Marginal integrity and physicomechanical properties of a thermoviscous and regular bulk-fill resin composites.

Objectives: To evaluate the marginal integrity (MI%) and to characterize specific properties of a thermoviscous bulk-fill resin composite, two regular bulk-fill resin composites, and a non-bulk-fill resin composite.

Materials And Methods: VisCalor bulk (VBF), Filtek One Bulk Fill (OBF), and Aura Bulk Fill (ABF) were evaluated. Filtek Z250 XT (ZXT) was used as non-bulk-fill control.

Brazil nut-enriched diet modulates bone mineral density and body composition in an experimental model of chronic kidney disease.

Objective: This study investigates the effects of a Brazil nut-enriched diet on body composition and bone parameters in CKD animal model.

Methods: Male Wistar rats were assigned to the following groups: Sham (n=8), Nx (n=6), nephrectomized rats, and NxBN (n=6), nephrectomized rats and an enricheddiet with 5% Brazil nut. Body composition parameters were obtained by dual-energy X- ray absorptiometry (DXA).

Influence of Specimen Dimension, Water Immersion Protocol, and Surface Roughness on Water Sorption and Solubility of Resin-Based Restorative Materials.

The evaluation of water sorption and solubility is pivotal for the development of new resin-based restorative materials with the potential for clinical application. The purpose of the present study was to evaluate the influence of the specimen dimension, water immersion protocol, and surface roughness on the water sorption and solubility of three resin-based restorative materials. Disk-shaped specimens of 15 mm × 1 mm, 10 mm × 1 mm, and 6 mm × 1 mm were produced with a composite resin (Z100), a resin cement (RelyX ARC), and an adhesive system (Single Bond 2-SB2).

Evolution of roughness and optical properties of resin composites submitted to whitening toothpastes-cigarette smoking cycling.

Purpose: To evaluate the effect of cycling whitening toothpaste with cigarette smoking (WTCS) on the evolution of roughness, color, translucency, and gloss of microfilled, microhybrid, and nanofilled resin composites.

Methods: 15 specimens of Durafill - DVS, Empress Direct - ED, and Z350 - FZ were divided into three groups according to the toothpastes:: conventional, control group, (Colgate - C) and Whitening (Colgate Luminous White - CW and Oral B 3D White - OW) and roughness, color, translucency, and gloss were evaluated before and after the specimens were submitted to WTCS for 8 weeks. Data were analyzed by two-way ANOVA, 3-way repeated measures ANOVA, and Tukey HSD post hoc test (α= 0.

Early Treatment with Pegylated Interferon Lambda for Covid-19.

Background: The efficacy of a single dose of pegylated interferon lambda in preventing clinical events among outpatients with acute symptomatic coronavirus disease 2019 (Covid-19) is unclear.

Methods: We conducted a randomized, controlled, adaptive platform trial involving predominantly vaccinated adults with severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection in Brazil and Canada. Outpatients who presented with an acute clinical condition consistent with Covid-19 within 7 days after the onset of symptoms received either pegylated interferon lambda (single subcutaneous injection, 180 μg) or placebo (single injection or oral).

Dentine biomodification by sulphonamides pre-treatment: bond strength, proteolytic inhibition, and antimicrobial activity.

We evaluated the effects of dentine biomodification after pre-treatment with two sulphonamide carbonic anhydrase inhibitors (CAIs) of the N-[4-sulphamoylphenethylcarbamoyl]benzenesulphonamide type, investigating matrix metalloproteases activity, resin-dentine micro tensile bond strength, dentine surface wettability, and antimicrobial activities. Ninety-five sound-extracted human molars were selected for the study. Inhibitory effects were evaluated by gelatinase and collagenase activity tests and collagen degradation FT-IR spectroscopic analysis.

The influence of methodology on the comparison of cytotoxicity of total-etch and self-etch adhesive systems.

Objectives: The present study aimed to compare the in vitro cytocompatibility of two etch-and-rinse (Adper Scothbond, Optibond) and two self-etch (Clearfill SE Bond and Single Bond Universal) dental adhesives through a dentin-barrier model with human pulp fibroblasts.

Methods: Human fibroblasts were placed on a plastic device containing 500μm human dentin discs treated with each adhesive or without treatment (control). Other groups were directly exposed to media conditioned with adhesive samples according to ISO 10993-5:2009.

Glass fiber posts relining: can composite opacity influence retention to root canal dentin?

This study aimed at evaluating the influence of glass-fiber post (GFP) relining with composites of different opacities on resin cement layer thickness (CLT), bond strength (BS) to root dentin, and resin cement degree of conversion (DC%). Standardized roots of 52 bovine incisors had their canals prepared and were distributed into 4 groups (n = 10 for CLT and BS; n = 3 for DC%) according to the post used: WP3 (Control)-Whitepost DC3; groups DE, EN and TR-Whitepost DC0.5 relined, respectively, with dentin, enamel, and translucent shade composites.

Characterization and Anti-Caries Effect of an Experimental Adhesive Containing Natural Antimicrobial Agents.

Purpose: To characterize experimental adhesives containing natural antimicrobial agents (proanthocyanidins, apigenin, tt-farnesol) in the primer and to evaluate their anti-caries effect.

Materials And Methods: Natural agents were incorporated in the primer of an experimental adhesive: 4.5% proanthocyanidins (PA), 1 mM apigenin (API), 1 mM apigenin + 5 mM tt-farnesol (API + FAR), and primer without antimicrobial agent (control).

Biochemical features and early adhesion of marine Candida parapsilosis strains on high-density polyethylene.

Aims: Plastic debris are constantly released into oceans where, due to weathering processes, they suffer fragmentation into micro- and nanoplastics. Diverse microbes often colonize these persisting fragments, contributing to their degradation. However, there are scarce reports regarding the biofilm formation of eukaryotic decomposing microorganisms on plastics.

Fabrication and characterization of low-shrinkage dental composites containing montmorillonite nanoclay.

Dental composites are aesthetic materials widely used in Dentistry for replacing hard dental tissues lost due to caries or traumas. The aim of this study was to fabricate low-shrinkage dental composite charged with nanoclay fillers (montmorillonite Cloisite®-MMT) and evaluate their cytotoxicity and physicomechanical properties. Four dental composites were produced from the same organic matrix: Bis-GMA/TEGDMA (30 wt.

Effect of Early Treatment With Hydroxychloroquine or Lopinavir and Ritonavir on Risk of Hospitalization Among Patients With COVID-19: The TOGETHER Randomized Clinical Trial.

Importance: Data on the efficacy of hydroxychloroquine or lopinavir-ritonavir for the treatment of high-risk outpatients with COVID-19 in developing countries are needed.

Objective: To determine whether hydroxychloroquine or lopinavir-ritonavir reduces hospitalization among high-risk patients with early symptomatic COVID-19 in an outpatient setting.

Design, Setting, And Participants: This randomized clinical trial was conducted in Brazil.

Biofilms of Pseudomonas and Lysinibacillus Marine Strains on High-Density Polyethylene.

Environmental pollution by plastic debris is estimated on a scale of 100 million metric tons, a portion of which is fragmented into micro- and nanoplastics. These fragments are often colonized by bacterial species in marine environments, possibly contributing to the biodegradation of such materials. However, further investigations are necessary to determine the impact of abiotic polymer weathering on biofilm adhesion, as well as the specific biofilm formation strategies employed by marine isolates.

Adaption of microbial communities to the hostile environment in the Doce River after the collapse of two iron ore tailing dams.

In November 2015, two iron ore tailing dams collapsed in the city of Mariana, Brazil. The dams' collapse generated a wave of approximately 50 million m of a mixture of mining waste and water. It was a major environmental tragedy in Brazilian history, which damaged rivers, and cities 660 km away in the Doce River basin until it reached the ocean coast.

Effects of a biomimetic analog-based experimental bonding system on caries-affected and sound dentin.

This study compared the ultrastructure, chemical composition, and proteases activity (PA) of sound (SD) and caries-affected dentin (CAD) in the dentin hybrid layer after using an experimental bonding system containing pyromellitic dianhydride glycerol methacrylate and biomimetic analogs. The bonding system used a three step and a total-etch procedure. Polyacrylic acid (5%) and sodium trimetaphosphate (5%) were added to the primer and monocalcium phosphate monohydrate (9%), beta-tricalcium phosphate (10.

Characterization and Antibacterial Effect of an Experimental Adhesive Containing Different Concentrations of Proanthocyanidin.

Purpose: To evaluate the degree of conversion (DC%), water sorption (Sp), solubility (Sl), dentin bond strength (μTBS) (immediate and after 12 months of storage), and the antibacterial effect of an experimental adhesive containing different concentrations (%) of proanthocyanidin (PA): 0, 1%, 2%, 4.5%, and 6% (PA0, PA1%, PA2%, PA4.5% and PA6%, respectively).

Remineralizing potential of dental composites containing silanized silica-hydroxyapatite (Si-HAp) nanoporous particles charged with sodium fluoride (NaF).

Objectives: To synthesize and evaluate the enamel remineralizing potential of dental composites containing silanized silica-hydroxyapatite (Si-HAp) nanoporous particles charged with sodium fluoride (NaF).

Methods: Si-HAp particles were synthesized using a solid-state method. Dental composites were prepared by incorporating 70 wt.

Bond stability of conventional adhesive system with MMP inhibitors to superficial and deep dentin.

Purpose: To evaluate the microshear bond strength (μSBS) to deep (DD) or superficial (SD) dentin (μSBS) overtime, nanoleakage (AG%), degree of conversion (DC%), water sorption (WSp), and solubility (WSl) of an adhesive system [Adper Single Bond 2(ASB)] containing matrix metalloproteinases (MMP) inhibitors [GM1489 (ASB-GM), Batimastat (ASB-BAT), or Chlorhexidine diacetate (ASB-CHX)]. ASB without inhibitor was used as control (CONTROL).

Materials And Methods: WSp and WSL were calculated based on ISO4049.

Development and characterization of biological bovine dentin posts.

This study aimed at evaluating the use of biological dentin post (BDP), achieved by milling bovine root, through the analyses of mechanical and optical properties. BDPs were compared to a glass fiber post (GFP) in the following tests (n = 10): a) elastic modulus (E) and flexural resistance (σ) by three point bending test; b) fracture resistance (FR) by compressive load at 45° and failure pattern; c) light transmitting (LT) ability and their influence on the resin cement's degree of conversion (DC%); d) bond strength (BS) by push-out test and failure pattern. Bovine teeth were decoronated and root length was standardized at 14 mm.

Characterization of low-shrinkage dental composites containing methacrylethyl-polyhedral oligomeric silsesquioxane (ME-POSS).

The aim of this study was to characterize low-shrinkage dental composites containing methacrylethyl-polyhedral oligomeric silsesquioxane (ME-POSS). Four experimental composites were manufactured, two of which contained organic matrixes of BisGMA-TEGDMA (70/30 wt% - BGC) and BisEMA-TEGDMA (80/20 wt% - BEC). The two other experimental composites replaced BisGMA and BisEMA with 25 wt% of ME-POSS (BGP and BEP).

Effect of a dentifrice containing nanohydroxyapatite on the roughness, color, lightness, and brightness of dental enamel subjected to a demineralization challenge.

The dental profession is still pursuing the most effective way to treat white-spot lesions in order to produce a sound and esthetically pleasing enamel surface. The aim of the present research was to evaluate in vitro the effects of a dentifrice with nanohydroxyapatite (nano-HAp) on the roughness, color, lightness, and brightness (gloss) of bovine enamel subjected to pH cycling. Twelve enamel discs prepared from bovine incisors were divided into 2 experimental groups: dentifrice with sodium fluoride (Colgate Total 12 Clean Mint) and dentifrice with nanoHAp (Megasonex).

The effects of non-thermal plasma and conventional treatments on the bond strength of fiber posts to resin cement.

Objectives: This study compared the effect of hexamethyldisiloxane (HMDSO) and ammonia (NH) plasmas on the bond strength of resin cement to fiber posts with conventional treatments.

Materials And Methods: Sixty-five fiber posts were divided into 5 groups: Control (no surface treatment); HO (24% hydrogen peroxide for 1 min); Blasting (blasting with aluminum oxide for 30 sec); NH (NH plasma treatment for 3 min); HMDSO (HMDSO plasma treatment for 15 min). After the treatments, the Ambar adhesive (FGM Dental Products) was applied to the post surface ( = 10).

Effect of intra-oral aging on t→m phase transformation, microstructure, and mechanical properties of Y-TZP dental ceramics.

The aim of the present study was to evaluate the influence of intra-oral aging on the tetragonal-to-monoclinic (t→m) phase transformation of two Y-TZP dental ceramics - Lava Frame (Frame) and Lava Plus (Plus) - and determine the impact of this response on their microstructures and mechanical properties: flexural strength, Young's modulus, microhardness and fracture toughness. Standardized ceramic specimens were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and atomic force microscopy (AFM). After the baseline analysis, the specimens were attached to personalized intra-oral resin appliances and exposed to the oral cavity of 20 subjects for 60 days and then analyzed again.

Incorporation of Flaxseed Flour as a Dietary Source for ALA Increases Bone Density and Strength in Post-Partum Female Rats.

In women, bone mass undergoes changes during pregnancy and the postpartum period, which has a risk for subsequent development of osteoporosis. Thus, the present study aims to evaluate the effects of flaxseed flour in femur quality during post-weaning of dam rats. After weaning, the rats were divided into control (C, n = 7) and experimental (F, n = 7) groups treated with a diet containing 25 g of flaxseed flour in the lactating period and 15 g in the maintenance period.