Fatigue Testing of Pipeline Welds and Heat-Affected Zones in Pressurized Hydrogen Gas.

Several welds and associated heat-affected zones (HAZs) on two API X70 and two API X52 pipes were tested to determine the fatigue crack growth rate (FCGR) in pressurized hydrogen gas and assess the area of the pipe that was most susceptible to fatigue when subjected to hydrogen gas. The relationship between FCGRs for welds and HAZs compared to base metal is discussed relative to local residual stresses, differences in the actual path of the crack, and hydrogen pressure effects.

Sensitivity Analysis of Fatigue Crack Growth Model for API Steels in Gaseous Hydrogen.

A model to predict fatigue crack growth of API pipeline steels in high pressure gaseous hydrogen has been developed and is presented elsewhere. The model currently has several parameters that must be calibrated for each pipeline steel of interest. This work provides a sensitivity analysis of the model parameters in order to provide (a) insight to the underlying mathematical and mechanistic aspects of the model, and (b) guidance for model calibration of other API steels.

Quantifying nonlinear anisotropic elastic material properties of biological tissue by use of membrane inflation.

Determination of material parameters for soft tissue frequently involves regression of material parameters for nonlinear, anisotropic constitutive models against experimental data from heterogeneous tests. Here, parameter estimation based on membrane inflation is considered. A four parameter nonlinear, anisotropic hyperelastic strain energy function was used to model the material, in which the parameters are cast in terms of key response features.

Stress and strain in rat pulmonary artery material during a biaxial bubble test.

A biaxial bubble test has been designed to ascertain the mechanical properties of rat pulmonary arteries. The analytical procedure used to estimate stress and strain from the resulting test data is presented along with some analytical results. The bubble test was performed by loading a flat piece of rat pulmonary artery into a test fixture beneath a circular opening; the material was subsequently pressurized from below, producing a "bubble" of deformed material.