Prevalence of dental caries, periodontal disease, malocclusion, and tooth wear in indigenous populations in Brazil: a systematic review and meta-analysis.

The aim of this review was to evaluate the prevalence of dental caries, periodontal disease, malocclusion, and tooth wear in indigenous in Brazil. A systematic review of observational studies was performed according to the PRISMA guidelines (CRD42020218704). The search strategy involved the electronic databases of Embase, LILACS, PubMed, Web of Science, Scopus, and the CAPES Theses and Dissertations for gray literature.

Association between the prevalence of pulp stones and calcified atherosclerotic plaques: a systematic review and meta-analysis.

Objective: To evaluate the association between the prevalence of pulp stones (PS) in permanent teeth and calcified atherosclerotic plaques (CAP).

Methods: An electronic search was performed in 10 databases to locate observational studies that investigated the association between PS in permanent teeth and CAP, published until March 2022. Two reviewers performed the search, selection and extraction of data from eligible studies.

Critical appraisal of confounding factors of observational studies on the association between dentofacial features and dental trauma in a Brazilian population.

Aims/objectives: Dental trauma is a highly prevalent dental emergency. Children and adolescents without inadequate lip coverage, increased overjet, and anterior open bite are associated with the occurrence of traumatic dental injuries. Observational studies do not allow the inference of causality, one of the reasons being: the potential confounding factors.

Shaping Ability of Reciprocating and Rotary Systems After Root Canal Retreatment: a CBCT Study.

The purpose of this in vitro study was to evaluate the shaping ability of reciprocating and continuous rotary systems after root canal retreatment. After preparation and root canal filling, mesial canals of 54 mandibular molars were distributed into 3 groups (n=18), according to the filling material removal and re-instrumentation protocols: WOG group - WaveOne Gold system; PTN group - ProTaper Next system; and PTU group - ProTaper Universal system. Cone-beam computed tomographic (CBCT) images acquisition of the mesial root canals was performed at different moments: (1) before instrumentation (unprepared root canals), (2) after preparation and filling, (3) after filling material removal and (4) re-instrumentation.

CONSORT Compliance in Randomized Clinical Trials of Regenerative Endodontic Treatments of Necrotic Immature Teeth: A Scoping Review.

Introduction: This study aimed to investigate methodological quality of clinical trials in regenerative endodontics and its compliance with the CONSORT statement.

Methods: An electronic search was performed in 8 electronic databases. Only clinical trials whose participants underwent regenerative endodontic treatment on necrotic permanent immature teeth were included.

Calcium Silicate-Based Sealers Do Not Reduce the Risk and Intensity of Postoperative Pain after Root Canal Treatment when Compared with Epoxy Resin-Based Sealers: A Systematic Review and Meta-Analysis.

This review aims to evaluate whether root canal obturation with calcium silicate-based (CSB) sealers reduces the risk and intensity of endodontic postoperative pain when compared to epoxy resin-based (ERB) sealers. The review was registered at PROSPERO (CRD42020169255). Two independent reviewers conducted an electronic search in PubMed, Scopus, EMBASE, Web of Science, Cochrane Library and LILACS until November 2020 and included only randomized clinical trials with adult health participants undergoing root canal treatment.

Effect of Occlusal Adjustment on Postoperative Pain after Root Canal Treatment: A Randomized Clinical Trial.

The aim of this prospective, randomized, clinical study was to analyze the influence of occlusal adjustment on the prevalence of postoperative pain after endodontic treatment. Seventy-eight patients, diagnosed with symptomatic irreversible pulpitis with indication for endodontic treatment, were selected to participate in the study. The participants were randomized and divided into two groups: in the occlusal adjustment group (OAG), endodontic treatment was performed with subsequent occlusal adjustment.

Apical Transportation and Centering Ability After Root Canal Filling Removal Using Reciprocating and Continuous Rotary Systems: A CBCT Study.

Objective: To evaluate the apical transportation and centering ability promoted by reciprocating and continuous rotary systems after root canal filling removal.

Materials And Methods: After obturation, 40 mesial root canals of mandibular molars were distributed into four groups ( = 20) for filling material removal: PTU group-F2 instrument (25.08) of ProTaper Universal system; R25 group-R25 instrument (25.

Comparison of the effect of photobiomodulation therapy and Ibuprofen on postoperative pain after endodontic treatment: randomized, controlled, clinical study.

The aim of the study was to compare the effect of Ibuprofen and the application of photobiomodulation therapy protocol on the reduction of postoperative pain in endodontically treated teeth using a randomized clinical trial design. Seventy patients, diagnosed with symptomatic irreversible pulpitis, were selected. Treatment was performed by a single operator; a reciprocal system was used to prepare the canals; they were obturated using the Tagger's hybrid technique and coronally sealed with glass-ionomer cement.

Effect of photobiomodulation therapy on postoperative pain after endodontic treatment: a randomized, controlled, clinical study.

Objective: The aim of this prospective, randomized, clinical study was to assess the effect of photobiomodulation therapy (PBM) with low-level laser irradiation (LLLI) on postoperative pain after endodontic treatment.

Materials And Methods: Sixty patients, diagnosed with irreversible pulpitis in lower molar teeth, participated in the study. All treatments were performed by a single operator.

Assessment of a Cavity to Optimize Ultrasonic Efficiency to Remove Intraradicular Posts.

Introduction: The study assessed an in vitro protocol for the removal of cast metal posts using ultrasonic vibration in multirooted teeth by drilling a cavity in the coronal portion of the post followed by ultrasound application in the cavity.

Method: Forty endodontically treated molars received intraradicular cast posts and were divided into 4 groups according to the removal protocol: the control group, no cavity and no ultrasonic vibration; the ultrasonic group, no cavity and ultrasonic vibration in the coronal portion of the core; the cavity group, a cavity in the core and no ultrasonic vibration; and the cavity ultrasonic group, a cavity in the core and ultrasonic vibration inside the cavity. The traction test was performed on all samples using a universal testing machine (EMIC DL-2000; EMIC Equipamentos e Sistemas de Ensaio LTDA, São José dos Pinhais, PR, Brazil) at a speed of 1 mm/min, obtaining values in Newtons.

Technological advances in endodontics: treatment of a mandibular molar with internal root resorption using a reciprocating single-file system.

The field of endodontics has become increasingly successful due to technological advances that allow clinicians to solve clinical cases that would have been problematic a few years ago. Despite such advances, endodontic treatment of teeth with internal root resorption remains challenging. This article presents a clinical case in which a reciprocating single-file system was used for endodontic treatment of a mandibular molar with internal root resorption.

Filling Material Removal with Reciprocating and Rotary Systems Associated with Passive Ultrasonic Irrigation.

Objective: The purpose of this ex vivo study was to evaluate the filling material removal ability, and the time required to perform this procedure, of reciprocating and conventional rotary systems when associated with passive ultrasonic irrigation.

Methods: The palatal roots of 40 maxillary molars were submitted to root canal preparation and filling. The desobturation of root canals was initially performed with Largo burs in the coronal portion (4 mm) to drill the gutta-percha and to facilitate the action of the instruments used then.

Apical transportation of manual NiTi instruments and a hybrid technique in severely curved simulated canals.

Aim: To evaluate the apical transportation induced by two instrumentation techniques in severely curved simulated canals.

Materials And Methods: Forty simulated canals were divided into two groups (n = 20), according to the following instrumentation techniques: ProTaper Universal Manual System and a hybrid technique. The simulated canals in the ProTaper group were prepared following the technique recommended by the manufacturer: SX files in the cervical third of the root canal and S1, S2, and F1 files up to the working length.

Apical Transportation, Centering Ability, and Cleaning Effectiveness of Reciprocating Single-file System Associated with Different Glide Path Techniques.

Introduction: The aim of this study was to evaluate the apical transportation, the centering ability, and the cleaning effectiveness of a reciprocating single-file system associated to different glide path techniques.

Methods: The mesial root canals of 52 mandibular molars were randomly distributed into 4 groups (n = 13) according to the different glide path techniques used before biomechanical preparation with Reciproc System (RS): KF/RS (sizes 10 and 15 K-files), NGP/RS (no glide path, only reciprocating system), PF/RS (sizes 13, 16, and 19 PathFile instruments), and NP (no preparation). Cone-beam computed tomography analysis was performed before and after instrumentation for apical third images acquisition.

Root canal retreatment using reciprocating and continuous rotary nickel-titanium instruments.

Objective: The complete filling material removal during endodontic retreatment is a clinical procedure difficult to achieve. The aim of this study was to evaluate the efficacy of reciprocating and continuous rotary nickel-titanium instruments used in root canal retreatment.

Materials And Methods: Forty freshly extracted human premolars were cleaned and shaped by the crown-down technique, followed by filling by the lateral compaction technique.

Surface characteristics of reciprocating instruments before and after use--a SEM analysis.

The presence of debris, defects and deformations of endodontic reciprocating instruments before and after chemical-mechanical preparation (MCP) was analyzed using scanning electron microscopy (SEM). The following 26 instruments were divided into 2 groups: Waveone (n=13) and Reciproc (n=13) and examined by SEM (150 x magnification) prior to canal preparation at 2 and 4 mm from the tip. The instruments were used in the preparation of mesial root canals of 26 extracted human permanent mandibular molars.

Evaluation of a new protocol for removing metal retainers from multirooted teeth.

Introduction: The aim of this study was to evaluate in vitro a new protocol for removing intraradicular retainers from multirooted teeth applying ultrasonic vibration.

Methods: Forty mandibular molars were endodontically treated to receive cast intraradicular retainers, which were distributed into the following 4 groups: group 1: control without a slot and without ultrasound, group 2: control with a slot and without ultrasound, group 3: ultrasonic vibration in the core without a slot, and group 4: ultrasonic vibration in the core with a slot. After the intraradicular retainers were cemented with zinc phosphate, ultrasonic vibration was applied for 1 minute.

Effect of ultrasonic tip designs on intraradicular post removal.

Objectives: To evaluate the effect of different ultrasonic tip designs on intraradicular post removal.

Materials And Methods: The crowns of forty human canine teeth were removed, and after biomechanical preparation and filling, the roots were embedded in acrylic resin blocks. The post spaces were made, and root canal molding was performed with self-cured acrylic resin.

Contamination of absorbent paper points in clinical practice: a critical approach.

This study sought to evaluate the contamination level of absorbent paper points used routinely in dental clinical practice. For this study, 60 absorbent paper points were collected and separated into 3 groups: 20 paper points from sealed commercial packages (Group 1), 20 paper points from open commercial packages in use for 30 days (Group 2), and 20 paper points from a sealed commercial package that were manipulated by the operator (Group 3). Evaluation criteria was the presence or absence of turbidity in the brain heart infusion (BHI) broth used as the culture medium.

Cleaning capacity of hybrid instrumentation technique using reamer with alternating cutting edges system files: Histological analysis.

Aim: The aim of the following study is to evaluate the cleaning capacity of a hybrid instrumentation technique using Reamer with Alternating Cutting Edges (RaCe) system files in the apical third of mesial roots of mandibular molars.

Materials And Methods: Twenty teeth were selected and separated into two groups (n = 20) according to instrumentation technique as follows: BioRaCe - chemomechanical preparation with K-type files #10 and #15; and files BioRaCe BR0, BR1, BR2, BR3, and BR4; HybTec - hybrid instrumentation technique with K-type files #10 and #15 in the working length, #20 at 2 mm, #25 at 3 mm, cervical preparation with Largo burs #1 and #2; apical preparation with K-type files #15, #20, and #25 and RaCe files #25.04 and #30.

Effect of passive ultrasonic agitation during final irrigation on cleaning capacity of hybrid instrumentation.

Objectives: To evaluate the effect of passive ultrasonic agitation on the cleaning capacity of a hybrid instrumentation technique.

Materials And Methods: Twenty mandibular incisors with mesiodistal-flattened root shape had their crowns sectioned at 1 mm from the cementoenamel junction. Instrumentation was initiated by catheterization with K-type files (Denstply Maillefer) #10, #15, and #20 at 3 mm from the working length.

Morphometrical analysis of cleaning capacity of a hybrid instrumentation in mesial flattened root canals.

The cleaning capacity of hybrid and rotary instrumentation techniques in mesial flattened canals of mandibular first molars was evaluated by morphometrical analysis in this study. Twenty human mandibular first molars were randomly assigned into two groups, according to instrumentation technique, as follows: group 1, instrumentation with ProTaper Starter Kit (Dentsply/Maillefer) rotary system; group 2, manual instrumentation using K files (Dentsply/Maillefer) by crown-down technique in middle and apical thirds, cervical preparation with Gates-Glidden #1 and #2 (Dentsply/Maillefer) burs, and to finalise the preparation, ProTaper F2 and F3 rotary files. Serial transverse cross-sections (5 µm) of the apical third, stained with hematoxylin and eosin, were analysed at 100× original magnification.