplex CARS spectra for test liquids in the 600-2000 cm(-1) spectral range.

Short-pulse and high-repetition-rate diode-pumped Yb:CaF2 regenerative amplifier.

We present a diode-pumped regenerative amplifier based on an Yb:CaF(2) crystal optimized to produce short pulses for various repetition rates ranging from 100 Hz to 10 kHz. The shortest pulse duration generated is 178 fs, and the corresponding energy is 1.4 mJ before compression (620 microJ after), at a repetition rate of 500 Hz for 16 W of pump power.

Novel diode-pumped infrared tunable laser system for multi-photon microscopy.

We report on a novel laser source, emitting high energy (20 nanoJoule) femtosecond pulses, in a broad spectrum (250 nm). This source is easily tuned from 950 to 1200 nm, without any laser adjustment, and delivers sub-300 femtosecond pulses with a 10-nm spectral width.