Engineering Refractive Index Contrast in Thin Film Barium Titanate-on-Insulator.

Barium titanate-on-insulator has demonstrated excellent vertical optical confinement, low loss, and strong electro-optic properties. To fabricate a waveguide-based device, a region of higher refractive index must be created to confine a propagating mode, one way of which is through dry etching to form a ridge. However, despite recent progress achieved in etching barium titanate and similar materials, the sidewall and surface roughness resulting from the physical etching typically used limit the achievable ridge depth.

Analyzing the Mechanism of Zinc Oxide Nanowires Bending and Bundling Induced by Electron Beam under Scanning Electron Microscope Using Numerical and Simulation Analysis.

The bending effect of self-catalyst zinc oxide nanowires on a photoconducting behavior has been investigated by in-situ scanning electron microscope method and interpreted by analytical modeling. Zinc oxide NWs tend to incline due to geometric instability and because of the piezoelectric properties, which was confirmed by scanning electron microscope images. A cantilever bending model adequately describes the bending and bundling events, which are linked to the electrostatic interaction between nanowires.

Ultra-sensitive and fast optical detection of the spike protein of the SARS-CoV-2 using AgNPs/SiNWs nanohybrid based sensors.

Severe acute respiratory syndrome SARS-CoV-2 virus led to notable challenges amongst researchers in view of development of new and fast detecting techniques. In this regard, surface-enhanced Raman spectroscopy (SERS) technique, providing a fingerprint characteristic for each material, would be an interesting approach. The current study encompasses the fabrication of a SERS sensor to study the SARS-CoV-2 S1 (RBD) spike protein of the SARS-CoV-2 virus family.

A Barium Titanate-on-Oxide Insulator Optoelectronics Platform.

Electro-optic modulators are among the most important building blocks in optical communication networks. Lithium niobate, for example, has traditionally been widely used to fabricate high-speed optical modulators due to its large Pockels effect. Another material, barium titanate, nominally has a 50 times stronger r-parameter and would ordinarily be a more attractive material choice for such modulators or other applications.

Toward the Growth of Self-Catalyzed ZnO Nanowires Perpendicular to the Surface of Silicon and Glass Substrates, by Pulsed Laser Deposition.

Vertically-oriented zinc oxide (ZnO) nanowires were synthesized on glass and silicon substrates by Pulsed Laser Deposition and without the use of a catalyst. An intermediate c-axis oriented nanotextured ZnO seed layer in the form of nanowall network with honey comb structure allows the growth of high quality, self-forming, and vertically-oriented nanowires at relatively low temperature (<400 °C) and under argon atmosphere at high pressure (>5 Torr). Many parameters were shown to affect the growth of the ZnO nanowires such as gas pressure, substrate-target distance, and laser energy.

Ultra-low loss ridge waveguides on lithium niobate via argon ion milling and gas clustered ion beam smoothening.

Lithium niobate's use in integrated optics is somewhat hampered by the lack of a capability to create low loss waveguides with strong lateral index confinement. Thin film single crystal lithium niobate is a promising platform for future applications in integrated optics due to the availability of a strong electro-optic effect in this material coupled with the possibility of strong vertical index confinement. However, sidewalls of etched waveguides are typically rough in most etching procedures, exacerbating propagation losses.

Guided-wave electro-optic characterization of BaTiO3 thin films using the prism coupling technique.

Ferroelectric BaTiO3 (BTO) thin films are grown by RF sputtering onto an indium tin oxide bottom electrode on a MgO single-crystal substrate. We have studied here the optical properties by the prism coupling technique. We report the ordinary and extraordinary refractive indices of the films, the film thickness, and the optical losses that are obtained on the planar waveguides: n0=2.

Gallium-nitride-based plasmonic multilayer operating at 1.55 μm.

In this Letter, we have designed and fabricated a III-V semiconductor multilayer based on surface plasmon resonance (SPR) operating at the telecom wavelength. Optimization of the optogeometrical parameters and the metal/semiconductor layers required for this novel structure was conducted accurately by theoretical tools using the Maxwell equations. Technological fabrication of the device and its experimental characterizations using an evanescent coupling configuration was performed: the results have confirmed the existence of SPR associated to a sharp width response.

Effect of varying pore size of AAO films on refractive index and birefringence measured by prism coupling technique.

Anodic aluminum oxide (AAO) films with different pore sizes were prepared to modulate the effective refractive index and birefringence. To investigate the relationship between the refractive index and the pore size of the AAO film, optical constants were obtained using a prism coupler with various lasers. With experimental results, the dispersion curve of alumina itself without pores was extracted using a theoretical anisotropic model.

Analysis of frequency response of IDT/ZnO/Si SAW filter using the coupling of modes model.

A monolithic integration of filters on Si or GaAs substrates is highly desirable to miniaturize the outer dimensions of the cellular phones. But, direct monolithic integration of surface acoustic wave (SAW) filters is impossible with Si, which is nonpiezoelectric, and difficult with GaAs, which is weakly piezoelectric. One alternative is the deposition of a piezoelectric film on the semiconductor substrate.