Nanoscale mesh acts as anti-adhesive surface against particulate contamination in eyes of whiteflies.

In many insects the surface of the eye is nanostructured by arrays of protuberances termed ommatidial gratings which provide the cuticle with anti-reflective, anti-wetting and self-cleaning properties. The hypothesised anti-contamination role of the gratings against dust and pollen results from theoretical predictions on grating geometry and experiments on synthetic replicas of ommatidia surfaces but has not yet been proven in an animal. Whiteflies are biological test beds for anti-contamination surfaces because they deliberately distribute wax particles extruded from abdominal plates over their entire bodies.

Comparative study on mechanical properties and biomineralization of hooks in the diaspores of three epizoochorous plant species.

Most of the plants using epizoochory show adaptations to this diaspore dispersal strategy by having the diaspores covered by barbs, hooks, spines or viscid outgrowths, which allow diaspores to easily attach to an animal surface. Many previous studies have been mainly focused on the dispersal distances and efficiency, or effectiveness of diverse attachment structures depending on their size, anatomy, and morphology. However, the knowledge about the mechanical properties of these structures remains rather poor.

The Greasy Pole Syndrome in (Brassicaceae): The Pubescence and Wax Coverage on Stems Reduce Invasion by Ants.

To reduce negative effects of floral visitation by ants, which do not serve as reliable cross-pollinators, some plants have developed a non-floral, stem-based defense mechanism called greasy pole syndrome. In the present study, we examined the effects of two surface features (trichomes and three-dimensional epicuticular wax coverage) on stems of plants on visiting frequencies, travelled distances, and running velocities of ants. The experiments were performed with stem samples prepared from different (apical and basal) stem portions showing different surface morphologies (smooth control, covered by wax and trichomes + wax, respectively).

Wax Protrusions on Anti-Adhesive Plant Surfaces and Their Interactions with Insect Adhesive Pads: A Mechanical Interpretation.

Insect attachment devices enhance adhesion to complex-geometry substrates by increasing the real contact area. In nature, insects mainly interact with plant surfaces that are often covered by 3D wax structures. Here, we describe, discuss, and give a mechanical interpretation of plant waxes and the possible fracture mechanisms of these wax structures during their interactions with the adhesive pads of insects.

Parasitoid attachment ability and the host surface wettability.

Climbing animals such as geckos and arthropods developed astonishing adhesive mechanisms which are fundamental for their survival and represent valuable models for biomimetic purposes. A firm adhesion to the host surface, in order to successfully lay eggs is necessary for the reproduction of most parasitoid insects. In the present study, we performed a comparative investigation on the attachment ability of four parasitoid species (the egg parasitoid Anastatus bifasciatus (Eupelmidae), the aphid parasitoid Aphidius ervi (Braconidae), the fly pupal ectoparasitoid Muscidifurax raptorellus (Pteromalidae) and the pupal parasitoid of Drosophila Trichopria drosophilae (Diapriidae)) with hosts characterized by a surface having different wettability properties.

Insect attachment on waxy plant surfaces: the effect of pad contamination by different waxes.

This study focuses on experimental testing of the contamination hypothesis and examines how the contamination of insect adhesive pads with three-dimensional epicuticular waxes of different plant species contributes to the reduction of insect attachment. We measured traction forces of tethered male beetles having hairy adhesive pads on nine wax-bearing plant surfaces differing in both shape and dimensions of the wax structures and examined insect adhesive organs after they have contacted waxy substrates. For comparison, we performed the experiments with the same beetle individuals on a clean glass sample just before (gl1) and immediately after (gl2) the test on a plant surface.

Mechanoecology: biomechanical aspects of insect-plant interactions.

Plants and herbivorous insects as well as their natural enemies, such as predatory and parasitoid insects, are united by intricate relationships. During the long period of co-evolution with insects, plants developed a wide diversity of features to defence against herbivores and to attract pollinators and herbivores' natural enemies. The chemical basis of insect-plant interactions is established and many examples are studied, where feeding and oviposition site selection of phytophagous insects are dependent on the plant's secondary chemistry.

The tight attachment achieved by the male discoidal setae is possibly a counter-adaptation to the grease layer on female integument surfaces in green dock beetles.

Green dock beetles exhibit sexual dimorphism in tarsal attachment setae: females have only pointed, lanceolate and spatula-like setae, while males additionally possess discoidal ones. The sexual dimorphism is probably attributed to the necessity of male discoidal setae to adhere to the smooth back of the female during copulation. We aimed to understand its possible mechanism of attachment with .

Petals Reduce Attachment of Insect Pollinators: A Case Study of the Plant and the Fly .

In order to understand whether the petal surface in "cafeteria"-type flowers, which offer their nectar and pollen to insect pollinators in an open way, is adapted to a stronger attachment of insect pollinators, we selected the plant and the hovering fly , both being generalist species according to their pollinator's spectrum and diet, respectively. We combined cryo scanning electron microscopy examination of leaves, petals, and flower stems with force measurements of fly attachment to surfaces of these plant organs. Our results clearly distinguished two groups among tested surfaces: (1) the smooth leaf and reference smooth glass ensured a rather high attachment force of the fly; (2) the flower stem and petal significantly reduced it.

Effect of Leaf Trichomes in Different Species of Cucurbitaceae on Attachment Ability of the Melon Ladybird Beetle .

This study investigates the attachment ability of the oligophagous melon ladybird beetle to leaves of several Cucurbitaceae species. Using cryo-SEM, we described adult and larva tarsal attachment devices and leaf surface structures (glandular and non-glandular trichomes) in , , , , , and . Using traction force experiments and centrifugal force tests, we measured the friction force exerted by females and larvae on plant leaves.

Hierachical epicuticular wax coverage on leaves of as a possible adaptation to severe environmental conditions.

Using cryo scanning electron microscopy, the surface micromorphology of vegetative (leaf blade and ligule) and generative (pedicel and outer glume) organs in , one of the only two flowering plants native to Antarctica, was examined. Whereas the pedicel and outer glume were wax-free, both leaf sides had a prominent epicuticular wax coverage consisting of two superimposed layers: polygonal rodlets formed by fused irregular platelets (the lower wax layer) and membraneous platelets (the upper wax layer). Although the adaxial (inner) and abaxial (outer) leaf surfaces showed a similar microstructure of the wax coverage, they differed in the thickness ratio between lower and upper wax layer.

Coleoptera claws and trichome interlocking.

The present study tests the hypothesis that the specialized claws with a basal tooth found in some coccinellid beetles represent an adaptation to interlock with flexible unbranched trichomes of different plants. We compared the attachment ability of three Coleoptera species, Chnootriba elaterii, Harmonia axyridis (both Coleoptera: Coccinellidae), and Chrysolina herbacea (Coleoptera: Chrysomelidae) with claws of different shape. The attachment ability of insect individuals with or without claws to a plant with leaves bearing straight non-branched trichomes (Cucurbita moschata) and to a plant with smooth leaves (Prunus laurocerasus) was measured in traction force experiments.

Anti-icing strategies of plant surfaces: the ice formation on leaves visualized by Cryo-SEM experiments.

This paper presents an experimental study on surface icing on leaves in six plant species having different surface micromorphology and wettability properties. Contrary to previous studies on ice crystallization, which have been mainly performed by using infrared video thermography, we applied a Cryo-SEM approach allowing not only characterization of plant surfaces in their native conditions but also visualization of ice crystal formation on the native plant surfaces at the micro- and nanoscales. The Cryo-SEM was also used as an experimental device to freeze water vapor, thaw ice crystals, and freeze fluid water on the plant surface again.

Combined Effect of Different Flower Stem Features on the Visiting Frequency of the Generalist Ant An Experimental Study.

In order to understand the effects of the morphology and surface texture of flower stems in on the visiting frequency of generalist ants, we conducted experiments with ants running on dry wooden sticks mimicking different types of stems: (1) intact (grooved) sticks; (2) sticks painted with slaked (hydrated) lime (calcium carbonate coverage) imitating plant epicuticular wax coverage; (3) intact sticks with smooth polyester plate-shaped cuffs imitating upper leaves; and (4) intact sticks bearing cuffs painted with slaked lime. Ants were attracted by the sweet sugar syrup droplets placed on a stick tip, and the number of ants visiting the drops was counted. Our data showed significant differences in the visiting frequencies between the different types of stem-mimicking samples.

Surface chemistry of the ladybird beetle adhesive foot fluid across various substrates.

Nature has coevolved highly adaptive and reliable bioadhesives across a multitude of animal species. Much attention has been paid in recent years to selectively mimic these adhesives for the improvement of a variety of technologies. However, very few of the chemical mechanisms that drive these natural adhesives are well understood.

Variation of attachment ability of Nezara viridula (Hemiptera: Pentatomidae) during nymphal development and adult aging.

The present investigation reports data on the attachment ability of the Southern green stink bug Nezara viridula (Hemiptera: Pentatomidae), a relevant pest in the world, along its whole life cycle. Using a centrifugal force tester, we evaluated a) the differences in the attachment ability among the four active nymphal developmental instars (N2-N5 nymphs) and adult to hydrophilic glass, showing an increased attachment ability during ontogenesis, owing to increased pulvilli size and efficiency; b) the possible role of growth and body shape on insect attachment ability on hydrophilic glass during the intermoult period, revealing that N. viridula nymphs attach stronger (higher safety factor) in the first part of the intermoult period; c) the age-specific differences in the attachment ability of adults of both sexes on hydrophilic glass, showing the best performance at an intermediate age, in agreement with a higher proportion of resilin in comparison with younger or older insects; d) the difference in attachment ability on hydrophilic vs.

Traction force measurements on male Strepsiptera (Insecta) revealed higher forces on smooth compared with hairy substrates.

The aim of this study was to find out how strongly the parasitic insect , which has tarsi equipped with tenent hairs and lacking claws, attaches to different substrates. We investigated adhesion of male to the abdomen of its hymenopteran host (), the hairier abdomen of a sp. and two artificial smooth reference surfaces with different degrees of hydrophilicity.

Insect-inspired architecture to build sustainable cities.

Materials, structures, surfaces and buildings of insects are of a great scientific interest, but such basic knowledge about the functional principles of these structures is also highly relevant for technical applications, especially in architecture. Some of the greatest challenges for today's architecture are multifunctionality, energy saving and sustainability - problems that insects have partially solved during their evolution. Entomologists have collected a huge amount of information about the structure and function of such living constructions and surfaces.

Role of Fruit Epicuticular Waxes in Preventing (Diptera: Tephritidae) Attachment in Different Cultivars of .

The olive fruit fly (Diptera: Tephritidae) is the major pest of cultivated olives ( L.), and a serious threat in all of the Mediterranean Region. In the present investigation, we demonstrated with traction force experiments that female adhesion is reduced by epicuticular waxes (EWs) fruit surface, and that the olive fruit fly shows a different ability to attach to the ripe olive surface of different cultivars of (Arbequina, Carolea, Dolce Agogia, Frantoio, Kalamata, Leccino, Manzanilla, Picholine, Nostrale di Rigali, Pendolino and San Felice) in terms of friction force and adhesion, in relation with different mean values of olive surface wettability.

Mechanical ecology of fruit-insect interaction in the adult Mediterranean fruit fly Ceratitis capitata (Diptera: Tephritidae).

Fruit features represent a trade-off between dispersal and protection against frugivore insects. To prevent insect attack, plants evolved chemical and physical barriers, mainly studied in leaves, while limited knowledge is available for fruits, especially concerning mechanical barriers. We used the Mediterranean fruit fly to shed light on the mechanical ecology of insect-fruit attachment in a pest species.

Attachment ability of females and males of the ladybird beetle Cryptolaemus montrouzieri to different artificial surfaces.

To test the effects of surface chemistry and surface roughness on the attachment ability of female and male Cryptolaemus montrouzieri beetles that are equipped with hairy adhesive pads, traction force experiments were performed on three artificial substrates: (1) hydrophobic smooth glass, (2) hydrophobic smooth epoxy resin, and (3) hydrophobic microrough epoxy resin. Also the micromorphology of the dorsal body side and adhesive pads in males and females was examined using a scanning electron microscopy. The traction force ranged from 0.

Egg-laying job makes males hot: body temperature measurements in egg-laying tandems of the dragonfly Sympetrum vulgatum using IR camera.

Tandem oviposition, where males guide females in contact, requires quite a substantial muscle activity from males and, therefore, stronger heat production within the male thorax compared to the female thorax. In the present study, an infrared camera equipped with a macrolens was applied in the field, in order to estimate temperature in different body regions of male and female dragonflies Sympetrum vulgatum laying eggs in tandems. In both sexes, the thorax was considerably warmer than other body parts.

Porous substrate affects a subsequent attachment ability of the beetle Harmonia axyridis (Coleoptera, Coccinellidae).

According to literature data, porous substrates can cause a reduction of insect attachment ability. We carried out traction experiments with adult ladybird beetles Harmonia axyridis on the smooth solid glass sample and rough porous AlO membrane to prove the primary effect of absorption of the insect pad secretion by porous media, rather than surface roughness, on the attachment force on the porous sample. With each insect individual, a set of five experiments was conducted: (1) on glass; (2) on the porous membrane; (3-5) on glass immediately after the test on the porous surface, then after 30 min and 1 h of recovery time.

Attachment ability of the polyphagous bug Nezara viridula (Heteroptera: Pentatomidae) to different host plant surfaces.

The present investigation tests through friction experiments the attachment ability of adults of the southern green stink bug Nezara viridula L. (Heteroptera: Pentatomidae), a polyphagous insect representing a cosmopolitan pest, on different host plant species characterized by smooth, hairy and waxy surfaces. Surfaces of different tested plants have been studied in Cryo-Scanning Electron Microscope (Cryo-SEM).

Investigating the efficiency of a bio-inspired insect repellent surface structure.

Most insects with smooth or hairy adhesive pads have very little problems in attaching to smooth substrates. A careful selection of surface roughness, however, can effectively limit the contact area of the adhesive organs with the surface. In comparison to conventional toxin-based insect repelling methods, biologically inspired micro- and nanostructured insect repellent surface structures, thus, offer a great potential to effective and environmentally-friendly control insect pests.