AlO Grain Boundary Segregation in a Thermal Barrier Coating on a Ni-Based Superalloy.

The segregation of reactive elements (REs) along thermally grown oxide (TGO) grain boundaries has been associated to slower oxide growth kinetics and improved creep properties. However, the incorporation and diffusion of these elements into the TGO during oxidation of Ni alloys remains an open question. In this work, electron backscatter diffraction in transmission mode (t-EBSD) was used to investigate the microstructure of TGO within the thermal barrier coating on a Ni-based superalloy, and atom probe tomography (APT) was used to quantify the segregation behavior of REs to α-Al2O3 grain boundaries.

Atom Probe Tomography Interlaboratory Study on Clustering Analysis in Experimental Data Using the Maximum Separation Distance Approach.

We summarize the findings from an interlaboratory study conducted between ten international research groups and investigate the use of the commonly used maximum separation distance and local concentration thresholding methods for solute clustering quantification. The study objectives are: to bring clarity to the range of applicability of the methods; identify existing and/or needed modifications; and interpretation of past published data. Participants collected experimental data from a proton-irradiated 304 stainless steel and analyzed Cu-rich and Ni-Si rich clusters.

Data on the early oxidation of SiO-coated pure Ti and bulk TiSi at 800 °C.

Oxidation of pure Ti sputtered with a 250 nm layer of amorphous SiO and bulk TiSi was conducted at 800 °C for 2 or 32 h in a 1 standard cubic centimeter per minute (SCCM) O/4 SCCM Ar environment (approximately pO = 0.2 atm/20.3 kPa).

STEM and APT characterization of scale formation on a La,Hf,Ti-doped NiCrAl model alloy.

A thermally grown scale formed on a cast NiCrAl model alloy doped with lanthanum, hafnium, and titanium was examined after isothermal exposure at 1100 °C for 100 h in dry flowing O to understand the dopant segregation along scale grain boundaries. The complex scale formed on the alloy surface was composed of two types of substrates: phase-dependent, thin (<250 nm) outer layers and a columnar-grained ∼3.5 μm inner alumina layer.

Defining clusters in APT reconstructions of ODS steels.

Oxide nanoclusters in a consolidated Fe-14Cr-2W-0.3Ti-0.3Y₂O₃ ODS steel and in the alloy powder after mechanical alloying (but before consolidation) are investigated by atom probe tomography (APT).

Hydrogen production from formic acid decomposition at room temperature using a Ag-Pd core-shell nanocatalyst.

Formic acid (HCOOH) has great potential as an in situ source of hydrogen for fuel cells, because it offers high energy density, is non-toxic and can be safely handled in aqueous solution. So far, there has been a lack of solid catalysts that are sufficiently active and/or selective for hydrogen production from formic acid at room temperature. Here, we report that Ag nanoparticles coated with a thin layer of Pd atoms can significantly enhance the production of H₂ from formic acid at ambient temperature.

Atom probe characterization of precipitation in an aged Cu-Ni-P alloy.

A temporal evolution of clusters associated with age hardening behavior in a Cu-Ni-P alloy during ageing at 250 °C for up to 100 ks after solution treatment has been carried out. A three-dimensional atom probe (3DAP) analysis has showed that Ni-P clusters are present in the as-quenched condition, and that the cluster density increases as the ageing time increases. The clusters have a wide range of Ni/P ratios when they are relatively small, whereas larger clusters exhibit a narrow distribution of the Ni/P ratio, approaching a ratio of approximately two.

Impact of laser pulsing on the reconstruction in an atom probe tomography.

The implementation of fast pulsed laser has significantly improved the performance of the atom probe technique by enabling near-atomic-scale three-dimensional analysis of poorly conducting materials. This has broadened the range of applications for the atom probe, addressing a major limitation of the technique. Despite this, the implications of lasing on the tomographic reconstruction of atom probe data have yet to be fully characterised.

Chromatic aberrations in the field evaporation behavior of small precipitates.

Artifacts in the field evaporation behavior of small precipitates have limited the accuracy of atom probe tomography analysis of clusters and precipitates smaller than 2 nm. Here, we report on specific observations of reconstruction artifacts that were obtained in case of precipitates with radii less than 10 nm in Al alloys, focusing particularly on a shift that appears in the relative positioning of matrix and precipitate atoms. We show that this chemically dependent behavior, referred to as "chromatic aberration," is due to the electrostatic field above the emitter and the variations in field evaporation of the elements constituting the precipitates.

Towards better 3-D reconstructions by combining electron tomography and atom-probe tomography.

Scanning transmission electron microscope tomography and atom-probe tomography are both three-dimensional techniques on the nanoscale. We demonstrate here the combination of the techniques by analyzing the very same volume of an Al-Ag alloy specimen. This comparison allows us to directly visualize the theoretically known artifacts of each technique experimentally, providing insight into the optimal parameters to use for reconstructions and assessing the quality of each reconstruction.

A reassessment of the metastable miscibility gap in Al-Ag alloys by atom probe tomography.

The evolution of Guinier-Preston zones in an Al-2.7 at.% Ag alloy was studied using atom probe tomography.