Integrated 3D printed heaters for microfluidic applications: Ammonium analysis within environmental water.

A multi-material 3D printed microfluidic reactor with integrated heating is presented, which was applied within a manifold for the colorimetric determination of ammonium in natural waters. Graphene doped polymer was used to provide localised heating when connected to a power source, achieving temperatures of up to 120 °C at 12 V, 0.7 A.

Preconcentration by solvent removal: techniques and applications.

Preconcentration is the aspect of analytical method development covering the need to improve detection sensitivity. This review collects the advances in a diversity of approaches to achieve preconcentration by solvent removal. Evaporation in microfluidic and paper-based devices is reported in a variety of forms and later compared to membrane-assisted evaporation.

On-line solvent exchange system: Automation from extraction to analysis.

Removal of organic solvent from sample extracts is required before analysis by reversed phase HPLC to preserve chromatographic performance and allow for bigger injection volumes, boosting sensitivity. Herein, an automated on-line extraction evaporation procedure is integrated with HPLC analysis. The evaporation occurs inside a 200 μm microfluidic channel confined by a vapor permeable membrane.

Effect of vinylpyrrolidone polymers on the solubility and supersaturation of drugs; a study using the Cheqsol method.

The development of methods to increase the bioavailability of drugs is of great interest, especially for those which are poorly soluble or permeable. One of the strategies to enhance the solubility (which in turn has the potential of increase bioavailability) of drugs is the use of additives in the formulation process, so that the drug can stay supersaturated in biological fluids for a period of time long enough to allow absorption. The use of polymers as pharmaceutical excipients in order to stabilize the supersaturation of drugs is common practice.

Evaporative membrane modulation for comprehensive two-dimensional liquid chromatography.

An evaporative membrane modulator was developed, built and evaluated to avoid loss of performance in the second dimension when coupling two-dimensional liquid chromatography systems. The automated interface reduces the volume after D elution on-line by a pre-determined factor, regardless of the separation gradient. This volume reduction ensures that the injection volume in the D is appropriate for the second column, avoiding the detrimental effects of overloading.