Spatiotemporal variations of tropospheric ozone in Spain (2008-2019).

This study aims to support the development of Spain's Ozone Mitigation Plan by evaluating the present-day spatial variation (2015-2019) and trends (2008-2019) for seven ground-level ozone (O) metrics relevant for human/ecosystems exposure and regulatory purposes. Results indicate that the spatial variation of O depends on the part of the O distribution being analyzed. Metrics associated with moderate O concentrations depict an increasing O gradient between the northern and Mediterranean coasts due to climatic factors, while for metrics considering the upper end of the O distribution, this climatic gradient tends to attenuate in favor of hotspot regions pointing to relevant local/regional O formation.

Size-resolved chemical composition and toxicity of particles released from refit operations in shipyards.

Ship refit and repair operations in shipyards generate aerosol emissions with high potential for environmental impacts. Metal-bearing nano-, fine and coarse particles are incidentally formed and can be released to indoor and ambient air and the aquatic environment. This work aimed to further the understanding of these impacts by characterising particle size-resolved chemical composition (15 nm - 10 μm), organophosphate esters (OPEs) content (e.

Channeled PM, PM and PM Emission Factors Associated with the Ceramic Process and Abatement Technologies.

A sampling methodology and a mathematical data treatment were developed that enable to determine not only total suspended particulates (TSP) emitted at channeled sources but also the PM, PM, and PM mass fractions (w, w, and w) and emission factors (E.F.), using a seven-stage cascade impactor.

Unveiling the Toxicity of Fine and Nano-Sized Airborne Particles Generated from Industrial Thermal Spraying Processes in Human Alveolar Epithelial Cells.

High-energy industrial processes have been associated with particle release into workplace air that can adversely affect workers' health. The present study assessed the toxicity of incidental fine (PGFP) and nanoparticles (PGNP) emitted from atmospheric plasma (APS) and high-velocity oxy-fuel (HVOF) thermal spraying. Lactate dehydrogenase (LDH) release, 2-(4-nitrophenyl)-2H-5-tetrazolio]-1,3-benzene disulfonate (WST-1) metabolisation, intracellular reactive oxygen species (ROS) levels, cell cycle changes, histone H2AX phosphorylation (γ-H2AX) and DNA damage were evaluated in human alveolar epithelial cells at 24 h after exposure.

Toxicity of Industrially Relevant Engineered Nanoparticles in Human Alveolar Epithelial Cells: Air-Liquid Interface Submerged Cultures.

Diverse industries have already incorporated within their production processes engineered nanoparticles (ENP), increasing the potential risk of worker inhalation exposure. models have been widely used to investigate ENP toxicity. Air-liquid interface (ALI) cell cultures have been emerging as a valuable alternative to submerged cultures as they are more representative of the inhalation exposure to airborne nano-sized particles.

Evaluation of One- and Two-Box Models as Particle Exposure Prediction Tools at Industrial Scale.

One- and two-box models have been pointed out as useful tools for modelling indoor particle exposure. However, model performance still needs further testing if they are to be implemented as trustworthy tools for exposure assessment. The objective of this work is to evaluate the performance, applicability and reproducibility of one- and two-box models on real-world industrial scenarios.

Lessons from the COVID-19 air pollution decrease in Spain: Now what?

We offer an overview of the COVID-19 -driven air quality changes across 11 metropolises in Spain with the focus on lessons learned on how continuing abating pollution. Traffic flow decreased by up to 80% during the lockdown and remained relatively low during the full relaxation (June and July). After the lockdown a significant shift from public transport to private vehicles (+21% in Barcelona) persisted due to the pervasive fear that using public transport might increase the risk of SARS-CoV-2 infection, which need to be reverted as soon as possible.

Toxicity assessment of industrial engineered and airborne process-generated nanoparticles in a 3D human airway epithelial model.

The advanced ceramic technology has been pointed out as a potentially relevant case of occupational exposure to nanoparticles (NP). Not only when nanoscale powders are being used for production, but also in the high-temperature processing of ceramic materials there is also a high potential for NP release into the workplace environment. toxicity of engineered NP (ENP) [antimony tin oxide (SbO•SnO; ATO); zirconium oxide (ZrO)], as well as process-generated NP (PGNP), and fine particles (PGFP), was assessed in MucilAir™ cultures at air-liquid interface (ALI).

Nanoparticle exposure and hazard in the ceramic industry: an overview of potential sources, toxicity and health effects.

The ceramic industry is an industrial sector of great impact in the global economy that has been benefiting from advances in materials and processing technologies. Ceramic manufacturing has a strong potential for airborne particle formation and emission, namely of ultrafine particles (UFP) and nanoparticles (NP), meaning that workers of those industries are at risk of potential exposure to these particles. At present, little is known on the impact of engineered nanoparticles (ENP) on the environment and human health and no established Occupational Exposure Limits (OEL) or specific regulations to airborne nanoparticles (ANP) exposure exist raising concerns about the possible consequences of such exposure.

Environmental comparison of indoor floor coverings.

Appropriate selection of construction materials plays a major role in a building's sustainable profile. The study sets out a comparative life cycle assessment of indoor flooring systems of different nature. The flooring systems consisted of coverings and, where required, bonding material and/or impact soundproofing material.

Modeling of High Nanoparticle Exposure in an Indoor Industrial Scenario with a One-Box Model.

Mass balance models have proved to be effective tools for exposure prediction in occupational settings. However, they are still not extensively tested in real-world scenarios, or for particle number concentrations. An industrial scenario characterized by high emissions of unintentionally-generated nanoparticles (NP) was selected to assess the performance of a one-box model.

Workplace Exposure to Nanoparticles during Thermal Spraying of Ceramic Coatings.

Thermal spraying is widely used for industrial-scale application of ceramic coatings onto metallic surfaces. The particular process has implications for occupational health, as the high energy process generates high emissions of metal-bearing nanoparticles. Emissions and their impact on exposure were characterized during thermal spraying in a work environment, by monitoring size-resolved number and mass concentrations, lung-deposited surface area, particle morphology, and chemical composition.

On the Relationship between Exposure to Particles and Dustiness during Handling of Powders in Industrial Settings.

Exposure to ceramic powders, which is frequent during handling operations, is known to cause adverse health effects. Finding proxy parameters to quantify exposure is useful for efficient and timely exposure assessments. Worker exposure during handling of five materials [a silica sand (SI1), three quartzes (Q1, Q2, and Q3), and a kaolin (K1)] with different particle shape (prismatic and platy) and sizes (3.

Testing the performance of one and two box models as tools for risk assessment of particle exposure during packing of inorganic fertilizer.

Modelling of particle exposure is a useful tool for preliminary exposure assessment in workplaces with low and high exposure concentrations. However, actual exposure measurements are needed to assess models reliability. Worker exposure was monitored during packing of an inorganic granulate fertilizer at industrial scale using small and big bags.

Organosilane-Based Coating of Quartz Species from the Traditional Ceramics Industry: Evidence of Hazard Reduction Using In Vitro and In Vivo Tests.

The exposure to respirable crystalline silica (RCS), e.g. quartz, in industrial settings can induce silicosis and may cause tumours in chronic periods.

Evaluation of the Dustiness of Different Kaolin Samples.

Several samples of kaolin with different mean particle size were prepared and tested using the continuous drop method, one of the reference test methods according to standard EN 15051:2006 "Workplace atmospheres - Measurement of the dustiness of bulk materials - Requirements and reference test methods." On the other hand, with a view to relating the dustiness of the materials to their properties, particle size distribution, specific surface area, and Hausner ratio of these samples were determined. This article presents a characterization of these samples and an assessment of the influence of some material parameters on dustiness.

Variations in vanadium, nickel and lanthanoid element concentrations in urban air.

The emission of trace metal pollutants by industry and transport takes place on a scale large enough to alter atmospheric chemistry and results in measurable differences between the urban background of inhalable particulate matter (PM) in different towns. This is particularly well demonstrated by the technogenic release into the atmosphere of V, Ni, and lanthanoid elements. We compare PM concentrations of these metals in large datasets from five industrial towns in Spain variously influenced by emissions from refinery, power station, shipping, stainless steel, ceramic tiles and brick-making.

Application of optimally scaled target factor analysis for assessing source contribution of ambient PM10.

Speciated coarse particulate matter (PM10) data obtained at three air quality monitoring sites in a highly industrialized area in Spain between 2002 and 2007 were analyzed for assessing source contribution of ambient particulate matter (PM). The source apportionment of PM in this area is an especially difficult task. There are industrial mineral dust emissions that need to be separately quantified from the natural sources of mineral PM.

Effect of ceramic industrial particulate emission control on key components of ambient PM10.

The relationship between specific particulate emission control and ambient levels of some PM(10) components (Zn, As, Pb, Cs, Tl) was evaluated. To this end, the industrial area of Castellón (Eastern Spain) was selected, where around 40% of the EU glazed ceramic tiles and a high proportion of EU ceramic frits are produced. The PM(10) emissions from the ceramic processes were calculated over the period 2000-2006, taking into account the degree of implementation of corrective measures throughout the study period.

PM sources in a highly industrialised area in the process of implementing PM abatement technology. Quantification and evolution.

Principal component analysis (PCA) coupled with a multilinear regression analysis (MLRA) was applied to PM(10) speciation data series (2002-2005) from four sampling sites in a highly industrialised area (ceramic production) in the process of implementing emission abatement technology. Five common factors with similar chemical profiles were identified at all the sites: mineral, regional background (influenced by the industrial estate located on the coast: an oil refinery and a power plant), sea spray, industrial 1 (manufacture and use of glaze components, including frit fusion) and road traffic. The contribution of the regional background differs slightly from site to site.