NMR Longitudinal Rotating Frame Relaxation Time (T) with a Weak Spin Locking Field as an Approach to Characterize Solid-State Active Pharmaceutical Ingredients: Proof of Concept.

Nuclear magnetic resonance (NMR) longitudinal rotating frame relaxation time (T), rarely used in low-field NMR, can be more effective than conventional T and T relaxation times to differentiate polymorphic forms of solid pharmaceuticals. This could be attributed to T sensibility to structural and molecular dynamics that can be enhanced by changing the strength of the oscillating magnetic field () of spinlock pulses. Here, we compared the capacity of T, T, and T to differentiate inactive (A) and active (C) crystalline forms of the World Health Organization essential drug Mebendazole.

Enzymatic production of xylooligosaccharides from corn cobs: Assessment of two different pretreatment strategies.

Corn cobs (CCs) are abundant xylan-rich agricultural wastes. Here, we compared CCs XOS yields obtained via two different pretreatment routs, alkali and hydrothermal, using a set of recombinant endo- and exo-acting enzymes from GH10 and GH11 families, which have different restrictions for xylan substitutions. Furthermore, impacts of the pretreatments on chemical composition and physical structure of the CCs samples were evaluated.

Real-Time Monitoring Polymerization Reactions Using Dipolar Echoes in H Time Domain NMR at a Low Magnetic Field.

H time domain nuclear magnetic resonance (H TD-NMR) at a low magnetic field becomes a powerful technique for the structure and dynamics characterization of soft organic materials. This relies mostly on the method sensitivity to the H-H magnetic dipolar couplings, which depend on the molecular orientation with respect to the applied magnetic field. On the other hand, the good sensitivity of the H detection makes it possible to monitor real time processes that modify the dipolar coupling as a result of changes in the molecular mobility.

Batch and continuous adsorption of Cu(II) and Zn(II) ions from aqueous solution on bi-functionalized sugarcane-based biosorbent.

A new one-pot synthesis method optimized by a 2 experimental design was developed to prepare a biosorbent, sugarcane bagasse cellulose succinate pyromellitate (SBSPy), for the removal of Cu(II) and Zn(II) from single-component aqueous solutions, in batch and continuous modes. The bi-functionalization of the biosorbent with ligands of different chemical structures increased its selectivity, improving its performance for removing pollutants from contaminated water. The succinate moiety favored Cu(II) adsorption, while the pyromellitate moiety favored Zn(II) adsorption.

Insight into morphological, physicochemical and spectroscopic properties of β-chitin nanocrystalline structures.

We systematically investigated the effect of β-chitin (BCH) particle size on the preparation of nanocrystals/nanowhiskers (CWH) by acid hydrolysis. Regardless this variable, CWH aqueous suspension exhibited outstanding stability and the average degree of acetylation remained nearly constant after the acid treatment. In contrast, the morphology, dimensions, crystallinity, and molecular weight of CHW were significantly affect by the particle size.

Fast-forward approach of time-domain NMR relaxometry for solid-state chemistry of chitosan.

Chitosans with different average degrees of acetylation and weight molecular weight were analyzed by time-domain NMR relaxometry using the recently proposed pulse sequence named Rhim and Kessemeier - Radiofrequency Optimized Solid-Echo (RK-ROSE) to acquire H NMR signal of solid-state materials. The NMR signal decay was composed of faster (tenths of μs) and longer components, where the mobile-part fraction exhibited an effective relaxation transverse time assigned to methyl hydrogens from N-acetyl-d-glucosamine (GlcNAc) units. The higher intrinsic mobility of methyl groups was confirmed via DIPSHIFT experiments by probing the H-C dipolar interaction.

Power-optimized, time-reversal pulse sequence for a robust recovery of signals from rigid segments using time domain NMR.

Time domain NMR (TD-NMR) has been widely used on the analysis of liquids or liquid components in heterogeneous materials such as food, biological tissues, synthetic and bio polymers, oil-bearing rocks, biomasses and cement-based materials. The use of TD-NMR for studying solid and soft mater has been growing in number and variety of applications, mostly for organic systems where the detection of H signals is highly advantageous. However, the strong H-H dipolar interactions in solids make the H FID to decay in the same order of the dead time of most commercially available NMR probe heads.

Mechanically robust cationic cellulose nanofibril 3D scaffolds with tuneable biomimetic porosity for cell culture.

3D foam scaffolds were produced in a "bottom-up" approach from lyophilised cationic cellulose nanofibril (CCNF) dispersions and emulsions (CCNF degree of substitution 23.0 ± 0.9%), using a directional freezing/lyophilisation approach, producing internal architectures ranging from aligned smooth walled micro channels, mimicking vascularised tissue, to pumice-like wall textures, reminiscent of porous bone.

Synthesis and application of sugarcane bagasse cellulose mixed esters. Part I: Removal of Co and Ni from single spiked aqueous solutions in batch mode using sugarcane bagasse cellulose succinate phthalate.

Sugarcane bagasse cellulose mixed ester succinate phthalate (SBSPh) was synthesized by a novel one-pot reaction method. The effects of temperature, time and mole fraction of succinic anhydride (χ) on the responses weight gain (wg), number of carboxylic acid groups (n), and adsorption capacity (q) of Co and Ni were evaluated by a 2 experimental design. The chemical structure of the material was elucidated by Fourier transform infrared, C Multiple Cross-Polarization solid-state NMR spectroscopy and H NMR relaxometry.

Defining functional diversity for lignocellulose degradation in a microbial community using multi-omics studies.

Background: Lignocellulose is one of the most abundant forms of fixed carbon in the biosphere. Current industrial approaches to the degradation of lignocellulose employ enzyme mixtures, usually from a single fungal species, which are only effective in hydrolyzing polysaccharides following biomass pre-treatments. While the enzymatic mechanisms of lignocellulose degradation have been characterized in detail in individual microbial species, the microbial communities that efficiently breakdown plant materials in nature are species rich and secrete a myriad of enzymes to perform "community-level" metabolism of lignocellulose.

GH43 endo-arabinanase from Bacillus licheniformis: Structure, activity and unexpected synergistic effect on cellulose enzymatic hydrolysis.

The hydrolysis of the plant biomass provides many interesting opportunities for the generation of building blocks for the green chemistry industrial applications. An important progress has been made for the hydrolysis of the cellulosic component of the biomass while, for the hemicellulosic components, the advances are less straightforward. Here, we describe the cloning, expression and biochemical and structural characterization of BlAbn1, a GH43 arabinanase from Bacillus licheniformis.

Targeted metatranscriptomics of compost-derived consortia reveals a GH11 exerting an unusual exo-1,4-β-xylanase activity.

Background: Using globally abundant crop residues as a carbon source for energy generation and renewable chemicals production stand out as a promising solution to reduce current dependency on fossil fuels. In nature, such as in compost habitats, microbial communities efficiently degrade the available plant biomass using a diverse set of synergistic enzymes. However, deconstruction of lignocellulose remains a challenge for industry due to recalcitrant nature of the substrate and the inefficiency of the enzyme systems available, making the economic production of lignocellulosic biofuels difficult.

Dipolar filtered magic-sandwich-echoes as a tool for probing molecular motions using time domain NMR.

We present a simple H NMR approach for characterizing intermediate to fast regime molecular motions using H time-domain NMR at low magnetic field. The method is based on a Goldmann Shen dipolar filter (DF) followed by a Mixed Magic Sandwich Echo (MSE). The dipolar filter suppresses the signals arising from molecular segments presenting sub kHz mobility, so only signals from mobile segments are detected.

Folding of xylan onto cellulose fibrils in plant cell walls revealed by solid-state NMR.

Exploitation of plant lignocellulosic biomass is hampered by our ignorance of the molecular basis for its properties such as strength and digestibility. Xylan, the most prevalent non-cellulosic polysaccharide, binds to cellulose microfibrils. The nature of this interaction remains unclear, despite its importance.

Observation of Time-Invariant Coherence in a Nuclear Magnetic Resonance Quantum Simulator.

The ability to live in coherent superpositions is a signature trait of quantum systems and constitutes an irreplaceable resource for quantum-enhanced technologies. However, decoherence effects usually destroy quantum superpositions. It was recently predicted that, in a composite quantum system exposed to dephasing noise, quantum coherence in a transversal reference basis can stay protected for an indefinite time.

On resonance phase alternated CWFP sequences for rapid and simultaneous measurement of relaxation times.

T1 and T2 relaxation times have been frequently used as probes for physical-chemical properties in several time-domain NMR applications (TD-NMR) such as food, polymers and petroleum industries. T2 measurements are usually achieved using the traditional Carr-Purcell-Meiboom-Gill (CPMG) pulse sequence because it is a fast and robust method. On the other hand, the traditional methods for determining T1, i.

Quantitative (13)C MultiCP solid-state NMR as a tool for evaluation of cellulose crystallinity index measured directly inside sugarcane biomass.

Background: The crystallinity index (CI) is often associated with changes in cellulose structure after biological and physicochemical pretreatments. While some results obtained with lignocellulosic biomass demonstrate a progressive increase in the CI as a function of pretreatments, it is also shown that the CI can significantly vary depending on the choice of the measurement method. Besides, the influence of the CI on the recalcitrance of biomass has been controversial for a long time, but the most recent results tend to point out that the efficiency of pretreatments in reducing the recalcitrance is not clearly correlated with the decrease of the CI.

A double-component Anderson-Weiss approach for describing NMR signals of mobile SIn units: application to constant-time DIPSHIFT experiments.

A composed Gaussian local field is proposed to describe the effect of molecular motions on NMR signals of SIn units (e.g., CHn or NHn), based upon the well-know Anderson-Weiss (AW) approximation.

Multi-scale structural and chemical analysis of sugarcane bagasse in the process of sequential acid-base pretreatment and ethanol production by Scheffersomyces shehatae and Saccharomyces cerevisiae.

Background: Heavy usage of gasoline, burgeoning fuel prices, and environmental issues have paved the way for the exploration of cellulosic ethanol. Cellulosic ethanol production technologies are emerging and require continued technological advancements. One of the most challenging issues is the pretreatment of lignocellulosic biomass for the desired sugars yields after enzymatic hydrolysis.

Avoiding bias effects in NMR experiments for heteronuclear dipole-dipole coupling determinations: principles and application to organic semiconductor materials.

Carbon-proton dipole-dipole couplings between bonded atoms represent a popular probe of molecular dynamics in soft materials or biomolecules. Their site-resolved determination, for example, by using the popular DIPSHIFT experiment, can be challenged by spectral overlap with nonbonded carbon atoms. The problem can be solved by using very short cross-polarization (CP) contact times, however, the measured modulation curves then deviate strongly from the theoretically predicted shape, which is caused by the dependence of the CP efficiency on the orientation of the CH vector, leading to an anisotropic magnetization distribution even for isotropic samples.

Molecular Dynamics of Poly(Ethylene Glycol) Intercalated in Clay, Studied Using C Solid-State NMR.

In this study, Cross-Polarization Magic-angle Spinning CP/MAS, 2D Exchange, Centerband-Only Detection of Exchange (CODEX), and Separated-Local-Field (SLF) NMR experiments were used to study the molecular dynamics of poly(ethylene glycol) (PEG) inside Hectorite/PEG intercalation compounds in both single- and double-layer configurations. The results revealed that the overall amplitude of the motions of the PEG chain in the single-layer configuration is considerably smaller than that observed for the double-layer intercalation compound. This result indicates that the effect of having the polymer chain interacting with both clay platelets is to produce a substantial decrease in the motional amplitudes of those chains.

Quantum information processing by nuclear magnetic resonance on quadrupolar nuclei.

Nuclear magnetic resonance is viewed as an important technique for the implementation of many quantum information algorithms and protocols. Although the most straightforward approach is to use the two-level system composed of spin 1/2 nuclei as qubits, quadrupolar nuclei, which possess a spin greater than 1/2, are being used as an alternative. In this study, we show some unique features of quadrupolar systems for quantum information processing, with an emphasis on the ability to execute efficient quantum state tomography (QST) using only global rotations of the spin system, whose performance is shown in detail.

Chemical and morphological characterization of sugarcane bagasse submitted to a delignification process for enhanced enzymatic digestibility.

Background: In recent years, biorefining of lignocellulosic biomass to produce multi-products such as ethanol and other biomaterials has become a dynamic research area. Pretreatment technologies that fractionate sugarcane bagasse are essential for the successful use of this feedstock in ethanol production. In this paper, we investigate modifications in the morphology and chemical composition of sugarcane bagasse submitted to a two-step treatment, using diluted acid followed by a delignification process with increasing sodium hydroxide concentrations.

The mobility of chondroitin sulfate in articular and artificial cartilage characterized by 13C magic-angle spinning NMR spectroscopy.

We have studied the molecular dynamics of one of the major macromolecules in articular cartilage, chondroitin sulfate. Applying (13)C high-resolution magic-angle spinning NMR techniques, the NMR signals of all rigid macromolecules in cartilage can be suppressed, allowing the exclusive detection of the highly mobile chondroitin sulfate. The technique is also used to detect the chondroitin sulfate in artificial tissue-engineered cartilage.