Design and test of a rigid endomicroscopic system for multimodal imaging and femtosecond laser ablation.

Significance: Conventional diagnosis of laryngeal cancer is normally made by a combination of endoscopic examination, a subsequent biopsy, and histopathology, but this requires several days and unnecessary biopsies can increase pathologist workload. Nonlinear imaging implemented through endoscopy can shorten this diagnosis time, and localize the margin of the cancerous area with high resolution.

Aim: Develop a rigid endomicroscope for the head and neck region, aiming for multimodal imaging with a large field of view (FOV) and tissue ablation.

Carrier-envelope phase stable few-cycle laser system delivering more than 100 W, 1 mJ, sub-2-cycle pulses.

Two-stage multipass-cell compression of a fiber-chirped-pulse amplifier system to the few-cycle regime is presented. The output delivers a sub-2-cycle (5.8 fs), 107 W average power, 1.

Carrier-envelope offset stable, coherently combined ytterbium-doped fiber CPA delivering 1 kW of average power.

We present a carrier-envelope offset (CEO) stable ytterbium-doped fiber chirped-pulse amplification system employing the technology of coherent beam combining and delivering more than 1 kW of average power at a pulse repetition rate of 80 MHz. The CEO stability of the system is 220 mrad rms, characterized out-of-loop with an f-to-2f interferometer in a frequency offset range of 10 Hz to 20 MHz. The high-power amplification system boosts the average power of the CEO stable oscillator by five orders of magnitude while increasing the phase noise by only 100 mrad.

87-W 1018-nm Yb-fiber ultrafast seeding source for cryogenic Yb: yttrium lithium fluoride amplifier.

We demonstrate a compact and robust Yb-fiber master-oscillator power-amplifier system operating at 1018 nm with 2.5-nm bandwidth and 1-ns stretched pulse duration. It produces 87-W average power and 4.

Adaptive pre-amplification pulse shaping in a high-power, coherently combined fiber laser system.

We report on the successful implementation of an adaptive pre-amplification pulse shaping technique in a high-power, coherently combined fiber laser system to achieve sub-300-fs pulse durations at 320 W average power and 3.2 mJ pulse energy. The pulse shaper is utilized to impose a gain flattening mask to increase the spectral width of the amplified pulse by 60%.

Temporal contrast enhancement of energetic laser pulses by filtered self-phase-modulation-broadened spectra.

We present a novel approach for temporal contrast enhancement of energetic laser pulses by filtered self-phase-modulation-broadened spectra. A measured temporal contrast enhancement by at least seven orders of magnitude in a simple setup has been achieved. This technique is applicable to a wide range of laser parameters and poses a highly efficient alternative to existing contrast-enhancement methods.

Energetic sub-2-cycle laser with 216 W average power.

Few-cycle lasers are essential for many research areas such as attosecond physics that promise to address fundamental questions in science and technology. Therefore, further advancements are connected to significant progress in the underlying laser technology. Here, two-stage nonlinear compression of a 660 W femtosecond fiber laser system is utilized to achieve unprecedented average power levels of energetic ultrashort or even few-cycle laser pulses.

High-repetition-rate and high-photon-flux 70 eV high-harmonic source for coincidence ion imaging of gas-phase molecules.

Unraveling and controlling chemical dynamics requires techniques to image structural changes of molecules with femtosecond temporal and picometer spatial resolution. Ultrashort-pulse x-ray free-electron lasers have significantly advanced the field by enabling advanced pump-probe schemes. There is an increasing interest in using table-top photon sources enabled by high-harmonic generation of ultrashort-pulse lasers for such studies.

Phase stabilization of spatiotemporally multiplexed ultrafast amplifiers.

Actively stabilized, simultaneous spatial and temporal coherent beam combination is a promising power-scaling technique for ultrafast laser systems. For a temporal combination based on optical delay lines, multiple stable states of operation arise for common stabilization techniques. A time resolved Jones' calculus is applied to investigate the issue.

Extraction of enhanced, ultrashort laser pulses from a passive 10-MHz stack-and-dump cavity.

Periodic dumping of ultrashort laser pulses from a passive multi-MHz repetition-rate enhancement cavity is a promising route towards multi-kHz repetition-rate pulses with Joule-level energies at an unparalleled average power. Here, we demonstrate this so-called stack-and-dump scheme with a 30-m-long cavity. Using an acousto-optic modulator, we extract pulses of 0.

Acousto-optic pulse picking scheme with carrier-frequency-to-pulse-repetition-rate synchronization.

We introduce and experimentally validate a pulse picking technique based on a travelling-wave-type acousto-optic modulator (AOM) having the AOM carrier frequency synchronized to the repetition rate of the original pulse train. As a consequence, the phase noise characteristic of the original pulse train is largely preserved, rendering this technique suitable for applications requiring carrier-envelope phase stabilization. In a proof-of-principle experiment, the 1030-nm spectral part of an 74-MHz, carrier-envelope phase stable Ti:sapphire oscillator is amplified and reduced in pulse repetition frequency by a factor of two, maintaining an unprecedentedly low carrier-envelope phase noise spectral density of below 68 mrad.

Femtosecond Enhancement Cavities in the Nonlinear Regime.

We combine high-finesse optical resonators and spatial-spectral interferometry to a highly phase-sensitive investigation technique for nonlinear light-matter interactions. We experimentally validate an ab initio model for the nonlinear response of a resonator housing a gas target, permitting the global optimization of intracavity conversion processes like high-order harmonic generation. We predict the feasibility of driving intracavity high-order harmonic generation far beyond intensity limitations observed in state-of-the-art systems by exploiting the intracavity nonlinearity to compress the pulses in time.

Balancing of thermal lenses in enhancement cavities with transmissive elements.

Thermal lensing poses a serious challenge for the power scaling of enhancement cavities, in particular when these contain transmissive elements. We demonstrate the compensation of the lensing induced by thermal deformations of the cavity mirrors with the thermal lensing in a thin Brewster plate. Using forced convection to fine-tune the lensing in the plate, we achieve average powers of up to 160 kW for 250-MHz-repetition-rate picosecond pulses with a power-independent mode size.

Multidimensional coherent pulse addition of ultrashort laser pulses.

Spatially and temporally separated amplification and subsequent coherent addition of femtosecond pulses is a promising performance-scaling approach for ultrafast laser systems. Herein we demonstrate for the first time the application of this multidimensional scheme in a scalable architecture. Applying actively controlled divided-pulse amplification producing up to four pulse replicas that are amplified in two ytterbium-doped step-index fibers (6 μm core), pulse energies far beyond the damage threshold of the single fiber have been achieved.

Pre-chirp managed nonlinear amplification in fibers delivering 100 W, 60 fs pulses.

We demonstrate a pre-chirp managed Yb-doped fiber laser system that outputs 75 MHz, 130 W spectrally broadened pulses, which are compressed by a diffraction-grating pair to 60 fs with average powers as high as 100 W. Fine tuning the pulse chirp prior to amplification leads to high-quality compressed pulses. Detailed experiments and numerical simulation reveal that the optimum pre-chirp group-delay dispersion increases from negative to positive with increasing output power for rod-type high-power fiber amplifiers.

22 GW peak-power fiber chirped-pulse-amplification system.

In this Letter, we report on a femtosecond fiber chirped-pulse-amplification system based on the coherent combination of the output of four ytterbium-doped large-pitch fibers. Each single channel delivers a peak power of about 6.2 GW after compression.

53 W average power few-cycle fiber laser system generating soft x rays up to the water window.

We report on a few-cycle laser system delivering sub-8-fs pulses with 353 μJ pulse energy and 25 GW of peak power at up to 150 kHz repetition rate. The corresponding average output power is as high as 53 W, which represents the highest average power obtained from any few-cycle laser architecture so far. The combination of both high average and high peak power provides unique opportunities for applications.

Coherent combination of spectrally broadened femtosecond pulses for nonlinear compression.

The coherent combination of ultrashort pulses has recently been established as a technique to overcome the limitations of laser amplifiers regarding pulse peak-power, pulse energy, and average power. Similar limitations also occur in nonlinear compression setups. In a proof-of-principle experiment, we show that the techniques developed for the combination of amplifiers can be adapted to nonlinear compression.

Coherent beam combination of Yb:YAG single-crystal rod amplifiers.

Coherent combination of ultrashort laser pulses emitted from spatially separated amplifiers is a promising power-scaling technique for ultrafast laser systems. It has been successfully applied to fiber amplifiers, since guidance of the signal provides the advantage of an excellent beam quality and straightforward superposition of beams as compared to bulk-type amplifier implementations. Herein we demonstrate, for the first time to our knowledge, a two-channel combining scheme employing Yb:YAG single-crystal rod amplifiers as an energy booster in a fiber chirped-pulse amplification system.

Megawatt-scale average-power ultrashort pulses in an enhancement cavity.

We investigate power scaling of ultrashort-pulse enhancement cavities. We propose a model for the sensitivity of a cavity design to thermal deformations of the mirrors due to the high circulating powers. Using this model and optimized cavity mirrors, we demonstrate 400 kW of average power with 250 fs pulses and 670 kW with 10 ps pulses at a central wavelength of 1040 nm and a repetition rate of 250 MHz.

Cavity-enhanced high-harmonic generation with spatially tailored driving fields.

We theoretically and experimentally investigate high-harmonic generation in a 78-MHz enhancement cavity with a transverse mode having on-axis intensity maxima at the focus and minima at an opening in the following mirror. We find that the conversion efficiency is comparable to that achievable with a Gaussian mode, whereas the output coupling efficiency can be significantly improved over any other demonstrated technique. This approach offers additional power scaling advantages and additional degrees of freedom in shaping the harmonic emission, paving the way to high-power extreme-ultraviolet frequency combs and the generation of multi-MHz repetition-rate-isolated attosecond pulses.

Energy scaling of femtosecond amplifiers using actively controlled divided-pulse amplification.

Divided-pulse amplification is a promising method for the energy scaling of femtosecond laser amplifiers, where pulses are temporally split prior to amplification and coherently recombined afterwards. We present a method that uses an actively stabilized setup with separated stages for splitting and combining. The additional degrees of freedom can be employed to mitigate the limitations originating from saturation of the amplifier that cannot be compensated in passive double-pass configurations using just one common stage for pulse splitting and combining.

Triple-clad large-pitch fibers for compact high-power pulsed fiber laser systems.

We present a novel ytterbium (Yb)-doped large-pitch fiber design with significantly increased pump absorption and higher energy storage/gain per unit length, which enables high-peak-power fiber laser systems with smaller footprints. Up to now index matching between core and surrounding material in microstructured fibers was achieved by co-doping the active core region with fluorine. Here we carry out the index matching by passively doping the cladding with germanium, thus raising its index of refraction.

Analysis of passively combined divided-pulse amplification as an energy-scaling concept.

The energy scaling of ultrashort-pulse systems employing simultaneously the techniques of chirped-pulse amplification and passively combined divided-pulse amplification is analyzed both experimentally and numerically. The maximum achievable efficiency is investigated and fundamental limitations originating from gain saturation, self-phase modulation and depolarization are discussed. A solution to these limitations could be an active stabilization scheme, which would allow for the operation of every single fiber amplifier at higher pulse energies.

Divided-pulse nonlinear compression.

We report on the nonlinear pulse compression of temporally divided pulses, which is presented in a proof-of-principle experiment. A single 320 fs pulse is divided into four replicas, spectrally broadened in a solid-core fiber, and subsequently recombined. This approach makes it possible to reduce the nonlinearities in the fiber and therefore to use total input peak power of about 13.