Tip-enhanced photoluminescence (TEPL) microscopy allows for the correlation of scanning probe microscopic images and photoluminescent spectra at the nanoscale level in a similar way to tip-enhanced Raman scattering (TERS) microscopy. However, due to the higher cross-section of fluorescence compared to Raman scattering, the diffraction-limited background signal generated by far-field excitation is a limiting factor in the achievable spatial resolution of TEPL. Here, we demonstrate a way to overcome this drawback by using remote excitation TEPL (RE-TEPL).
View Article and Find Full Text PDFPhysisorption on hexagonal boron nitride (hBN) gained interest over the years thanks to its properties (chemically and thermally stable, insulating properties, etc.) and similarities to the well-known graphene. A recent study showed flat-on adsorption of several cationic thiacarbocyanine dyes on hBN with a tendency to form weakly coupled H- or I-type aggregates, while a zwitterionic thiacarbocyanine dye rather led to a tilted adsorption.
View Article and Find Full Text PDFElectrostatic interactions between the zeolite cavity and confined noble-metal nanoparticles govern the photophysical properties of these materials. A better understanding of these interactions can afford new perspectives in optoelectronics applications. We investigated this interplay by revealing the peculiar photophysical properties of Ag clusters embedded in nanosized faujasite zeolite structures.
View Article and Find Full Text PDFLead halide perovskites are promising candidates for high-performance light-emitting diodes (LEDs); however, their applicability is limited by their structural instability toward moisture. Although a deliberate addition of water to the precursor solution has recently been shown to improve the crystallinity and optical properties of perovskites, the corresponding thin films still do not exhibit a near-unity quantum yield. Herein, we report that the direct addition of a minute amount of water to post-treated formamidinium lead bromide (FAPbBr) nanocrystals (NCs) substantially enhances the stability while achieving a 95% photoluminescence quantum yield in a NC thin film.
View Article and Find Full Text PDFHerein, we describe a methodology to construct polycyclic pyrrolophenanthridones with an (amino)alkyl side chain that involves visible-light-induced decarboxylative radical addition for the intermolecular dearomatization of indoles and subsequent photoinduced C(sp)-X bond activation via photoexcited ketones for an intramolecular cyclization cascade. Carboxylic acids serve both as a radical source toward indole dearomatization and as reductants to initiate an electron transfer with photoexcited -acylindole derivatives in the reaction toward pyrrolophenantridone skeletons, which occurs under mild reaction conditions with good functional group tolerance.
View Article and Find Full Text PDFSingle dielectric microspheres can manipulate light focusing and collection to enhance optical interaction with surfaces. To demonstrate this principle, we experimentally investigate the enhancement of the Raman signal collected by a single dielectric microsphere, with a radius much larger than the exciting laser spot size, residing on the sample surface. The absolute microsphere-assisted Raman signal from a single graphene layer measured in air is more than a factor of two higher than that obtained with a high numerical aperture objective.
View Article and Find Full Text PDFZeolite confined silver clusters (AgCLs) have attracted extensive attention due to their remarkable luminescent properties, but the elucidation of the underlying photophysical processes and especially the excited-state dynamics remains a challenge. Herein, we investigate the bright photoluminescence of AgCLs confined in Linde Type A zeolites (LTA) by systematically varying the temperature (298-77 K) and co-cation composition (Li/Na) and examining their respective influence on the steady-state and time-resolved photoluminescence. The observed polychromatic emission of the tetrahedral Ag(HO) clusters ranges from orange to violet and three distinct emitting species are identified, corresponding to three long-lived triplet states populated consecutively and separated by a small energy barrier.
View Article and Find Full Text PDFDetection and size estimation of combustion-derived carbonaceous particles (CDCPs) are important to understand their toxicity. Size determination of individual nano- and microparticles (NMPs) based on scattered light is a straightforward method. However, detection and sizing of CDCPs in biological samples based on scattering alone are not possible due to the compositional heterogeneity of NMPs present in biological samples.
View Article and Find Full Text PDFAngew Chem Int Ed Engl
September 2022
Developing light-harvesting materials with broad spectral response is of fundamental importance in full-spectrum solar energy conversion. We found that, when a series of earth-abundant metal (Cu, Co, Ni and Fe) salts are dissolved in coordinating solvents uniformly dispersed nanodots (NDs) are formed rather than fully dissolving as molecular species. The previously unrecognized formation of this condensed state is ascribed to spontaneous aggregation of molecular transition-metal-complexes (TMCs) via weak intermolecular interactions, which results in redshifted and broadened absorption into the NIR region (200-1100 nm).
View Article and Find Full Text PDFOrganic materials have attracted considerable attention in nonlinear optical (NLO) applications as they have several advantages over inorganic materials, including high NLO response, and fast response time as well as low-cost and easy fabrication. Lithium-containing C (Li@C) is promising for NLO over other organic materials because of its strong NLO response proven by theoretical and experimental studies. However, the low purity of Li@C has been a bottleneck for applications in the fields of solar cells, electronics and optics.
View Article and Find Full Text PDFLSSmOrange is a fluorescent protein that exhibits a large energy gap between absorption and emission, which makes it a useful tool for multicolor bioimaging. This characteristic of LSSmOrange originates from excited-state proton transfer (ESPT): The neutral chromophore is predominantly present in the ground state while the bright fluorescence is emitted from the anionic excited state after ESPT. Interestingly, it was reported that this ESPT process follows bimodal dynamics, but its origin has not clearly been understood.
View Article and Find Full Text PDFFörster resonance energy transfer (FRET) between fluorescent proteins has become a common platform for designing genetically encoded biosensors. For live cell imaging, the acceptor-to-donor intensity ratio is most commonly used to readout FRET efficiency, which largely depends on the proximity between donor and acceptor. Here, we introduce an anisotropy-based mode of FRET detection (FADED: FRET-induced Angular Displacement Evaluation via Dim donor), which probes for relative orientation rather than proximity alteration.
View Article and Find Full Text PDFLead halide perovskites have attracted tremendous attention in photovoltaics due to their impressive optoelectronic properties. However, the poor stability of perovskite-based devices remains a bottleneck for further commercial development. Two-dimensional perovskites have great potential in optoelectronic devices, as they are much more stable than their three-dimensional counterparts and rapidly catching up in performance.
View Article and Find Full Text PDFCorrection for 'FRET-based intracellular investigation of nanoprodrugs toward highly efficient anticancer drug delivery' by Farsai Taemaitree et al., Nanoscale, 2020, 12, 16710-16715, DOI: 10.1039/D0NR04910G.
View Article and Find Full Text PDFDefects influence the properties of metal-organic frameworks (MOFs), such as their storage amount and the diffusion kinetics of gas molecules. However, the spatial distribution of defects is still poorly understood due to a lack of visualization methods. Here, we present a new method using nonlinear optics (NLO) that allows the visualization of defects within MOFs.
View Article and Find Full Text PDFLead-free double perovskites have great potential as stable and nontoxic optoelectronic materials. Recently, Cs AgBiBr has emerged as a promising material, with suboptimal photon-to-charge carrier conversion efficiency, yet well suited for high-energy photon-detection applications. Here, the optoelectronic and structural properties of pure Cs AgBiBr and alkali-metal-substituted (Cs Y ) AgBiBr (Y: Rb , K , Na ; x = 0.
View Article and Find Full Text PDFIn order to overcome unpredictable side-effects and increased cytotoxicity of conventional carrier-based anticancer drug delivery systems, several systems that consist exclusively of the pure drug (or prodrug) have been proposed. The behavior and dynamics of these systems after entering cancer cells are, however, still unknown, hindering their progress towards in vivo and clinical applications. Here, we report a comprehensive in cellulo study of carrier-free SN-38 nanoprodrugs (NPDs), previously developed by our group.
View Article and Find Full Text PDFBy simultaneous occlusion of rationally chosen dyes, emitting in the blue, green and red region of the electromagnetic spectrum, into the one-dimensional channels of a magnesium-aluminophosphate with AEL-zeolitic type structure, MgAPO-11, a solid-state system with efficient white light emission under UV excitation, was achieved. The dyes herein selected-acridine (AC), pyronin Y (PY), and hemicyanine LDS722-ensure overall a good match between their molecular sizes and the MgAPO-11 channel dimensions. The occlusion was carried out via the crystallization inclusion method, in a suitable proportion of the three dyes to render efficient white fluorescence systems by means of fine-tuned FRET (fluorescence resonance energy transfer) energy transfer processes.
View Article and Find Full Text PDFMethods Appl Fluoresc
February 2020
Metal clusters confined inside zeolite materials display remarkable luminescent properties, making them very suitable as potential alternative phosphors in white LED applications. However, up to date, only single-color emitters have been reported for luminescent metal-exchanged zeolites. In this study, we synthesized and characterized white emitting silver-sulfur zeolites, which show a remarkable color tunability upon the incorporation of silver species in highly luminescent sulfur-zeolites.
View Article and Find Full Text PDFBioluminescence resonance energy transfer (BRET) from an exceptionally bright luciferase, NanoLuc, to a fluorescent HaloTag ligand is gaining momentum to monitor molecular interactions. The recommended use of HaloTag618 ligand for the NanoLuc-HaloTag BRET pair is versatile for ensemble experiments due to their well-separated emission bands. However, this system is not applicable for single-cell BRET imaging because of its low BRET efficiency and in turn weak acceptor signals.
View Article and Find Full Text PDFRed or near-infrared (NIR) light responsive molecules have received much attention for biological and material applications because potentially harmful UV light for materials and cells is not required for the photochemical reactions. Although some molecular designs for photochromic molecules to increase the photosensitivity to red or NIR light have been reported, the strategies are limited to the extension of π-conjugation length and the utilization of charge transfer transition or energy and electron transfers. Triplet fusion is an attractive tool to cause chemical reactions by converting low-energy excitation light to high-energy upconversion light.
View Article and Find Full Text PDFWe report a simple method to control the end shape of silver nanowires by adding pure water in the conventional polyol synthesis. The use of 0.2-0.
View Article and Find Full Text PDFWe demonstrate layer-dependent electron transfer between core/shell PbS/CdS quantum dots (QDs) and layered MoS energy band gap engineering of both the donor (QDs) and the acceptor (MoS) components. We do this by (i) changing the size of the QD or (ii) by changing the number of layers of MoS, and each of these approaches alters the band gap and/or the donor-acceptor separation distance, thus providing a means of tuning the charge-transfer rate. We find the charge-transfer rate to be maximal for QDs of smallest size and for QDs combined with a 5-layer MoS or thicker.
View Article and Find Full Text PDFFluorescent conjugated polymers formulated in nanoparticles show attractive properties to be used as bioimaging probes. However, their fluorescence brightness is generally limited by quenching phenomena due to interchain aggregation in the confined nanoparticle space. In this work, branched conjugated polymer networks are investigated as a way to enhance the photoluminescence quantum yield of the resulting conjugated polymer nanoparticles (CPNs).
View Article and Find Full Text PDF