Wearable telescopic contact lens.

We describe the design, fabrication, and testing of a 1.6 mm thick scleral contact lens providing both 1× and 2.8× magnified vision paths, intended for use as a switchable eye-borne telescopic low-vision aid.

Switchable telescopic contact lens.

We present design and first demonstration of optics for a telescopic contact lens with independent optical paths for switching between normal and magnified vision. The magnified optical path incorporates a telescopic arrangement of positive and negative annular concentric reflectors to achieve 2.8 x magnification on the eye, while light passing through a central clear aperture provides unmagnified vision.

An optomechanical model eye for ophthalmological refractive studies.

Purpose: To create an accurate, low-cost optomechanical model eye for investigation of refractive errors in clinical and basic research studies.

Methods: An optomechanical fluid-filled eye model with dimensions consistent with the human eye was designed and fabricated. Optical simulations were performed on the optomechanical eye model, and the quantified resolution and refractive errors were compared with the widely used Navarro eye model using the ray-tracing software ZEMAX (Radiant Zemax, Redmond, WA).

Two-axis solar tracking accomplished through small lateral translations.

High-concentration solar-power optics require precise two-axis tracking. The planar micro-optic solar concentrator uses a lenslet array over a planar waveguide with small reflective facets at the focal point of each lenslet to couple incident light into the waveguide. The concentrator can use conventional tracking, tilting the entire assembly, but the system geometry also allows tracking by small lateral translation of the lenslet relative to the waveguide.

Design and scaling of monocentric multiscale imagers.

Monocentric multi-scale (MMS) lenses are a new approach to high-resolution wide-angle imaging, where a monocentric objective lens is shared by an array of identical rotationally symmetric secondary imagers that each acquire one overlapping segment of a mosaic. This allows gigapixel images to be computationally integrated from conventional image sensors and relatively simple optics. Here we describe the MMS design space, introducing constraints on image continuity and uniformity, and show how paraxial system analysis can provide both volume scaling and a systematic design methodology for MMS imagers.

Reactive self-tracking solar concentrators: concept, design, and initial materials characterization.

Étendue limits angular acceptance of high-concentration photovoltaic systems and imposes precise two-axis mechanical tracking. We show how a planar micro-optic solar concentrator incorporating a waveguide cladding with a nonlinear optical response to sunlight can reduce mechanical tracking requirements. Optical system designs quantify the required response: a large, slow, and localized increase in index of refraction.

Microcamera aperture scale in monocentric gigapixel cameras.

Multiscale cameras achieve wide-angle, high-resolution imaging by combining coarse image formation by a simplified wide-field objective with localized aberration correction in an array of narrow field microcameras. Microcamera aperture size is a critical parameter in multiscale design; a larger aperture has greater capacity to correct aberration but requires a more complex microcamera optic. A smaller aperture requires integration of more microcameras to cover the field.

Orthogonal and secondary concentration in planar micro-optic solar collectors.

Planar micro-optic concentrators are passive optical structures which combine a lens array with faceted microstructures to couple sunlight into a planar slab waveguide. Guided rays propagate within the slab to edge-mounted photovoltaic cells. This paper provides analysis and preliminary experiments describing modifications and additions to the geometry which increase concentration ratios along both the vertical and orthogonal waveguide axes.

Planar micro-optic solar concentrator.

We present a new approach to solar concentration where sunlight collected by each lens in a two-dimensional lens array is coupled into a shared, planar waveguide using localized features placed at each lens focus. This geometry yields a thin, flat profile for moderate concentration systems which may be fabricated by low-cost roll manufacture. We provide analyses of tradeoffs and show optimized designs can achieve 90% and 82% optical efficiency at 73x and 300x concentration, respectively.

Ultrathin four-reflection imager.

We present the design and experimental demonstration of an ultrathin four-reflection imager. The F/1.15 prototype imager achieves a focal length of 18.

Relaxing the alignment and fabrication tolerances of thin annular folded imaging systems using wavefront coding.

Annular folded imagers can be up to 10x thinner than corresponding full-aperture imagers, but have tight fabrication tolerances and relatively shallow depth of focus. Wavefront coding, the use of specialized optics with postdetection signal processing, has been used to improve the depth of focus in full-aperture imaging systems. Here we explore the application of wavefront coding to annular folded optics.

Ultrathin cameras using annular folded optics.

We present a reflective multiple-fold approach to visible imaging for high-resolution, large aperture cameras of significantly reduced thickness. This approach allows for reduced bulk and weight compared with large high-quality camera systems and improved resolution and light collection compared with miniature conventional cameras. An analysis of the properties of multiple-fold imagers is presented along with the design, fabrication, and testing of an eightfold prototype camera.