Plasma-Based Modification of Tin Halide Perovskite Interfaces for Photovoltaic Applications.

Tin halide perovskites represent the most suitable alternative to their lead-based counterparts for sustainable photovoltaics. One of the most important drawbacks of this class of materials is the intrinsic tendency of tin (II) to oxidize under certain conditions and as a consequence of aging. Here, we explore plasma processing to gently treat the surface of the tin perovskite films.

Correction: Influence of the carbazole moiety in self-assembling molecules as selective contacts in perovskite solar cells: interfacial charge transfer kinetics and solar-to-energy efficiency effects.

[This corrects the article DOI: 10.1039/D3NA00811H.].

One-Step Solution Deposition of Tin-Perovskite onto a Self-Assembled Monolayer with a DMSO-Free Solvent System.

We show for the first time DMSO-free tin-based perovskite solar cells with a self-assembled hole selective contact (MeO-2PACz). Our method provides reproducible and hysteresis-free devices with MeO-2PACz, having the best device PCE of 5.8 % with a of 638 mV.

Monodentate versus Bidentate Anchoring Groups in Self-Assembling Molecules (SAMs) for Robust p-i-n Perovskite Solar Cells.

Current improvement in perovskite solar cells (PSCs) has been achieved by interface engineering and fine-tuning of charge-selective contacts. In this work, we report three novel molecules that can form self-assembled layers (SAMs) as an alternative to the most commonly used p-type contact material, PTAA. Two of these molecules have bidentate anchoring groups (MC-54 and MC-55), while the last one is monodentate (MC-45).

Influence of the carbazole moiety in self-assembling molecules as selective contacts in perovskite solar cells: interfacial charge transfer kinetics and solar-to-energy efficiency effects.

The use of self-assembled molecules (SAMs) as hole transport materials (HTMs) in p-i-n perovskite solar cells (iPSCs) has triggered widespread research due to their relatively easy synthetic methods, suitable energy level alignment with the perovskite material and the suppression of chemical defects. Herein, three new SAMs have been designed and synthesised based on a carbazole core moiety and modified functional groups through an efficient synthetic protocol. The SAMs have been used to understand the SAM/perovskite interface interactions and establish the relationship between the SAM molecular structure and the resulting performance of the perovskite-based devices.

How Halide Alloying Influences the Optoelectronic Quality in Tin-Halide Perovskite Solar Absorbers.

Halide alloying in tin-based perovskites allows for photostable bandgap tuning between 1.3 and 2.2 eV.

Managing Excess Lead Iodide with Functionalized Oxo-Graphene Nanosheets for Stable Perovskite Solar Cells.

Stability issues could prevent lead halide perovskite solar cells (PSCs) from commercialization despite it having a comparable power conversion efficiency (PCE) to silicon solar cells. Overcoming drawbacks affecting their long-term stability is gaining incremental importance. Excess lead iodide (PbI ) causes perovskite degradation, although it aids in crystal growth and defect passivation.

Defect Engineering to Achieve Photostable Wide Bandgap Metal Halide Perovskites.

Bandgap tuning is a crucial characteristic of metal-halide perovskites, with benchmark lead-iodide compounds having a bandgap of 1.6 eV. To increase the bandgap up to 2.

Enabling water-free PEDOT as hole selective layer in lead-free tin perovskite solar cells.

Metal halide perovskites are set to revolutionise photovoltaic energy harvesting owing to an unmatched combination of high efficiency and low fabrication costs. However, to improve the sustainability of this technology, replacing lead with less toxic tin is highly desired. Tin halide perovskites are approaching 15% in power conversion efficiency (PCE), mainly employing PEDOT:PSS as a hole-selective layer.

Pyridine Controlled Tin Perovskite Crystallization.

Controlling the crystallization of perovskite in a thin film is essential in making solar cells. Processing tin-based perovskite films from solution is challenging because of the uncontrollable faster crystallization of tin than the most used lead perovskite. The best performing devices are prepared by depositing perovskite from dimethyl sulfoxide because it slows down the assembly of the tin-iodine network that forms perovskite.

Role of Terminal Group Position in Triphenylamine-Based Self-Assembled Hole-Selective Molecules in Perovskite Solar Cells.

The application of self-assembled molecules (SAMs) as a charge selective layer in perovskite solar cells has gained tremendous attention. As a result, highly efficient and stable devices have been released with stand-alone SAMs binding ITO substrates. However, further structural understanding of the effect of SAM in perovskite solar cells (PSCs) is required.

Self-assembled Zn phthalocyanine as a robust p-type selective contact in perovskite solar cells.

The use of self-assembled monolayers (SAMs) as selective charge extracting layers in perovskite solar cells is a great approach to replace the commonly used charge selective contacts, as they can easily modify the interface to enhance the final solar cell performance. Here, we report a novel synthetic approach of the commonly known zinc phtalocyanine (ZnPc) molecule TT1, widely employed in dye-sensitized solar cells and previously used in perovskite solar cells. TT1 is used as a p-type selective contact, and it demonstrates its ability to form SAM on top of the indium tin oxide (ITO) transparent electrode, obtaining higher efficiencies compared to Pedot:PSS based perovskite solar cells.

Supramolecular Coordination of Pb Defects in Hybrid Lead Halide Perovskite Films Using Truxene Derivatives as Lewis Base Interlayers.

Truxene derivatives, due to their molecular structure and properties, are good candidates for the passivation of defects when deposited onto hybrid lead halide perovskite thin films. Moreover, their semiconductor characteristics can be tailored through the modification of their chemical structure, which allows-upon light irradiation- the interfacial charge transfer between the perovskite film and the truxene molecules. In this work, we analysed the use of the molecules as surface passivation agents and their use in complete functional solar cells.

Polypyrrole/multi-walled carbon nanotube composite for the solid phase extraction of lead(II) in water samples.

A multi-walled carbon nanotubes-polypyrrole conducting polymer nanocomposite has been synthesized, characterized and used for the separation and preconcentration of lead at trace levels in water samples prior to its flame atomic absorption spectrometric detection. The analytical parameters like pH, sample volume, eluent, sample flow rate that were affected the retentions of lead(II) on the new nanocomposite were optimized. Matrix effects were also investigated.