Transferable Percolated Particle Monolayers Derived from Marangoni Flows for Thermally Conductive Dielectric Coatings.

Thermal management is becoming one of the most significant design and size limitations for high power density electronics, including motherboards, power converters, and phased array antennas for 5G communications. There are few options for conducting heat away with dielectric materials that avoid shortening or distorting the performance of these electronics. Certain highly thermally conductive 2D and 3D materials, including hexagonal boron nitride and diamond, offer ideal material properties to address these issues but are extremely challenging to process.

Understanding hydrodynamic wear in self-similar superhydrophobic coatings subjected to rapid droplet impacts.

Superhydrophobic materials rely on both chemical apolarity and surface roughness to achieve the high contact angles and the low roll-off angles that lead to self-cleaning and antibacterial properties. Current superhydrophobic coatings tend to be delicate and lose their properties easily when subjected to droplet impact. Such impact deteriorates these coatings through hydrodynamic wear; changing structure, eroding hydrophobic chemistry, and quickly leading to full wet out of the substrate.

Thermoformable Boron Nitride Based All-Ceramics.

Thermoforming processing, traditionally reserved for thermoplastic polymers and sheet metals, is extended here to boron-based all-ceramics. Specifically, sintered boron nitride composite sheets manufactured via a combined vibration and tape-casting photopolymerization process exhibit a highly oriented microstructure that allows these preform sheets to flow as viscous Bingham pseudoplastics during compression molding. These sintered all-ceramic preforms are thermoformed into thin, complex parts with features down to 200 µm.

Increasing efficiency and accuracy of magnetic interaction calculations in colloidal simulation through machine learning.

Calculating the magnetic interaction between magnetic particles that are positioned in close proximity to one another is a surprisingly challenging task. Exact solutions for this interaction exist either through numerical expansion of multipolar interactions or through solving Maxwell's equations with a finite element solver. These approaches can take hours for simple configurations of three particles.

Brain/blood ratios of methadone and ABCB1 polymorphisms in methadone-related deaths.

Methadone is an opioid that often leads to fatalities. Interpretation of toxicological findings can be challenging if no further information about the case history is available. The aims of this study were (1) to determine whether brain/blood ratios can assist in the interpretation of methadone findings in fatalities; (2) to examine whether polymorphisms in the gene encoding the P-glycoprotein (also known as multidrug resistance protein 1 (MDR1) or ATP-binding cassette sub-family B member 1 (ABCB1)), which functions as a multispecific efflux pump in the blood-brain barrier, affect brain/blood ratios of methadone.

Crack path selection in orientationally ordered composites.

While cracks in isotropic homogeneous materials propagate straight, perpendicularly to the tensile axis, cracks in natural and synthetic composites deflect from a straight path, often increasing the toughness of the material. Here we combine experiments and simulations to identify materials properties that predict whether cracks propagate straight or kink on a macroscale larger than the composite microstructure. Those properties include the anisotropy of the fracture energy, which we vary several fold by increasing the volume fraction of orientationally ordered alumina (Al_{2}O_{3}) platelets inside a polymer matrix, and a microstructure-dependent process zone size that is found to modulate the additional stabilizing or destabilizing effect of the nonsingular stress acting parallel to the crack.

Ectopic Methylation of a Single Persistently Unmethylated CpG in the Promoter of the Vitellogenin Gene Abolishes Its Inducibility by Estrogen through Attenuation of Upstream Stimulating Factor Binding.

The enhancer/promoter of the vitellogenin II gene () has been extensively studied as a model system of vertebrate transcriptional control. While deletion mutagenesis and footprinting identified the transcription factor (TF) binding sites governing its tissue specificity, DNase hypersensitivity and DNA methylation studies revealed the epigenetic changes accompanying its hormone-dependent activation. Moreover, upon induction with estrogen (E), the region flanking the estrogen-responsive element (ERE) was reported to undergo active DNA demethylation.

Enhanced diffusion and magnetophoresis of paramagnetic colloidal particles in rotating magnetic fields.

Dispersions of paramagnetic colloids can be manipulated with external magnetic fields to assemble structures via dipolar assembly and control transport via magnetophoresis. For fields held steady in time, the dispersion structure and dynamic properties are coupled. This coupling can be problematic when designing processes involving field-induced forces, as particle aggregation competes against and hinders particle transport.

Polypropylene crystallization at an alumina interface using single walled carbon nanotubes.

Interfaces play an important and often limiting role in the mechanical, thermal, and electrical performance of composite materials. Here we suggest a novel method to improve the interfacial interaction in polypropylene-alumina composites using single-walled carbon nanotubes (SWNTs) to nucleate lamellar crystals at the interface. Macroscopic alumina substrates are used to determine the ideal crystallization parameters and investigate the kinetics of crystal growth.

Paramagnetic colloids: Chaotic routes to clusters and molecules.

We present computer simulations and experiments on dilute suspensions of superparamagnetic particles subject to rotating magnetic fields. We focus on chains of four particles and their decay routes to stable structures. At low rates, the chains track the external field.

Assembling particle clusters with incoherent 3D magnetic fields.

Directed assembly of particle suspensions in massively parallel formats, such as with magnetic fields, has application in rheological control, smart drug delivery, and active colloidal devices from optical materials to microfluidics. At the heart of these applications lies a control optimization problem for driving the assembly and dissolution of highly monodisperse particle clusters. For magnetic field control, most attention to-date has been centered around in-phase coherent magnetic fields.

Microbial Biofilm Community Variation in Flowing Habitats: Potential Utility as Bioindicators of Postmortem Submersion Intervals.

Biofilms are a ubiquitous formation of microbial communities found on surfaces in aqueous environments. These structures have been investigated as biomonitoring indicators for stream heath, and here were used for the potential use in forensic sciences. Biofilm successional development has been proposed as a method to determine the postmortem submersion interval (PMSI) of remains because there are no standard methods for estimating the PMSI and biofilms are ubiquitous in aquatic habitats.

Designing bioinspired composite reinforcement architectures via 3D magnetic printing.

Discontinuous fibre composites represent a class of materials that are strong, lightweight and have remarkable fracture toughness. These advantages partially explain the abundance and variety of discontinuous fibre composites that have evolved in the natural world. Many natural structures out-perform the conventional synthetic counterparts due, in part, to the more elaborate reinforcement architectures that occur in natural composites.

The Potential of High-throughput Metagenomic Sequencing of Aquatic Bacterial Communities to Estimate the Postmortem Submersion Interval.

Human remains can be discovered in freshwater or marine ecosystems, circumstances where insects and other invertebrates have infrequently been used for understanding the time of postmortem submersion. In this study, the identification and succession of epinecrotic bacterial communities on vertebrate remains were described during decomposition in a temperate headwater stream during two seasons (summer and winter). Bacterial communities were characterized with 454 pyrosequencing and analyzed at phyletic and generic taxonomic resolutions.

Toward Accumulation of Magnetic Nanoparticles into Tissues of Small Porosity.

Magnetic concentration of drug-laden magnetic nanoparticles has been proven to increase the delivery efficiency of treatment by 2-fold. In these techniques, particles are concentrated by the presence of a magnetic source that delivers a very high magnetic field and a strong magnetic field gradient. We have found that such magnetic conditions cause even 150 nm particles to aggregate significantly into assemblies that exceed several micrometers in length within minutes.

Understanding and overcoming shear alignment of fibers during extrusion.

Fiber alignment is the defining architectural characteristic of discontinuous fiber composites and is dictated by shear-dominated processing techniques including flow-injection molding, tape-casting, and mold-casting. However, recent colloidal assembly techniques have started to employ additional forces in fiber suspensions that have the potential to change the energy landscape of the shear-dominated alignment in conditions of flow. In this paper, we develop an energetics model to characterize the shear-alignment of rigid fibers under different flow conditions in the presence of magnetic colloidal alignment forces.

Bioinspired materials that self-shape through programmed microstructures.

Nature displays numerous examples of materials that can autonomously change their shape in response to external stimuli. Remarkably, shape changes in biological systems can be programmed within the material's microstructure to enable self-shaping capabilities even in the absence of cellular control. Here, we revisit recent attempts to replicate in synthetic materials the shape-changing behavior of selected natural materials displaying deliberately tuned fibrous architectures.

Mass spectrometric methods for monitoring redox processes in electrochemical cells.

Electrochemistry (EC) is a mature scientific discipline aimed to study the movement of electrons in an oxidation-reduction reaction. EC covers techniques that use a measurement of potential, charge, or current to determine the concentration or the chemical reactivity of analytes. The electrical signal is directly converted into chemical information.

Studying the reducing potencies of antioxidants with the electrochemistry inherently present in electrospray ionization-mass spectrometry.

In this proof-of-principle study, the applicability of electrospray ionization-mass spectrometry (ESI-MS) to characterize the reducing potencies of natural antioxidants is demonstrated. The ESI source represents a controlled-current electrochemical cell. The interfacial potential at the emitter electrode will be at or near the electrochemical potential of those reactions that sufficiently supply all the required current for the ESI circuit.

Ultrahigh magnetically responsive microplatelets with tunable fluorescence emission.

Tuning the optical properties of suspensions by controlling the orientation and spatial distribution of suspended particles with magnetic fields is an interesting approach to creating magnetically controlled displays, microrheology sensors, and materials with tunable light emission. However, the relatively high concentration of magnetic material required to manipulate these particles very often reduces the optical transmittance of the system. In this study, we describe a simple method of generating particles with magnetically tunable optical properties via sol-gel deposition and functionalization of a continuous layer of silica on ultrahigh magnetically responsive (UHMR) alumina microplatelets.

Comparison of mobile-phase systems commonly applied in liquid chromatography-mass spectrometry of nucleic acids.

LC-MS represents an important technology for the qualitative and quantitative analysis of nucleic acids. For MS, ESI in negative ion mode is used. The chromatographic method of choice is ion-pair (IP) RP chromatography.

Mechanics of platelet-reinforced composites assembled using mechanical and magnetic stimuli.

Current fabrication technologies of structural composites based on the infiltration of fiber weaves with a polymeric resin offer good control over the orientation of long reinforcing fibers but remain too cumbersome and slow to enable cost-effective manufacturing. The development of processing routes that allow for fine control of the reinforcement orientation and that are also compatible with fast polymer processing technologies remains a major challenge. In this paper, we show that bulk platelet-reinforced composites with tailored reinforcement architectures and mechanical properties can be fabricated through the directed-assembly of inorganic platelets using combined magnetic and mechanical stimuli.

Association of polymorphisms in pharmacogenetic candidate genes (OPRD1, GAL, ABCB1, OPRM1) with opioid dependence in European population: a case-control study.

It is becoming increasingly evident that genetic variants contribute to the development of opioid addiction. An elucidation of these genetic factors is crucial for a better understanding of this chronic disease and may help to develop novel therapeutic strategies. In recent years, several candidate genes were implicated in opioid dependence.

Self-shaping composites with programmable bioinspired microstructures.

Shape change is a prevalent function apparent in a diverse set of natural structures, including seed dispersal units, climbing plants and carnivorous plants. Many of these natural materials change shape by using cellulose microfibrils at specific orientations to anisotropically restrict the swelling/shrinkage of their organic matrices upon external stimuli. This is in contrast to the material-specific mechanisms found in synthetic shape-memory systems.

Stretchable heterogeneous composites with extreme mechanical gradients.

Heterogeneous composite materials with variable local stiffness are widespread in nature, but are far less explored in engineering structural applications. The development of heterogeneous synthetic composites with locally tuned elastic properties would allow us to extend the lifetime of functional devices with mechanically incompatible interfaces, and to create new enabling materials for applications ranging from flexible electronics to regenerative medicine. Here we show that heterogeneous composites with local elastic moduli tunable over five orders of magnitude can be prepared through the site-specific reinforcement of an entangled elastomeric matrix at progressively larger length scales.