Evidence of oxidative stress in the soft coral Pinnigorgia flava (Nutting, 1910) exposed to secondary plastic nanofibers and related leachates.

Awareness of plastic pollution in marine habitats, such as coral reefs, has grown in recent years. Several studies have shown that tiny particles resulting from plastic breakdown, especially microplastics, can potentially harm corals. However, to date, there is very little evidence regarding the impact that nanoplastics (<1 μm) can have on the physiology and health of corals, particularly soft corals.

Use of carbon-encapsulated zero-valent iron nanoparticles from waste biomass to hydrogen sulphide wet removal.

This study evaluates the use of carbon-encapsulated zero-valent iron nanoparticles for biogas upgrading in wet systems. The nanoparticles were produced by hydrothermal carbonization, using olive mill waste (OMW) or microalgae as carbon sources. The solids were characterized to investigate the specific surface area, total and zero-valent iron content, pH and chemical and crystalline composition.

Microalgal-based carbon encapsulated iron nanoparticles for the removal of pharmaceutical compounds from wastewater.

This study evaluates the effectiveness of microalgal-based carbon-encapsulated iron nanoparticles (ME-nFe) in the removal of pharmaceutical compounds (PhACs) from water solutions and real municipal effluent at a laboratory scale. The investigated PhACs were chosen to represent different classes of synthetic drugs: antibiotics, anti-inflammatory drugs, antihypertensives, antiepileptics, neuroprotectors, and antidepressants. The adsorbent material was produced through hydrothermal carbonization (225 °C for 3 h), using microalgae grown on wastewater as the carbon source.

Application of non-lethal bioSPME-LC-MS/MS for the detection of human pharmaceuticals in soft corals: A survey at the North Nilandhe atoll (Maldives).

At present the information regarding the occurrence of human pharmaceuticals (PhaCs) in coral reefs and their potential impacts on the associated fauna is limited. To optimize the collection of data in these delicate environments, we employed a solid-phase microextraction (bioSPME) and liquid chromatography coupled to tandem mass spectrometry (LC-MS/MS) procedure that enabled in vivo determinations in soft corals. Specifically, we researched the antibiotics Ofloxacin Sulfamethoxazole and Clarithromycin, the anti-inflammatory Diclofenac Propyphenazone Ketoprofen and Amisulpride, the neuroactive compounds Gabapentin-lactam, the beta-blocker Metoprolol and the antiepileptic Carbamazepine.

Mini-review: Nanoparticles for enhanced biogas upgrading.

This mini-review is intended to explore the innovative applications of nanoparticles (NPs) in biogas upgrading, emphasizing their capacity to enhance biogas quality. Numerous studies underscore how NPs, when applied during anaerobic digestion, can boost not only the quantity but also the quality of the produced biogas, leading to reduce significantly the concentration of hydrogen sulphide or even to remove it completely. Moreover, NPs are proving to be excellent alternatives as adsorbent materials, achieving up to 400 mg g NPs.

Analysis of Petrogenic Hydrocarbons in Plant Tissues: A Simple GC-MS-Based Protocol to Distinguish Biogenic Hydrocarbons from Diesel-Derived Compounds.

Diesel contamination of farming soils is of great concern because hydrocarbons are toxic to all forms of life and can potentially enter the food web through crops or plants used for remediation. Data on plant ability to uptake, translocate and accumulate diesel-derived compounds are controversial not only due to the probable diverse attitude of plant species but also because of the lack of a reliable method with which to distinguish petrogenic from biogenic compounds in plant tissues. The purpose of this study was to set up a GC-MS-based protocol enabling the determination of diesel-derived hydrocarbons in plants grown in contaminated soil for assessing human and ecological risks, predicting phytoremediation effectiveness and biomass disposal.

Removal of pharmaceutical compounds from the liquid phase of anaerobic sludge in a pilot-scale high-rate algae-bacteria pond.

This study evaluates the effectiveness of a pilot-scale high-rate algae-bacteria pond (HRAP) to remove pharmaceutical compounds (PhACs) from municipal centrate. The studied PhACs belonged to different classes of synthetic active compounds: antihypertensives, antiepileptics, antidepressants, neuroprotectors, and anti-inflammatory drugs. The HRAP, growing a mixed microalgal consortium made of Chlorella spp.

Plastitar in the Mediterranean Sea: New records and the first geochemical characterization of these novel formations.

A new geological formation consisting of plastic debris admixed to petroleum oil residue, termed "plastitar", has been recently described in the Canary Islands. Here, we report its widespread occurrence across the Mediterranean coast and new insights into its biogeochemical composition. Specifically, we found marked differences in the diagenetic stable indicator profiles, suggesting a heterogeneous seeps provenance.

Production of microalgal-based carbon encapsulated iron nanoparticles (ME-nFe) to remove heavy metals in wastewater.

The integration of microalgae-bacteria consortia within existing wastewater treatment plants as alternative biological treatment could be an interesting option to improve the sustainability of these facilities. However, the fate of the produced biomass is decisive to make that option economically attractive. The present study aimed to valorize the microalgae grown at a pilot scale and used for the treatment of the centrate from municipal sewage sludge, producing microalgal-based iron nanoparticles (ME-nFe), by hydrothermal carbonization.

Characterizing honey bee exposure and effects from pesticides for chemical prioritization and life cycle assessment.

Agricultural pesticides are key contributors to pollinator decline worldwide. However, methods for quantifying impacts associated with pollinator exposure to pesticides are currently missing in comparative risk screening, chemical substitution and prioritization, and life cycle impact assessment methods. To address this gap, we developed a method for quantifying pesticide field exposure and ecotoxicity effects of honey bees as most economically important pollinator species worldwide.

PCDD/F and dioxin-like PCB minimization: A 13-year experimental study along the flue gas cleaning system of a secondary aluminium refining plant.

A 13-years study shows that a careful design of the flue gas cleaning system of a full scale secondary aluminium refining plant results in a minimized and very stable emission of Polychlorinated Dibenzo-p-Dioxins (PCDD), Polychlorinated Dibenzo Furans (PCDF) and dioxin-like Polychlorinated Biphenyls (PCB). The value of equivalent toxicity of PCDD/F in the emission was definitely of an order of magnitude less than the regulation limit. In the initial flue gas cleaning system, the PCB mean fingerprint after the slow cooling of the flue gas was typical of de novo synthesis.

Lab-scale pyrolysis of the Automotive Shredder Residue light fraction and characterization of tar and solid products.

The general aim of this study is the recovery of Automotive Shredder Residue (ASR). The ASR light fraction, or car fluff, that was collected at an Italian shredding plant was pyrolysed at various temperatures (500-800°C) in a lab-scale reactor. The condensable gases (tar) and solid residue yields increased with decreasing temperature, and these products were characterized to suggest a potential use to reclaim them.

The rate-determining step in a low temperature PCDD/F formation from oxidative breakdown of native carbon in MSWI fly ash.

We developed a phenomenological approach to explain the kinetic experimental data of PCDD/F formation/destruction based on a reaction mechanism model at the congener group level. In the present work, we investigated the formation and destruction of PCDD/F on fly ash as a function of time at 280 °C, chlorine mass balance, evolution of the total equivalent toxicity and kinetic modelling. We determined that the volatilization process is negligible and that the reactive processes at short reaction times only become important above 300 °C.

Biological devulcanization of ground natural rubber by Gordonia desulfuricans DSM 44462(T) strain.

Due to the rapid increase of waste vulcanized rubber products, the development of low-cost, efficient, and selective devulcanization processes is needed. In this paper, the devulcanization ability of Gordonia desulfuricans DSM 44462(T) was evaluated by a design of experiments. The aim of the experimental design was to investigate the importance of parameters influencing the bacterial growth, such as the glucose concentration (C), dibenzothiophene concentration (DBT), and initial biomass (optical density, OD) in biodevulcanization process.

14th congress of combustion by-products and their health effects-origin, fate, and health effects of combustion-related air pollutants in the coming era of bio-based energy sources.

The 14th International Congress on Combustion By-Products and Their Health Effects was held in Umeå, Sweden from June 14th to 17th, 2015. The Congress, mainly sponsored by the National Institute of Environmental Health Sciences Superfund Research Program and the Swedish Research Council for Environment, Agricultural Sciences and Spatial Planning, focused on the "Origin, fate and health effects of combustion-related air pollutants in the coming era of bio-based energy sources". The international delegates included academic and government researchers, engineers, scientists, policymakers and representatives of industrial partners.

Genome and Phenotype Microarray Analyses of Rhodococcus sp. BCP1 and Rhodococcus opacus R7: Genetic Determinants and Metabolic Abilities with Environmental Relevance.

In this paper comparative genome and phenotype microarray analyses of Rhodococcus sp. BCP1 and Rhodococcus opacus R7 were performed. Rhodococcus sp.

Biodegradation of variable-chain-length n-alkanes in Rhodococcus opacus R7 and the involvement of an alkane hydroxylase system in the metabolism.

Rhodococcus opacus R7 is a Gram-positive bacterium isolated from a polycyclic aromatic hydrocarbon contaminated soil for its versatile metabolism; indeed the strain is able to grow on naphthalene, o-xylene, and several long- and medium-chain n-alkanes. In this work we determined the degradation of n-alkanes in Rhodococcus opacus R7 in presence of n-dodecane (C12), n-hexadecane (C16), n-eicosane (C20), n-tetracosane (C24) and the metabolic pathway in presence of C12. The consumption rate of C12 was 88%, of C16 was 69%, of C20 was 51% and of C24 it was 78%.

Viability study of automobile shredder residue as fuel.

Car Fluff samples collected from a shredding plant in Italy were classified based on particle size, and three different size fractions were obtained in this way. A comparison between these size fractions and the original light fluff was made from two different points of view: (i) the properties of each size fraction as a fuel were evaluated and (ii) the pollutants evolved when each size fraction was subjected to combustion were studied. The aim was to establish which size fraction would be the most suitable for the purposes of energy recovery.

Kinetic modeling of the formation and destruction of polychlorinated dibenzo-p-dioxin and dibenzofuran from fly ash native carbon at 300 °C.

The kinetics for the oxidative breakdown of native carbon in raw fly ash samples (RFA) and for the formation and destruction of polychlorinated dibenzo-p-dioxins (PCDD) and polychlorinated dibenzofurans (PCDF), abbreviated PCDD/F, were investigated using a flow-over solid system in which the RFA samples were thermally treated at 300 °C under synthetic air. This study investigated the correlation between the disappearance of the reagent and the formation of the products to gain insight into the underlying mechanisms that govern these reactions at congener groups level. The detailed analyses of the experimental concentration-time data revealed significant differences in the behavior between the 2,3,7,8-substituted PCDD and the 2,3,7,8-substituted PCDF, non-2,3,7,8-substituted PCDD and PCDF.

Antimicrobial activity of thin metallic silver flakes, waste products of a manufacturing process.

The aim of the research was to develop new products and processes from a manufacturing waste from an Italian metallurgic company. The company produced thin silver metallic films and the production scraps were silver flakes. The possibility to use the silver flakes in water disinfection processes was studied.

Kinetics of carbon degradation and PCDD/PCDF formation on MSWI fly ash.

The native carbon oxidation and PolyChloroDibenzo-p-Dioxins and PolyChloroDibenzoFurans, PCDD/F, formation were simultaneously studied at different temperatures (230-350 degrees C) and times (0-1440 min) in order to establish a direct correlation between the disappearance of the reagent and the formation of the products. The kinetic runs were conducted in an experimental set up where conditions were chosen to gain information on the role of fly ash deposits in cold zones of municipal solid waste incinerators in PCDD/F formation reaction. The carbon oxidation measured as the decrease of total organic carbon of fly ash was in agreement with the carbon evolved as sum of CO and CO(2).

Prevention of PCDD/F formation and minimization of their emission at the stack of a secondary aluminum casting plant.

Results of an extensive 5 year study on a full-scale plant with the specific aim to investigate polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzo furan (PCDF) formation and release in a secondary aluminum casting plant are reported. PCDD and PCDF concentrations were evaluated for all the gaseous and solid streams (no liquid stream was present) as well as for the flue gas upstream and downstream of every single unit of the flue gas cleaning system. The study highlights PCDD and PCDF formation particularly in the narrow 320-360 degrees C range.

Kinetic modeling of polychlorinated dibenzo-p-dioxin and dibenzofuran formation based on carbon degradation reactions.

Combustion experiments in a laboratory-scale fixed bed reactor were performed to determine the role of temperature and time in polychlorinated dibenzo-p-dioxin (PCDD) and polychlorinated dibenzofuran (PCDF) formation, allowing a global kinetic expression to be written for PCDD/F formation due to soot oxidation in fly ash deposits. Rate constants were calculated for the reactions of carbon degradation, PCDD/F formation, desorption, and degradation. For the first time, values for activation and thermodynamic parameters for the overall reactions have been calculated for PCDD/F formation, desorption, and destruction reactions.

Bioremediation of diesel fuel contaminated soil: effect of non ionic surfactants and selected bacteria addition.

Aim of this work was to evaluate influence of two commercial surfactants and inoculum of selected bacteria on biodegradation of diesel fuel in different systems. Among alkyl polyethossilates (Brij family) and sorbitan derivates (Tween family) a first selection of surfactants was performed by estimation of Koc and Dafnia magna EC50 with molecular descriptor and QSAR model. Further experiments were conducted to evaluate soil sorption, biodegradability and toxicity.