Study of the synergistic properties of copaiba oil co-electrospun with poly(L-co-D,L lactic acid) and natural rubber latex for application in bioactive wound dressings.

Wound healing is a complex process involving a sequence of factors that can be disrupted, negatively impacting the quality of life for patients and overburdening healthcare systems. Advanced dressings obtained by electrospinning are highlighted by the optimization of this process, allowing air exchange and protection against microorganisms. Aiming to develop bioactive dressings, this study investigated the physicochemical, mechanical, microbiological, and in vitro biological properties of membranes containing 25 %, 50 %, 75 %, and 90 % copaiba oil (CO) co-electrospun with poly(L-co-D,L-lactic acid) (PLDLA) and natural rubber latex (NR).

Meniscal repair with additive manufacture of bioresorbable polymer: From physicochemical characterization to implantation of 3D printed poly (L-co-D, L lactide-co-trimethylene carbonate) with autologous stem cells in rabbits.

Three-dimensional (3D) structures are actually the state-of-the-art technique to create porous scaffolds for tissue engineering. Since regeneration in cartilage tissue is limited due to intrinsic cellular properties this study aims to develop and characterize three-dimensional porous scaffolds of poly (L-co-D, L lactide-co-trimethylene carbonate), PLDLA-TMC, obtained by 3D fiber deposition technique. The PLDLA-TMC terpolymer scaffolds (70:30), were obtained and characterized by scanning electron microscopy, gel permeation chromatography, differential scanning calorimetry, thermal gravimetric analysis, compression mechanical testing and study on in vitro degradation, which showed its amorphous characteristics, cylindrical geometry, and interconnected pores.

Crosslinked Collagen-Hyaluronic Acid Scaffold Enhances Interleukin-10 Under Co-Culture of Macrophages And Adipose-Derived Stem Cells.

The skin, the human body's largest organ, possesses a protective barrier that renders it susceptible to various injuries, including burns. Following burn trauma, the inflammatory process triggers both innate and adaptive immune responses, leading to the polarization of macrophages into two distinct phenotypes: the pro-inflammatory M1 and the anti-inflammatory M2. This dual response sets the stage for wound healing and subsequent tissue regeneration.

The impact of non-deproteinization on physicochemical and biological properties of natural rubber latex for biomedical applications.

Latex is a colloidal suspension derived from the Hevea brasiliensis tree, derived from natural rubber, poly(isoprene), and assorted constituents including proteins and phospholipids. These constituents are inherent to both natural rubber and latex serum. This investigation was undertaken to examine the impact of the deproteinization process on chemical and biological dynamics of natural rubber latex.

Synthesis of epoxidized natural rubber grafted with hyaluronic acid for the development of biomaterials.

Natural Rubber (NR), extracted from Hevea brasiliensis rubber trees, is a biocompatible biopolymer with properties that support in the tissue repair process. However, its biomedical applications are limited due to the presence of allergenic proteins, hydrophobicity, and unsaturated bonds. To overcome these limitations and contribute to the development of new biomaterials, this study aims to deproteinize, epoxidize, and subject NR to copolymerization by grafting with hyaluronic acid (HA), which is widely recognized for its bioactive properties in the medical field.

Electrospun Membrane Based on Poly(L-co-D,L lactic acid) and Natural Rubber Containing Copaiba Oil Designed as a Dressing with Antimicrobial Properties.

Drug delivery systems of natural antimicrobial compounds, such as copaiba oil (CO), have become relevant in the scientific community due to the recent prevalence of the public health complications related to antibiotic resistance. Electrospun devices act as an efficient drug delivery system for these bioactive compounds, reducing systemic side effects and increasing the effectiveness of the treatment. In this way, the present study aimed to evaluate the synergistic and antimicrobial effect of the direct incorporation of different concentrations of CO in a poly(L-co-D,L lactic acid) and natural rubber (NR) electrospun membrane.

Poly (L-Lactic Acid) Cell-Laden Scaffolds Applied on Swine Model of Tracheal Fistula.

Introduction: Tracheal fistula (TF) treatments may involve temporary orthosis and further ablative procedures, which can lead to infection. Thus, TF requires other therapy alternatives development. The hypothesis of this work was to demonstrate the feasibility of a tissue-engineered alternative for small TF in a preclinical model.

Addition of Fibers to Calcium Phosphate Cement Increases Cell Viability and Stimulates Differentiation of Osteoblast-Like Cells.

Calcium phosphate cement (CPC) that is based on -tricalcium phosphate (-TCP) is considered desirable for bone tissue engineering because of its relatively rapid degradation properties. However, such cement is relatively weak, restricting its use to areas of low mechanical stress. fibers (WF) have been used to improve the mechanical strength of biomaterials.

Sciatic nerve repair using poly(ε-caprolactone) tubular prosthesis associated with nanoparticles of carbon and graphene.

Introduction: Injuries to peripheral nerves generate disconnection between spinal neurons and the target organ. Due to retraction of the nerve stumps, end-to-end neurorrhaphy is usually unfeasible. In such cases, autologous grafts are widely used, nonetheless with some disadvantages, such as mismatching of donor nerve dimensions and formation of painful neuromas at the donor area.

Bioresorbable scaffold as a dermal substitute.

Introduction: Bioresorbable polymers are often used in medical procedures. Since they are biocompatible, this class of materials is a viable alternative for cases in which tissue regeneration is strongly compromised. Bioresorbable synthetic polymers may be used as membranes to support and guide cell growth through the process of tissue repair.

evaluation of porous hydrogel pins to fill osteochondral defects in rabbits.

Objective: This experimental study aimed to evaluate the biological performance of poly (l-co-D, l-lactic acid)-co-trimetilene carbonate/poly (vinyl alcohol) (PLDLA-co TMC/PVA), hydrogel scaffolds, as an implant in the filling (and not in the repair) of osteochondral defects in New Zealand rabbits, assessing the influence of the material in tissue protection .

Methods: Twelve rabbits were divided into groups of nine and 16 weeks. In each animal, an osteochondral defect was created in both medial femoral condyles.

Histologic and Histometric Analysis of Bone Repair at the Site of Mandibular Body Osteotomy and at the Bone-Screw Interface After Using a Biodegradable 2.0-mm Internal Fixation System.

The aim of the study was to evaluate histologically and histometrically the bone repair at the mandibular body osteotomy and at the bone-screw interface after using a biodegradable 2.0-mm internal fixation system. Six dogs were subjected to an osteotomy in the mandibular body, which was stabilized by applying a fixation device manufactured with poly-L-DL-lactic acid (70:30).

Poly(lactic-co-glycolic acid) matrix incorporated with nisin as a novel antimicrobial biomaterial.

The use of poly(lactic-co-glycolic acid) (PLGA) matrix as a biomolecule carrier has been receiving great attention due to its potential therapeutic application. In this context, we investigated the PLGA matrix capacity to incorporate nisin, an antimicrobial peptide capable of inhibiting the growth of Gram-positive bacteria and bacterial spores germination. Nisin-incorporated PLGA matrices were evaluated based on the inhibitory effect against the nisin-bioindicator Lactobacillus sakei.

Synthesis, Characterization, and Osteoblastic Cell Culture of Poly(L-co-D,L-lactide-co-trimethylene carbonate) Scaffolds.

Lactide-based polymers have been widely investigated as materials for tissue engineering. However, characteristics such as low flexibility and elongation tend to limit particular applications, although these can be enhanced by adding plasticizers such as trimethylene carbonate (TMC) to the polymer chain of the copolymer poly(L-lactide-co-D,L-lactide) (PLDLA). The aim of this work was to synthesize and characterize a terpolymer of L-lactide, D,L-lactide, and TMC.

Treatment of peri-implantitis using nonsurgical debridement with bioresorbable nanospheres for controlled release of doxycycline: case report.

Peri-implantitis treatment is often surgical; however, in this case report, an alternative approach has been documented using a combination of nonsurgical debridement with the local controlled release of doxycycline by bioresorbable nanospheres in the peri-implant defect. After 15 months, remission on clinical inflammatory parameters of bleeding and suppuration on probing, as well as reduction of probing depths, was observed. This alternative approach may enhance clinical parameter improvements in some cases of peri-implantitis without the need for a surgical approach for implant decontamination.

PLDLA/PCL-T Scaffold for Meniscus Tissue Engineering.

The inability of the avascular region of the meniscus to regenerate has led to the use of tissue engineering to treat meniscal injuries. The aim of this study was to evaluate the ability of fibrochondrocytes preseeded on PLDLA/PCL-T [poly(L-co-D,L-lactic acid)/poly(caprolactone-triol)] scaffolds to stimulate regeneration of the whole meniscus. Porous PLDLA/PCL-T (90/10) scaffolds were obtained by solvent casting and particulate leaching.

The use of vancomycin-loaded poly-l-lactic acid and poly-ethylene oxide microspheres for bone repair: an in vivo study.

Objective: The aim of this study was to investigate bone repair after the implantation of vancomycin-loaded poly-L-lactic acid/poly-ethylene oxide microspheres compared with vancomycin-unloaded poly-L-lactic acid/poly-ethylene oxide microspheres.

Methods: Poly-L-lactic acid/poly-ethylene oxide microspheres were implanted in rat tibiae and evaluated for periods of 2, 4, 8, and 12 days and 4, 8, 16, and 32 weeks. The groups implanted with vancomycin-loaded and vancomycin-unloaded microspheres were compared.

BIORESORBABLE POLYMERIC MENISCAL PROSTHESIS: STUDY IN RABBITS.

Objective: To induce growth of a neomeniscus into the pores of a prosthesis in order to protect the knee joint cartilage.

Methods: 70 knees of 35 New Zealand rabbits were operated. The rabbits were five to seven months old, weighed 2 to 3.

Bioreabsorbable polymer scaffold as temporary meniscal prosthesis.

Menisci have an important role in load bearing, shock absorption, knee joint stability, and joint lubrication. Meniscal lesions and meniscectomy are followed by osteoarthritis in a high percentage of patients. At present, there is no ideal prosthesis for meniscal substitution.