Long-Range Ballistic Propagation of 80% Excitonic Fraction Polaritons in a Perovskite Metasurface at Room Temperature.

Exciton-polaritons, hybrid light-matter excitations arising from the strong coupling between excitons in semiconductors and photons in photonic nanostructures, are crucial for exploring the physics of quantum fluids of light and developing all-optical devices. Achieving room temperature propagation of polaritons with a large excitonic fraction is challenging but vital, e.g.

Influence of arylalkyl amines on the formation of hybrid CsPbBr nanocrystals a modified LARP method.

Perovskite nanocrystals have attracted much attention in the last ten years due to their different applications, especially in the photovoltaic domain and LED performance. In this large family of perovskite nanocrystals, CsPbBr nanocrystals are attractive nanomaterials because they are good candidates for obtaining green emissions and exploring new synthesis routes. In this context, controlling the nanometric scale's morphology, particularly the size and monodispersity, is fundamental for exploring their photophysical properties and final applications.

Taming Friedrich-Wintgen Interference in a Resonant Metasurface: Vortex Laser Emitting at an On-Demand Tilted Angle.

Friedrich-Wintgen (FW) interference is an atypical coupling mechanism that grants loss exchange between leaky resonances in non-Hermitian classical and quantum systems. Intriguingly, such a mechanism makes destructive interference possible for scenarios in which a radiating wave becomes a bound state in the continuum (BIC) by giving away all of its losses. Here we propose and demonstrate experimentally an original concept to tailor FW-BICs with polarization singularity at on-demand wavevectors in an optical metasurface.

Unexpected Anisotropy of the Electron and Hole Landé g-Factors in Perovskite CHNHPbI Polycrystalline Films.

In this work, we studied, at low temperature, the coherent evolution of the localized electron and hole spins in a polycrystalline film of CH3NH3PbI3 (MAPI) by using a picosecond-photo-induced Faraday rotation technique in an oblique magnetic field. We observed an unexpected anisotropy for the electron and hole spin. We determined the electron and hole Landé factors when the magnetic field was applied in the plane of the film and perpendicular to the exciting light, denoted as transverse ⟂ factors, and when the magnetic field was applied perpendicular to the film and parallel to the exciting light, denoted as parallel ∥ factors.

Synthesis of highly calibrated CsPbBr nanocrystal perovskites by soft chemistry.

A new synthetic method for preparing highly calibrated CsPbBr nanocrystal perovskites is described and analyzed using high-resolution scanning transmission electron microscopy. This new method based on soft chemistry leads to the large-scale production of nanocrystals. Such monodisperse nanocrystals allow for the deposition of homogeneous films, which provides new opportunities for the next generation of optoelectronic devices.

Electron Dynamics in Hybrid Perovskites Reveal the Role of Organic Cations on the Screening of Local Charges.

The large tolerance of hybrid perovksites to the trapping of electrons by defects is a key asset in photovoltaic applications. Here, the ionic surface terminations of CHNHPbI are employed as a testbed to study the effect of electrostatic fields on the dynamics of excited carriers. We characterize the transition across the tetragonal to orthorhombic phase.

Tetrazine molecules as an efficient electronic diversion channel in 2D organic-inorganic perovskites.

Taking advantage of an innovative design concept for layered halide perovskites with active chromophores acting as organic spacers, we present here the synthesis of two novel two-dimensional (2D) hybrid organic-inorganic halide perovskites incorporating for the first time 100% of a photoactive tetrazine derivative as the organic component. Namely, the use of a heterocyclic ring containing a nitrogen proportion imparts a unique electronic structure to the organic component, with the lowest energy optical absorption in the blue region. The present compound, a tetrazine, presents several resonances between the organic and inorganic components, both in terms of single particle electronic levels and exciton states, providing the ideal playground to discuss charge and energy transfer mechanisms at the organic/inorganic interface.

Energy Tuning of Electronic Spin Coherent Evolution in Methylammonium Lead Iodide Perovskites.

We investigated the coherent evolution of the electronic spin at low temperature in high-quality CHNHPbI polycrystalline films by picosecond-resolved photoinduced Faraday rotation. We show that this coherent evolution can be tuned by choosing the pump-probe energy within the lowest optical-absorption band, and we explain it as the result of two main contributions: the localized electron and the localized hole. Their corresponding amplitude ratios are constant across the lowest absorption band-an observation which disqualifies a free exciton from being at the origin of the electronic spin coherent evolution.

Perovskite semiconductors for room-temperature exciton-polaritonics.

Lead-halide perovskites are generally excellent light emitters and can have larger exciton binding energies than thermal energy at room temperature, exhibiting great promise for room-temperature exciton-polaritonics. Rapid progress has been made recently, although challenges and mysteries remain in lead-halide perovskite semiconductors to push polaritons to room-temperature operation. In this Perspective, we discuss fundamental aspects of perovskite semiconductors for exciton-polaritons and review the recent rapid experimental advances using lead-halide perovskites for room-temperature polaritonics, including the experimental realization of strong light-matter interaction using various types of microcavities as well as reaching the polariton condensation regime in planar microcavities and lattices.

Directing random lasing emission using cavity exciton-polaritons.

Random lasing is an intriguing phenomenon occurring in disordered structures with optical gain in which light scattering provides the necessary feedback for lasing action. Unlike conventional lasers, random lasing systems emit in all directions due to light scattering. While this property can be desired in some cases, directional emission remains required for most applications.

Tailoring Dispersion of Room-Temperature Exciton-Polaritons with Perovskite-Based Subwavelength Metasurfaces.

Exciton-polaritons represent a promising platform for studying quantum fluids of light and realizing prospective all-optical devices. Here we report on the experimental demonstration of exciton-polaritons at room temperature in resonant metasurfaces made from a sub-wavelength two-dimensional lattice of perovskite pillars. The strong coupling regime is revealed by both angular-resolved reflectivity and photoluminescence measurements, showing anticrossing between photonic modes and the exciton resonance with a Rabi splitting in the 200 meV range.

Exciton-Exciton Annihilation in Two-Dimensional Halide Perovskites at Room Temperature.

Recently, Ruddlesden-Popper 2D perovskite (RPP) solar cells and light-emitting diodes (LEDs) have shown promising efficiencies and improved stability in comparison to 3D halide perovskites. Here, the exciton recombination dynamics is investigated at room temperature in pure-phase RPP crystals (CHCHNH)(CHNH)PbI ( = 1, 2, 3, and 4) by time-resolved photoluminescence (TRPL) in a large range of power excitations. As the number of perovskite layers increases, we detect the presence of an increasing fraction of out-of-equilibrium free carriers just after photoexcitation, on a picosecond time scale, while the dynamics is characterized by the recombination of excitons with long lifetime spanning several tens of nanoseconds.

Feature issue introduction: halide perovskites for optoelectronics.

This joint Optics Express and Optical Materials Express feature issue presents a collection of nine papers on the topic of halide perovskites for optoelectronics. Perovskite materials have attracted significant attention over the past four years, initially for their outstanding performance in thin film solar cells, but more recently for applications in light-emitting devices (LEDs and lasers), photodetectors and nonlinear optics. At the same time, there is still much more to learn about the fundamental properties of these materials, and how these depend on composition, processing, and exposure to the environment.

Impact of Reabsorption on the Emission Spectra and Recombination Dynamics of Hybrid Perovskite Single Crystals.

Understanding the surface properties of organic-inorganic lead-based perovskites is of high importance to improve the device's performance. Here, we have investigated the differences between surface and bulk optical properties of CHNHPbBr single crystals. Depth-resolved cathodoluminescence was used to probe the near-surface region on a depth of a few microns.

Narrow Linewidth Excitonic Emission in Organic-Inorganic Lead Iodide Perovskite Single Crystals.

Hybrid perovskite thin films have demonstrated impressive performance for solar energy conversion and optoelectronic applications. However, further progress will benefit from a better knowledge of the intrinsic photophysics of materials. Here, the temperature-dependent emission properties of CHNHPbI single crystals are investigated and compared to those of thin polycrystalline films by means of steady-state and time-resolved photoluminescence spectroscopy.

Multinuclear NMR as a tool for studying local order and dynamics in CHNHPbX (X = Cl, Br, I) hybrid perovskites.

We report on Pb, Br, N, H, C and H NMR experiments for studying the local order and dynamics in hybrid perovskite lattices. Pb NMR experiments conducted at room temperature on a series of MAPbX compounds (MA = CHNH; X = Cl, Br and I) showed that the isotropic Pb NMR shift is strongly dependent on the nature of the halogen ions. Therefore Pb NMR appears to be a very promising tool for the characterisation of local order in mixed halogen hybrid perovskites.

Using Low Temperature Photoluminescence Spectroscopy to Investigate CH₃NH₃PbI₃ Hybrid Perovskite Degradation.

Investigating the stability and evaluating the quality of the CH₃NH₃PbI₃ perovskite structures is quite critical both to the design and fabrication of high-performance perovskite devices and to fundamental studies of the photophysics of the excitons. In particular, it is known that, under ambient conditions, CH₃NH₃PbI₃ degrades producing some PbI₂. We show here that low temperature Photoluminescence (PL) spectroscopy is a powerful tool to detect PbI₂ traces in hybrid perovskite layers and single crystals.

Two-Dimensional Perovskite Activation with an Organic Luminophore.

A great advantage of the hybrid organic-inorganic perovskites is the chemical flexibility and the possibility of a molecular engineering of each part of the material (the inorganic part and the organic part respectively) in order to improve or add some functionalities. An adequately chosen organic luminophore has been introduced inside a lead bromide type organic-inorganic perovskite, while respecting the two-dimensional perovskite structure. A substantial increase of the brilliance of the perovskite is obtained.

Room-Temperature Optical Tunability and Inhomogeneous Broadening in 2D-Layered Organic-Inorganic Perovskite Pseudobinary Alloys.

We focus here our attention on a particular family of 2D-layered and 3D hybrid perovskite molecular crystals, the mixed perovskites (C6H5-C2H4-NH3)2PbZ4(1-x)Y4x and (CH3-NH3)PbZ3(1-x)Y3x, where Z and Y are halogen ions such as I, Br, and Cl. Studying experimentally the disorder-induced effects on the optical properties of the 2D mixed layered materials, we demonstrate that they can be considered as pseudobinary alloys, exactly like Ga1-xAlxAs, Cd1-xHgxTe inorganic semiconductors, or previously reported 3D mixed hybrid perovskite compounds. 2D-layered and 3D hybrid perovskites afford similar continuous optical tunability at room temperature.

Photostability of 2D Organic-Inorganic Hybrid Perovskites.

We analyze the behavior of a series of newly synthesized (R-NH₃)₂PbX₄ perovskites and, in particular, discuss the possible reasons which cause their degradation under UV illumination. Experimental results show that the degradation process depends a lot on their molecular components: not only the inorganic part, but also the chemical structure of the organic moieties play an important role in bleaching and photo-chemical reaction processes which tend to destroy perovskites luminescent framework. In addition, we find the spatial arrangement in crystal also influences the photostability course.

Chirality dependence of the absorption cross section of carbon nanotubes.

The variation of the optical absorption of carbon nanotubes with their geometry has been a long-standing question at the heart of both metrological and applicative issues, in particular because optical spectroscopy is one of the primary tools for the assessment of the chiral species abundance of samples. Here, we tackle the chirality dependence of the optical absorption with an original method involving ultraefficient energy transfer in porphyrin-nanotube compounds that allows uniform photoexcitation of all chiral species. We measure the absolute absorption cross section of a wide range of semiconducting nanotubes at their S22 transition and show that it varies by up to a factor of 2.

High-Q planar organic-inorganic Perovskite-based microcavity.

We report on the fabrication of a perovskite-based ((C6H5C2H4 - NH3)2 PbI4) planar microcavity with a technique of a top dielectric mirror's migration in liquid, avoiding the degradation of the perovskite material. This approach allows for increasing the cavity Q-factor, without degrading the fragile molecular material. Strong coupling of the perovskite exciton to both the cavity mode and the first Bragg mode is evidenced from angle-resolved reflectivity and microphotoluminescence measurements at room temperature; an efficient relaxation toward the minimum of the main polariton branch is observed.

Local field effects in the energy transfer between a chromophore and a carbon nanotube: a single-nanocompound investigation.

Energy transfer in noncovalently bound porphyrin/carbon nanotube compounds is investigated at the single-nanocompound scale. Excitation spectroscopy of the luminescence of the nanotube shows two resonances arising from intrinsic excitation of the nanotube and from energy transfer from the porphyrin. Polarization diagrams show that both resonances are highly anisotropic, with a preferred direction along the tube axis.

Pi-stacking functionalization of carbon nanotubes through micelle swelling.

We report on a new, original and efficient method for pi-stacking functionalization of single-wall carbon nanotubes. This method is applied to the synthesis of a high-yield light-harvesting system combining single-wall carbon nanotubes and porphyrin molecules. We developed a micelle-swelling technique that leads to controlled and stable complexes presenting an efficient energy transfer.