Axial and Rotational Malreduction (Golf Club Deformity) in Distal Femur Fractures.

Objectives: To describe malreduction of supracondylar distal femur fractures stabilized with lateral femoral locking plates and determine whether a mismatch in axial lateral distal femur anatomy and lateral distal femoral plate design contributes to supracondylar distal femoral fracture malreduction.

Materials And Methods: OTA/AO 33A were simulated in 7 cadaver femurs and fixed with a lateral distal locking femoral plate placed flush to the lateral femoral condyle (group 1). In group 2, the anterior flange of the plate was externally rotated 10 degrees in relation to the lateral condyle.

Does coating an intramedullary nail with polymethylmethacrylate improve mechanical stability at the fracture site?

Background: Treatment of tibia diaphyseal fractures with intramedullary nail fixation has proven to be effective. An increasingly popular practice is to coat the nail with bone cement incorporating antibiotics for the purpose of treating and/or preventing infection. To date, the effect of coating on the mechanical performance of the intramedullary nail once implanted is unknown.

Biomechanical Comparison between Volar Plate Fixator and Nonbridge External Wrist Fixator.

Intra-articular distal radius fractures are difficult to reduce and maintain by nonoperative means. ORIF leaves implants in the patient long after the fracture is healed. External fixation can stabilize the reduced fracture and leaves no long-term implants.

Comparison of Biomechanical Properties of a Synthetic L3-S1 Spine Model and Cadaveric Human Samples.

Human cadavers currently represent the gold standard for spine biomechanical testing, but limitations such as costs, storage, handling, and high interspecimen variance motivate the development of alternatives. A commercially available synthetic surrogate for the human spine, the Sawbones spine model (SBSM), has been developed. The equivalence of SBSM to a human cadaver in terms of biomechanical behavior has not been fully assessed.

Cerclage Cable Tensioning of Intraoperative Hip Arthroplasty Proximal Femoral Fractures: A Cadaveric Model.

Cerclage fixation following intraoperative fracture of the proximal femur during total hip arthroplasty (THA) carries a risk of compromising the femoral blood supply. Thus, we sought to determine the minimum cerclage cable tension required to restore the stability of a cementless femoral stem. Cementless femoral prostheses were implanted in seven proximal femoral cadaver specimens, and a periprosthetic fracture was simulated in the medial cortex.

Mechanical performance and implications on bone healing of different screw configurations for plate fixation of diaphyseal tibia fractures: a computational study.

Diaphyseal tibia fractures may require plate fixation for proper healing to occur. Currently, there is no consensus on the number of screws required for proper fixation or the optimal placement of the screws within the plate. Mechanical stability of the construct is a leading criterion for choosing plate and screws configuration.

Effects of Lumbosacral Arthrodesis on the Biomechanics of the Sacroiliac Joint.

Background: It is unclear whether the sacroiliac joint is vulnerable to adjacent segment disease. Clinical studies have suggested that many patients who have undergone lumbar arthrodesis will develop adjacent segment disease, which may contribute to sacroiliac joint degeneration. The purpose of the present study was to examine whether arthrodesis in the lumbar spine results in altered biomechanics at the sacroiliac joint that could contribute to adjacent segment disease within the joint.

Supplemental Fixation of Inner Graft Limbs in All-Inside, Quadrupled, Single-Tendon Anterior Cruciate Ligament Reconstruction Graft Construct Yields Improved Biomechanical Properties.

Purpose: To compare the time-zero load to failure of a quadrupled, single-tendon, all-inside anterior cruciate ligament (ACL) reconstruction graft construct with (supplemented) and without the incorporation of inner-limb whipstitch sutures (control) into a tibial suspensory fixation button.

Methods: Eight matched pairs of peroneus longus tendons were prepared according to a quadrupled, all-inside ACL soft-tissue graft technique with 1 side serving as a control and the contralateral side supplemented. The constructs were biomechanically tested for strain in the inner and outer limbs during a preconditioning protocol, single-cycle load to failure, and elongation of the whole construct.

Effects of gamma irradiation on the biomechanical properties of peroneus tendons.

Purpose: This study was designed to investigate the biomechanical properties of nonirradiated (NI) and irradiated (IR) peroneus tendons to determine if they would be suitable allografts, in regards to biomechanical properties, for anterior cruciate ligament reconstruction after a dose of 1.5-2.5 Mrad.

Biomechanical Analysis of All-Inside, Arthroscopic Suture Repair Versus Extensor Retinaculum Capsulorrhaphy for Triangular Fibrocartilage Complex Tears With Instability.

Purpose: To assess ulnocarpal joint stability after treatment of a peripheral triangular fibrocartilage complex (TFCC) injury with all-inside arthroscopic suture repair (SR), extensor retinaculum capsulorrhaphy with the Herbert sling (HS), and a combination of both (SR+HS).

Methods: Twelve fresh-frozen, age-matched, upper-extremity specimens intact from the distal humerus were prepared. Nondestructive mechanical testing was performed to assess native ulnocarpal joint stability and load-displacement curves were recorded.

Biomechanical evaluation of periprosthetic refractures following distal femur locking plate fixation.

Introduction: Distal femur fractures proximal to total knee femoral component constitutes the most prevalent type of periprosthetic fracture, and plate fixation treatment is associated with a 7.7% incidence of refracture proximal to the plate. The primary objective of this study was to compare proximal fixation techniques of a periprosthetic distal femur fracture plate in an osteoporotic bone model.

Biomechanical analysis of four- versus six-screw constructs for short-segment pedicle screw and rod instrumentation of unstable thoracolumbar fractures.

Background Context: Conventionally, short-segment fusion involves instrumentation of one healthy vertebra above and below the injured vertebra, skipping the injured level. This short-segment construct places less surgical burden on the patient compared with long-segment constructs, but is less stable biomechanically, and thus has resulted in clinical failures. The addition of two screws placed in the fractured vertebral body represents an attempt to improve the construct stiffness without sacrificing the benefits of short-segment fusion.

Peripheral triangular fibrocartilage complex tears cause ulnocarpal instability: a biomechanical pilot study.

Background: Instability at the ulnocarpal joint has many causes, but the common thread among these causes is the presence of abnormalities in the triangular fibrocartilage complex (TFCC). However, the biomechanical consequences at the ulnocarpal joint after detachment of the TFCC from the ulnar styloid are not clearly defined. Better delineation of whether peripheral TFCC detachments cause ulnocarpal instability will help to design surgical treatments.

Comparison of 2 forearm reconstructions for longitudinal radioulnar dissociation: a cadaver study.

Purpose: We present the results of a cadaveric study of 2 forearm reconstructions with radial head replacement for longitudinal radioulnar dissociation injuries.

Methods: We created a simulated longitudinal radioulnar dissociation injury in 8 cadaver forearms. Two reconstructions were performed alternately on each arm: patellar tendon interosseous ligament complex reconstruction and the Herbert sling extensor retinaculum plication.

Adjacent-level biomechanics after single versus multilevel cervical spine fusion.

Object: Previous studies have demonstrated that patients with spinal fusion are at greater risk for adjacent-segment disease and require additional surgery. It has been postulated that excessive motion of a given motion segment unit (MSU) leads to an increased risk of disc degeneration. It is the authors' hypothesis that a greater increase in adjacent-segment motion will be observed following a 2-level versus a single-level anterior cervical discectomy and instrumented fusion (ACDF).

Building a biomechanical model.

This article is based on an invited presentation at the Biomechanics Session for the Basic Science Focus Forum held at the Orthopaedic Trauma Association meeting, 2010. It is not intended to be a scientific presentation of any specific investigation. It presented aspects of several types of investigations to illustrate the variety of biomechanical models that are used, and what value can be derived from those models.

The efficacy of cylindrical titanium mesh cage for the reconstruction of a critical-size canine segmental femoral diaphyseal defect.

The authors developed a novel technique for the reconstruction of large segmental long bone defects using a cylindrical titanium mesh cage (CTMC). Although the initial clinical reports have been favorable, the CTMC technique has yet to be validated in a clinically relevant large animal model, which is the purpose of this study. Under general anesthesia, a unilateral, 3-cm mid-diaphyseal segmental defect was created in the femur of an adult canine.

The role of soft tissues in plate fixation of proximal phalanx fractures.

The tension band effect of plate fixation and the contribution of soft tissues to that effect was examined biomechanically in human proximal phalanges. Forty-six proximal phalanges in whole cadaver hands with all soft tissues in place (intact) and 43 proximal phalanges stripped of soft tissues (denuded) were tested. After midshaft osteotomy, each proximal phalanx was fixed internally with a dorsal minicondylar plate, a lateral minicondylar plate, a dorsal straight plate, or a lateral straight plate.

Role of soft tissues in metacarpal fracture fixation.

The contribution of soft tissues in stabilizing fracture fixation in metacarpals is appreciated clinically, but no quantitative biomechanical study of their role has been done. All previous studies of fracture fixation in vitro have been done on metacarpals denuded of soft tissues. To quantify the role of soft tissues in metacarpal fracture fixation, the biomechanical effectiveness of four fixation devices was examined in human cadaver metacarpals with and without soft tissues.