Enhanced Delivery of Biomolecules into Caco2 Cells Based on the Cell-Penetrating Ability of Keratin Peptides.

Keratin, as a promising bioresource, possesses significant potential for diverse biological applications due to its favorable biocompatibility, low toxicity, biodegradability, and cell adhesion ability. However, there are few studies on the cell-penetrating ability of keratin peptides (KEPs) for biomolecule delivery. Therefore, this study explored the cell-penetrating ability of KEPs with different molecular weights (Mw) on Caco2 cells using fluorescein-labeled insulin (FITC-INS) as the target intracellular biomolecule.

Effect of ultrasound on keratin valorization from chicken feather waste: Process optimization and keratin characterization.

Chicken feather (CF) has been deemed as one of the main poultry byproducts with a large amount produced globally. However, the robust chemical nature of chicken feathers has been limiting in its wide-scale utilization and valorization. The study proposed a strategy of keratin regeneration from chicken feather combining ultrasound and Cysteine (Cys)-reduction for keratin regeneration.

Fourier Transform Infrared Spectroscopy for Assessing Structural and Enzymatic Reactivity Changes Induced during Feather Hydrolysis.

Chicken feathers are major byproducts of the livestock processing industry with high potential in the feed sector. In this study, we present a new approach using Fourier transform infrared (FTIR) spectroscopy to detect the structural changes of feather keratin and its availability for enzymatic hydrolysis (AEH) induced by the thermal pressure hydrolysis (TPH) process. Compared to time-consuming in vitro measurement techniques, the proposed method provides rapid information about the structural changes during TPH which enables quick adaptation of TPH conditions as the quality of the incoming feather changes.

A plant wide simulation of polyhydroxyalkanoate production from wastewater and its conversion to methyl crotonate.

This work simulates the production of methyl crotonate from various industrial wastewaters. In the upstream process, wastewater is fermented into volatile fatty acids which are then converted into polyhydroxyalkanoates (PHA) by means of mixed microbial cultures. In the downstream, PHA undergoes a series of thermolysis and esterification reactions to produce methyl crotonate.

A sustainable and efficient recycling strategy of feather waste into keratin peptides with antimicrobial activity.

The study aimed to propose an efficient and eco-friendly strategy to improve the utilization of feather waste and converting it into high-valued antimicrobial products. Under the synergistic effect of instant catapult steam explosion (ICSE) (1.5 MPa-120 s), over 90% of chicken feather powder (CFP) was degraded into soluble peptides via keratinolysis within 3 h, about 90% of which were smaller than 3 kDa, indicating an overwhelming advantage than general proteolysis.

Biocatalytic, one-pot diterminal oxidation and esterification of n-alkanes for production of α,ω-diol and α,ω-dicarboxylic acid esters.

Direct and selective terminal oxidation of medium-chain n-alkanes is a major challenge in chemistry. Efforts to achieve this have so far resulted in low specificity and overoxidized products. Biocatalytic oxidation of medium-chain n-alkanes - with for example the alkane monooxygenase AlkB from P.

The Future of Ethenolysis in Biobased Chemistry.

The desire to utilise biobased feedstocks and develop more sustainable chemistry poses new challenges in catalysis. A synthetically useful catalytic conversion is ethenolysis, a cross metathesis reaction with ethylene. In this Review, the state of the art of ethenolysis in biobased chemistry was extensively examined using methyl oleate as a model compound for fatty acids.

Mechanochemical Immobilisation of Metathesis Catalysts in a Metal-Organic Framework.

A simple, one-step mechanochemical procedure for immobilisation of homogeneous metathesis catalysts in metal-organic frameworks was developed. Grinding MIL-101-NH (Al) with a Hoveyda-Grubbs second-generation catalyst resulted in a heterogeneous catalyst that is active for metathesis and one of the most stable immobilised metathesis catalysts. During the mechanochemical immobilisation the MIL-101-NH (Al) structure was partially converted to MIL-53-NH (Al).

Simultaneous and selective decarboxylation of L-serine and deamination of L-phenylalanine in an amino acid mixture--a means of separating amino acids for synthesizing biobased chemicals.

Amino acids (AAs) obtained from the hydrolysis of biomass-derived proteins are interesting feedstocks for the chemical industry. They can be prepared from the byproduct of biofuel production and agricultural wastes. They are rich in functionalities needed in petrochemicals, providing the opportunity to save energy, reagents, and process steps.

Synthesis of bio-based methacrylic acid by decarboxylation of itaconic acid and citric acid catalyzed by solid transition-metal catalysts.

Methacrylic acid, an important monomer for the plastics industry, was obtained in high selectivity (up to 84%) by the decarboxylation of itaconic acid using heterogeneous catalysts based on Pd, Pt and Ru. The reaction takes place in water at 200-250 °C without any external added pressure, conditions significantly milder than those described previously for the same conversion with better yield and selectivity. A comprehensive study of the reaction parameters has been performed, and the isolation of methacrylic acid was achieved in 50% yield.

The selective conversion of glutamic acid in amino acid mixtures using glutamate decarboxylase--a means of separating amino acids for synthesizing biobased chemicals.

Amino acids (AAs) derived from hydrolysis of protein rest streams are interesting feedstocks for the chemical industry due to their functionality. However, separation of AAs is required before they can be used for further applications. Electrodialysis may be applied to separate AAs, but its efficiency is limited when separating AAs with similar isoelectric points.

Lipase-catalyzed aza-Michael reaction on acrylate derivatives.

A methodology has been developed for an efficient and selective lipase-catalyzed aza-Michael reaction of various amines (primary and secondary) with a series of acrylates and alkylacrylates. Reaction parameters were tuned, and under the optimal conditions it was found that Pseudomonas stutzeri lipase and Chromobacterium viscosum lipase showed the highest selectivity for the aza-Michael addition to substituted alkyl acrylates. For the first time also, some CLEAs were examined that showed a comparable or higher selectivity and yield than the free enzymes and other formulations.

Immobilised enzymes in biorenewables production.

Oils, fats, carbohydrates, lignin, and amino acids are all important raw materials for the production of biorenewables. These compounds already play an important role in everyday life in the form of wood, fabrics, starch, paper and rubber. Enzymatic reactions do, in principle, allow the transformation of these raw materials into biorenewables under mild and sustainable conditions.

Selective oxidative decarboxylation of amino acids to produce industrially relevant nitriles by vanadium chloroperoxidase.

Industrial nitriles from biomass: Vanadium-chloroperoxidase is successfully used to transform selectively glutamic acid into 3-cyanopropanoic acid, a key intermediate for the synthesis of bio-succinonitrile and bio-acrylonitrile, by using a catalytic amount of a halide salt. This clean oxidative decarboxylation can be applied to mixtures of amino acids obtained from plant waste streams, leading to easily separable nitriles.

Lignin depolymerisation in supercritical carbon dioxide/acetone/water fluid for the production of aromatic chemicals.

Valorisation of lignin plays a key role in further development of lignocellulosic biorefinery processes the production of biofuels and bio-based materials. In the present study, organosolv hardwood and wheat straw lignins were converted in a supercritical fluid consisting of carbon dioxide/acetone/water (300-370°C, 100bar) to a phenolic oil consisting of oligomeric fragments and monomeric aromatic compounds with a total yield of 10-12% based on lignin. These yields are similar to the state-of-the-art technologies such as base-catalysed thermal processes applied for lignin depolymerisation.

Synthesis of biobased succinonitrile from glutamic acid and glutamine.

Succinonitrile is the precursor of 1,4-diaminobutane, which is used for the industrial production of polyamides. This paper describes the synthesis of biobased succinonitrile from glutamic acid and glutamine, amino acids that are abundantly present in many plant proteins. Synthesis of the intermediate 3-cyanopropanoic amide was achieved from glutamic acid 5-methyl ester in an 86 mol% yield and from glutamine in a 56 mol % yield.

Optimization of the dilute maleic acid pretreatment of wheat straw.

Background: In this study, the dilute maleic acid pretreatment of wheat straw is optimized, using pretreatment time, temperature and maleic acid concentration as design variables. A central composite design was applied to the experimental set up. The response factors used in this study are: (1) glucose benefits from improved enzymatic digestibility of wheat straw solids; (2) xylose benefits from the solubilization of xylan to the liquid phase during the pretreatment; (3) maleic acid replenishment costs; (4) neutralization costs of pretreated material; (5) costs due to furfural production; and (6) heating costs of the input materials.

Assessment of technological options and economical feasibility for cyanophycin biopolymer and high-value amino acid production.

Major transitions can be expected within the next few decades aiming at the reduction of pollution and global warming and at energy saving measures. For these purposes, new sustainable biorefinery concepts will be needed that will replace the traditional mineral oil-based synthesis of specialty and bulk chemicals. An important group of these chemicals are those that comprise N-functionalities.

Biomass in the manufacture of industrial products--the use of proteins and amino acids.

The depletion in fossil feedstocks, increasing oil prices, and the ecological problems associated with CO2 emissions are forcing the development of alternative resources for energy, transport fuels, and chemicals: the replacement of fossil resources with CO2 neutral biomass. Allied with this, the conversion of crude oil products utilizes primary products (ethylene, etc.) and their conversion to either materials or (functional) chemicals with the aid of co-reagents such as ammonia and various process steps to introduce functionalities such as -NH2 into the simple structures of the primary products.

Bio-refinery as the bio-inspired process to bulk chemicals.

This paper describes several examples of knowledge-intensive technologies for the production of chemicals from biomass, which take advantage of the biomass structure in a more efficient way than the production of fuels or electricity alone. The depletion in fossil feedstocks, increasing oil prices, and the ecological problems associated with CO(2) emissions are forcing the development of alternative resources for energy, transport fuels, and chemicals, such as the replacement of fossil resources with CO(2) neutral biomass. Allied with this is the conversion of crude oil products utilizes primary products (ethylene, etc.