Iron metal-organic framework nanofiber membrane for the integration of electro-Fenton and effective continuous treatment of pharmaceuticals in water.

In this study, an iron metal-organic framework (Fe-MOF) was synthesized and immobilized by electrospinning technique with the objective of obtaining a membrane composed of nanofibers of this material (Fe-MOF nanofiber membrane). The characterization performed by XRD, TEM, SEM, EDS mapping and FTIR confirmed the correct synthesis of Fe-MOF as well as its correct retention in the elaborated membranes. The usefulness and effectiveness of the Fe-MOF nanofiber membrane as a catalyst for the electro-Fenton process was evaluated by performing sulfamethoxazole degradation tests.

One-pot synthesis of bimetallic Fe-Cu metal-organic frameworks composite for the elimination of organic pollutants via peroxymonosulphate activation.

A series of bimetallic of FeCu metal-organic frameworks (MOFs) have been synthesised using a solvothermal process by varying the ratio between the two metals. Further, the bimetallic MOF catalysts were characterised by X-ray powder diffraction, scanning electron microscopy, and infrared spectroscopy techniques. Their catalytic properties for activation of peroxymonosulphate (PMS) have been tested by the removal of a model dye, rhodamine B.

Heterogeneous electro-Fenton system using Fe-MOF as catalyst and electrocatalyst for degradation of pharmaceuticals.

In recent years, heterogeneous electro-Fenton processes have gained considerable attention as an alternative to homogeneous processes. In this context, the aim of this study is the use of a commercial iron metal-organic framework (Fe-MOF), Basolite® F-300, as a base material for the design of a heterogeneous electro-Fenton treatment system for the removal of antipyrine. Initially, the catalyst was applied as powder in aqueous solution and three key parameters of the electro-Fenton process (pH, Fe-MOF concentration and current density) were evaluated and optimized by a Central Composite Design Face Centred (CCD-FC) using antipyrine removal and energy consumption as response functions.

Continuous treatment of diethyl hexyl and dibutyl phthalates by fixed-bed reactor: Comparison of two esterase bionanocomposites.

The removal of Diethyl hexyl phthalate (DEHP) and Dibutyl phthalate (DBP) is of great importance due to their potential adverse effects on the environment and human health. In this study, two bionanocomposites prepared by immobilization of Bacillus subtilis esterase by crosslinking to halloysite and supported in chitosan and alginate beads were studied and proposed as a green approach. The esterase immobilization was confirmed by physical-chemical characterization.

Electro-reversible adsorption as a versatile tool for the removal of diclofenac from wastewater.

In this study, adsorption of a non-steroidal anti-inflammatory drug such as Diclofenac (DCF) on a commercial carbonaceous aerogel honeycomb monolith (NANOLIT®-NQ40) was ascertained. Based on, the overall design of an adsorption treatment should include a feasible regeneration process for the spent adsorbent. In this work, the adsorption/desorption process was ameliorated by coupling of electrochemical technology (anodic/cathodic polarisation).

Bridging the gap to hydrochar production and its application into frameworks of bioenergy, environmental and biocatalysis areas.

Hydrothermal carbonization (HTC) is a facile, low-cost and eco-friendly thermal conversion process that has recently gained attention with a growing number of publications (lower 50 in 2000 to over 1500 in 2020). Despite being a promising technology, problems such as operational barriers, complex reaction mechanisms and scaling have to be solved to make it a commercial technology. To bridge this current gap, this review elaborates on the chemistry of the conversion of lignocellulosic biomass.

Environmental application of monolithic carbonaceous aerogels for the removal of emerging pollutants.

In this study, the performance of three commercial available monolithic carbonaceous aerogels (NQ30A, NQ60A and NQ80A) for the removal of different emerging pollutants, detected in water sources, was evaluated. More specifically, the removal of two pharmaceuticals (antipyrine and sulfamethoxazole) and an anti-fungal agent (methyl paraben), widely used in cosmetics, was studied. The NQ60A demonstrated the best adsorption characteristics and effectively adsorbed over 50 mg/g of the antipyrine and around 30 mg/g sulfamethoxazole and methyl paraben.

Towards sustainable removal of methylthioninium chloride by using adsorption-electroradical regeneration.

The current need for effective regeneration processes to be used in valorization of spent adsorbent demands the research of novel alternative techniques such as application of Advances Oxidation Processes. In this sense, the recent application of electroradical (ER) processes turned out to be very promising in terms of the drugs degradation from different environments. Thus, in this study, harnessing of a low cost natural adsorbent, Tunisian bentonite (BE), was evaluated for the removal of a model drug such as methylthioninium chloride (MC), and then its regeneration by ER processes was demonstrated.

Electro-Fenton process for implementation of acid black liquor waste treatment.

In this work, an eco-friendly solution for the remediation of wastewater generated in the lignin recovery process from eco-industrial paper mill has been proposed in their way towards a more circular economy strategy. Thus, the application of the electro-Fenton process for the degradation of the non-recovered lignin and other organic compounds form a scarcely studied acid black liquor waste (ABLW) was successfully performed. This treatment was able to operate in a range of COD loads (0.

Current advances and trends in electro-Fenton process using heterogeneous catalysts - A review.

Over the last decades, advanced oxidation processes have often been used alone, or combined with other techniques, for remediation of ground and surface water pollutants. The application of heterogeneous catalysis to electrochemical advanced oxidation processes is especially useful due to its efficiency and environmental safety. Among those processes, electro-Fenton stands out as the one in which heterogeneous catalysis has been broadly applied.

Kaolinite adsorption-regeneration system for dyestuff treatment by Fenton based processes.

The regeneration and reuse of adsorbents is a subject of interest nowadays in order to reduce the pollution and the wastes generated in the adsorption wastewater treatment. In this work, the regeneration of the spent kaolinite by different advanced oxidation processes (Fenton, electro-Fenton and electrokinetic-Fenton) was evaluated. Initially, it was confirmed the ability of a low cost clayey material, kaolinite, for the adsorption of model dye such as Rhodamine B showing Freundlich isotherm fitting.

Challenges and recent advances in biochar as low-cost biosorbent: From batch assays to continuous-flow systems.

Over the past few years, the increasing amount of pollutants and their diversity demand to develop versatile low-cost adsorption systems. The use of biomass feedstock such as agricultural residues, wood chips, manure or municipal solid wastes as source to produce low-cost biosorbent, and the new advances in their synthesis have encouraged remarkable efforts towards the development of biochar "on demand" in which their characteristics can be improved. This new trend opens the potential of biochar application in the removal of pollutants from wastewater, however, its use in environmental management requires the development of full-scale biosorption in engineered systems.

Electrokinetic-Fenton technology for the remediation of hydrocarbons historically polluted sites.

The feasibility of the electrokinetic-Fenton technology coupled with surfactants in the treatment of real historically hydrocarbons polluted soils has been studied. The characterisation of these soils from Spain and Romania was performed and identified as diesel and diesel-motor oil spillages, respectively. Moreover, the ageing of the spillages produced by the soil contamination was estimated showing the historical pollution of the sites (around 11 and 20 years for Romanian and Spanish soils, respectively).

Enhanced selective metal adsorption on optimised agroforestry waste mixtures.

The aim of this work is to ascertain the potentials of different agroforestry wastes to be used as biosorbents in the removal of a mixture of heavy metals. Fern (FE), rice husk (RI) and oak leaves (OA) presented the best removal percentages for Cu(II) and Ni(II), Mn(II) and Zn(II) and Cr(VI), respectively. The performance of a mixture of these three biosorbents was evaluated, and an improvement of 10% in the overall removal was obtained (19.