Merits of ozonation and catalytic ozonation pre-treatment in the algal treatment of pulp and paper mill effluents.

Since the performance of algal treatment for pulp mill effluent decreases with increasing color intensity and AOX content, which mainly originate from the chlorine bleaching of Kraft pulp, the separated CEH bleaching effluent was pre-treated by both the conventional and the heterogeneous catalytic ozonation processes. An increase in the BOD(5)/COD ratio from 0.11 to 0.

Algal treatment of pulp and paper industry wastewaters in SBR systems.

Highly colored and highly polluted pulp and paper industry wastewaters are proposed to be treated by using algae in sequential batch reactors (SBR). Results of batch studies revealed that up to 74% COD; 74% color removal could be attained in about 40 days of incubation. From the preliminary SBR experiments, filling period was found to be a critical step affecting the overall efficiency when mixing and aeration is applied during filling.

Effectiveness of algae in the treatment of a wood-based pulp and paper industry wastewater.

In this study, the ability of algae to treat a wood-based pulp and paper industry wastewater was investigated. Tests were performed in batch reactors seeded with a mixed culture of algae. Under different lighting and initial wastewater strength conditions, changes in COD, AOX and color contents of reactors were followed with time.

Improvement of primary settling performance with activated sludge.

In biological treatment plants employing activated sludge processes, it is possible to recirculate some portion of the waste activated sludge that is not sent to the aeration basin, to the inlet of the primary sedimentation tanks. But in the literature there is no detailed information about the conditions, ratios and the characteristics of the waste sludge that can be recirculated back. However, depending on its settling characteristics, the addition of waste activated sludge to raw wastewater may improve primary settling.