Regulatory preparedness for multicomponent nanomaterials: Current state, gaps and challenges of REACH.

In 2018 the European Commission adopted revisions to the Annexes of Regulation (EC) No 1907/2006 concerning registration, evaluation, authorisation and restriction of chemicals (REACH) to introduce nanomaterial-specific clarifications and provisions. Multicomponent nanomaterial (MCNM) is a non-regulatory term that has been used in recent EU-funded projects to describe nanomaterials with a complex structure and/or composition and which are expected to be increasingly used in products in the near future. This paper examines the regulatory preparedness of REACH, and its revised Annexes, for MCNMs.

Next Generation Risk Assessment approaches for advanced nanomaterials: Current status and future perspectives.

This manuscript discusses the challenges of applying New Approach Methodologies (NAMs) for safe by design and regulatory risk assessment of advanced nanomaterials (AdNMs). The authors propose a framework for Next Generation Risk Assessment of AdNMs involving NAMs that is aligned to the conventional risk assessment paradigm. This framework is exposure-driven, endpoint-specific, makes best use of pre-existing information, and can be implemented in tiers of increasing specificity and complexity of the adopted NAMs.

Normalised similarity assessment to inform grouping of advanced multi-component nanomaterials by means of an Asymmetric Sigmoid function.

This manuscript presents a procedure for similarity assessment as a basis for grouping of multi component nanomaterials (MCNMs). This methodology is an adaptation of the approach by Zabeo et al. (2022), which includes an impactful change: the calculated similarities are normalised in the [0,1] domain by means of asymmetric Logistic scaling to simplify comparisons among properties' distances.

An overview on dispersion procedures and testing methods for the ecotoxicity testing of nanomaterials in the marine environment.

Considerable efforts have been devoted to develop or adapt existing guidelines and protocols, to obtain robust and reproducible results from (eco)toxicological assays on engineered nanomaterials (NMs). However, while many studies investigated adverse effects of NMs on freshwater species, less attention was posed to the marine environment, a major sink for these contaminants. This review discusses the procedures used to assess the ecotoxicity of NMs in the marine environment, focusing on the use of protocols and methods for preparing NMs dispersions and on the NMs physicochemical characterization in exposure media.

Cytotoxicity inhibition of catechol's type molecules by grafting on TiO and FeO nanoparticles surface.

The potential toxicity deriving from the interaction between chemicals and manufactured nanoparticles (NPs) represents an emerging threat to the environment and human health. Several studies have focused on the risks and (eco)toxicity of manufactured NPs as a consequence of their extensive use in recent years, however, there is still a limited understanding of the combined effects caused by manufactured NPs in the presence of other environmental contaminants. This is particularly relevant to aquatic environments, where many types of pollutants are inevitably released and can be involved in many kinds of reactions.

Pulmonary toxicity and gene expression changes after short-term inhalation exposure to surface-modified copper oxide nanoparticles.

Copper oxide nanoparticles (CuO NPs) have previously been shown to cause dose-dependent pulmonary toxicity following inhalation. Here, CuO NPs (10 nm), coated with polyethylenimine (PEI) or ascorbate (ASC) resulting in positively or negatively charged NPs, respectively, were evaluated. Rats were exposed nose-only to similar exposure dose levels of ASC or PEI coated CuO NPs for 5 consecutive days.

Colloidal stability classification of TiO nanoparticles in artificial and in natural waters by cluster analysis and a global stability index: Influence of standard and natural colloidal particles.

In the field of exposure-driven risk assessment of engineered nanoparticles (NPs), the highly complex interactions of NPs with natural components in surface waters are considered key factors to understand their fate and behavior in the environment. However, since experimental approaches aiming at imitating environmentally relevant conditions include many parameters and lead to a high number of outcomes, statistical tools can be extremely useful to support the results' interpretation. In this context, a multimethod approach was applied to investigate the colloidal behavior of TiO NPs in both artificial waters and natural brackish water (from the Venice lagoon, Italy), in the presence of standard kaolinite and natural organic matter (NOM), or of the fine fraction of natural colloidal particles (NCPs) from the lagoon sediment.

Novel multimethod approach for the determination of the colloidal stability of nanomaterials in complex environmental mixtures using a global stability index: TiO as case study.

A systematic study on the colloidal behavior of uncoated and polyvinylpyrrolidone (PVP) coated TiO engineered nanomaterials (ENMs) in simulated aqueous media is herein reported, in which conditions representative for natural waters (pH, presence of divalent electrolytes (i.e. Ca/Mg and SO), of natural organic matter (NOM) and of suspended particulate matter (SPM)) were systematically varied.

Organic Polyradicals as Redox Mediators: Effect of Intramolecular Radical Interactions on Their Efficiency.

The spin-spin interactions between unpaired electrons in organic (poly)radicals, especially nitroxides, are largely investigated and are of crucial importance for their applications in areas such as organic magnetism, molecular charge transfer, or multiple spin labeling in structural biology. Recently, 2,2,6,6-tetramethylpiperidinyloxyl and polymers functionalized with nitroxides have been described as successful redox mediators in several electrochemical applications; however, the study of spin-spin interaction effect in such an area is absent. This communication reports the preparation of a novel family of discrete polynitroxide molecules, with the same number of radical units but different arrangements to study the effect of intramolecular spin-spin interactions on their electrochemical potential and their use as oxidation redox mediators in a Li-oxygen battery.

Tris-pyridylmethylamine (TPMA) complexes functionalized with persistent nitronyl nitroxide organic radicals.

The chance to have persistent organic radicals in combination with metals has attracted much interest since it offers the possibility of having new functional molecules with multiple open-shell elements. In this study, we report the synthesis of two tripodal tris(2-pyridyl)methylamine ligands (TPMA) functionalized with nitronyl nitroxide persistent radicals. The newly formed ligands have been used to coordinate zinc(ii), copper(ii), iron(ii) and cobalt(ii).

Consecutive thermal and wet conditioning treatments of sedimentary stabilized cementitious materials from HPSS® technology: Effects on leaching and microstructure.

Soil and sediment contamination is recognised as one of the most relevant environmental problems caused by past industrial activities and unsustainable waste disposal practices, highlighting the need to develop or improve effective remediation techniques to support sustainable management strategies. In this context, the remediation of sediments dredged from the Mincio river (Italy) contaminated by mercury and heavy hydrocarbons (C) was carried out by applying and implementing the High Performance Solidification/Stabilization technology, aimed at producing safe and reusable cement-based granular materials. The technology was improved by decreasing both the temperature and time of the thermal desorption treatment (from 280 to 110 °C and from 4-16 h to 70 min, respectively) and by including a wet conditioning step to the process.

Guiding the development of sustainable nano-enabled products for the conservation of works of art: proposal for a framework implementing the Safe by Design concept.

Nanotechnology provides innovative and promising solutions for the conservation of cultural heritage, but the development and application of new nano-enabled products pose concerns regarding their human health and environmental risks. To address these issues, we propose a sustainability framework implementing the Safe by Design concept to support product developers in the early steps of product development, with the aim to provide safer nano-formulations for conservation, while retaining their functionality. In addition, this framework can support the assessment of sustainability of new products and their comparison to their conventional chemical counterparts if any.

Interaction between Copper Oxide Nanoparticles and Amino Acids: Influence on the Antibacterial Activity.

The increasing concern about antibiotic-resistance has led to the search for alternative antimicrobial agents. In this effort, different metal oxide nanomaterials are currently under investigation, in order to assess their effectiveness, safety and mode of action. This study focused on CuO nanoparticles (CuO NPs) and was aimed at evaluating how the properties and the antimicrobial activity of these nanomaterials may be affected by the interaction with ligands present in biological and environmental media.

Extending substrate sensing capabilities of zinc tris(2-pyridylmethyl)amine-based stereodynamic probe.

Tripodal metal complexes have been widely used for catalysis and more recently also for molecular recognition applications. Their ability in recognition and signal amplification of chiral substrates is because of the setup of the ligand around the metal in a propeller shape. Within this subject, we have recently reported tris(2-pyridylmethyl)amine- and triphenolamine-based complexes for the determination of the enantiomeric excess of various substrates.

Toxicity of copper oxide and basic copper carbonate nanoparticles after short-term oral exposure in rats.

Copper oxide (CuO) nanoparticles (NPs) and copper carbonate nanoparticles (CuCO(OH) NPs have applications as antimicrobial agents and wood preservatives: an application that may lead to oral ingestion via hand to mouth transfer. Rats were exposed by oral gavage to CuO NPs and CuCO(OH) NPs for five consecutive days with doses from 1 to 512 mg/kg and 4 to 128 mg/kg per day, respectively, and toxicity was evaluated at days 6 and 26. Both CuO NPs and CuCO(OH) NPs induced changes in hematology parameters, as well as clinical chemistry markers (e.

Diasteroselective multi-component assemblies from dynamic covalent imine condensation and metal-coordination chemistry: mechanism and narcissistic stereochemistry self-sorting.

Self-assembly of a modified tris(2-pyridylmethyl)amine TPMA ligand, zinc(ii) or cobalt(ii) ions, and amino acids have been used effectively as stereo dynamic optical probes for the determination of the enantiomeric excess of free amino acids either using Electronic or Vibrational Circular Dichroism (CD and VCD). Herein, we report the mechanistic and stereochemical study of the self-assembly process which reveals a complex equilibrium in solution where even small variations in the experimental conditions can profoundly affect the final products of the reaction. In particular, variation on the metal stoichiometry switch give rises to an entirely enantio narcissistic self-assembly of the structure.

Environmental Impacts by Fragments Released from Nanoenabled Products: A Multiassay, Multimaterial Exploration by the SUN Approach.

Nanoenabled products (NEPs) have numerous outdoor uses in construction, transportation or consumer scenarios, and there is evidence that their fragments are released in the environment at low rates. We hypothesized that the lower surface availability of NEPs fragment reduced their environmental effects with respect to pristine nanomaterials. This hypothesis was explored by testing fragments generated by intentional micronisation ("the SUN approach"; Nowack et al.

Binding Profiles of Self-Assembled Supramolecular Cages from ESI-MS Based Methodology.

Confined molecular environments have peculiar characteristics that make their properties unique in the field of biological and chemical sciences. In recent years, advances in supramolecular capsule and cage synthesis have presented the possibility to interpret the principles behind their self-assembly and functions, which has led to new molecular systems that display outstanding properties in molecular recognition and catalysis. Herein, we report a rapid method based on ESI-MS to determine the binding profiles for linear saturated dicarboxylic acids in a series of different cages.

Cobalt, nickel, and iron complexes of 8-hydroxyquinoline-di(2-picolyl)amine for light-driven hydrogen evolution.

Novel cobalt, nickel, and iron complexes based on the pentadentate 8-hydroxyquinoline-di(2-picolyl)amine ligand were synthesized and thoroughly characterized. X-ray structures of both the cobalt and iron complexes were also obtained, showing the tendency to adopt a pseudo-octahedral geometry by coordination of an additional sixth ligand. These metal complexes were then studied as potential hydrogen-evolving catalysts (HECs) under both electrochemical and light-driven conditions.

A stereodynamic fluorescent probe for amino acids. Circular dichroism and circularly polarized luminescence analysis.

The use of stereodynamic probes is becoming one of the leading strategies for the fast and effective determination of enantiomeric excess. Recently, we reported a series of novel molecular architectures based on a modified tris(2-pyridylmethyl)amine complex (TPMA), which are able to amplify the electronic CD, in the case of Zn(II) assemblies and vibrational CD, in the case of Co(II) assemblies. Herein, we report a structural modification of the ligand with the purpose to obtain a fluorescent chiral probe.

Triggering Assembly and Disassembly of a Supramolecular Cage.

A novel supramolecular cage built from the self-assembly of tris(2-pyridylmethyl)amine zinc complexes through imine condensation chemistry is reported. The cage recognition properties over a variety of structurally related guests, together with the kinetic study of the template assembly and disassembly, have been investigated in detail. This knowledge has been used to selectively modulate the rate of both assembly and disassembly processes.

Photoinduced hydrogen evolution with new tetradentate cobalt(ii) complexes based on the TPMA ligand.

Hydrogen production from water splitting is nowadays recognized as a target, fundamental reaction for the production of clean fuels. Indeed, tremendous efforts have been devoted towards the research of suitable catalysts capable of performing this reaction. With respect to heterogeneous systems, molecular catalysts such as metal complexes are amenable to chemical functionalization in order to fine tune the catalytic properties.

Effective bromo and chloro peroxidation catalysed by tungsten(vi) amino triphenolate complexes.

Amino triphenolate tungsten(vi) complexes have been prepared and they proved to be efficient catalysts in haloperoxidation reactions using hydrogen peroxide as a terminal oxidant and inorganic sources of halides. In particular, interesting results have been obtained in the challenging chloroperoxidation reactivity (catalyst loading down to 0.05% with TONs up to 900).

Co(ii)-induced giant vibrational CD provides a new design of methods for rapid and sensitive chirality recognition.

We designed a stereodynamic system, where the chirality of the analyte serves as a template for the helicity of the first coordination sphere of Co(ii). Giant VCD bands induced by Co(ii) allow the measurement of a completely significant and conclusive VCD spectrum in only a few seconds and/or on minute quantities of the analyte. This paves the way for the development of similar protocols, overcoming the limitations due to weak VCD signals for the assignment of absolute configurations.

Multimetallic Architectures from the Self-assembly of Amino Acids and Tris(2-pyridylmethyl)amine Zinc(II) Complexes: Circular Dichroism Enhancement by Chromophores Organization.

Stereodynamic optical probes are becoming very popular for their capability to act as molecular sensors for the determination of the enantiomeric excess (ee) of chiral compounds. Herein, we describe a new molecular architecture formed by the self-assembly of three zinc metal ions, two modified tris(2-pyridylmethyl)amine ligands, and two amino acids. This system is the structural and functional serendipitous evolution of our previous probe for the determination of amino acids ee.