Publications by authors named "Dzmitry Zaitsau"

In this study, we determined the enthalpies of vaporisation for a suitable set of molecular and ionic liquids using modern techniques for vapour pressure measurements, such as the quartz crystal microbalance, thermogravimetric analysis (TGA), and gas chromatographic methods. This enabled us to measure reasonable vapour pressures, avoiding the problem of the decomposition of the ionic liquids at high temperatures. The enthalpies of vaporisation could be further analysed by applying the well-known "group contribution" methods for molecular liquids and the "centerpiece" method for ionic liquids.

View Article and Find Full Text PDF

Volatile metal β-diketonates are of interest from both practical and theoretical perspectives (manufacturing of film materials, catalysis, and the nature of metal-ligand bonding). Knowledge of their reliable thermochemical properties is essential for effective applications. However, there is an unacceptable scattering of the available data on the enthalpies of formation.

View Article and Find Full Text PDF

We show that the carboxyl-functionalized ionic liquid 1-(carboxymethyl)pyridinium bis(trifluoromethylsulfonyl)imide [HOOC-CH -py][NTf ] exhibits three types of hydrogen bonding: the expected single hydrogen bonds between cation and anion, and, surprisingly, single and double hydrogen bonds between the cations, despite the repulsive Coulomb forces between the ions of like charge. Combining X-ray crystallography, differential scanning calorimetry, IR spectroscopy, thermodynamic methods and DFT calculations allows the analysis and characterization of all types of hydrogen bonding present in the solid, liquid and gaseous states of the ionic liquid (IL). We find doubly hydrogen bonded cationic dimers (c =c ) in the crystalline phase.

View Article and Find Full Text PDF

Ionic liquids (ILs) are recognized as an environmentally friendly alternative to replacing volatile molecular solvents. Knowledge of vaporization thermodynamics is crucial for practical applications. The vaporization thermodynamics of five ionic liquids containing a pyridinium cation and the [NTf] anion were studied using a quartz crystal microbalance.

View Article and Find Full Text PDF

The paradigm of supramolecular chemistry relies on the delicate balance of noncovalent forces. Here we present a systematic approach for controlling the structural versatility of halide salts by the nature of hydrogen bonding interactions. We synthesized halide salts with hydroxy-functionalized pyridinium cations [HOC Py] (n=2, 3, 4) and chloride, bromide and iodide anions, which are typically used as precursor material for synthesizing ionic liquids by anion metathesis reaction.

View Article and Find Full Text PDF

Combustion calorimetry is the predominant method for determination of enthalpies of formation for organic compounds. Both initial and final states of the calorimeter deviate significantly from the standard conditions. Correction of the obtained results to the standard state must be applied as accurately as possible to determine the combustion energy with an acceptable uncertainty, which is typically a few hundredths of a percent.

View Article and Find Full Text PDF

Ionic liquids are described by a delicate balance of Coulomb interaction, hydrogen bonding and dispersion forces. Dissecting the different types of interactions from thermodynamic properties is still a challenge. Here, we show that comparison of vaporization enthalpies of tetra-alkyl-ammonium ionic liquids with bis(trifluoromethylsulfonyl)imide [NTf] anions and the related molecular liquids, trialkylamines, allows for determining dispersion interactions in the gas phase ion-pairs.

View Article and Find Full Text PDF

Precursor solubility is a crucial factor in industrial applications, dominating the outcome of reactions and purification steps. The outcome and success of thermodynamic modelling of this industrially important property with equations of states, such as Perturbed-Chain Statistical Associating Fluid Theory (PC-SAFT), vastly depends on the quality of the pure-component parameters. The pure-component parameters for low-volatile compounds such as ionic liquids (ILs) have been commonly estimated using mixture properties, e.

View Article and Find Full Text PDF

S-alkyltetrahydrothiophenium, [C THT] bis(trifluorosulfonyl)imide, [NTf ] room temperature ionic liquids (ILs) and tetraphenylborate, [BPh ] salts with alkyl chain lengths from C to C have been prepared. The ILs and salts were characterized and their purity verified by H- and C-nuclear magnetic resonance, elemental analysis, ion chromatography, Karl-Fischer titration, single crystal X-ray diffraction as well as thermogravimetric analysis. The experimentally determined density and viscosity decrease with increasing temperature.

View Article and Find Full Text PDF

A series of nine different known ionic liquids or low melting salts was synthesised and purified. They are composed of the [NTf ] (bis(trifluoromethane)sulfonimide), [OTf] (trifluoro-methane-sulfonate), or [B(CN) ] (tetracyanidoborate) anion and [Ph P] (tetraphenylphosphonium), [Ph BzP] (triphenylbenzyl phosphonium), [ Bu P] (tetra- butylphosphonium), [ BuPh P] (tri-phenyl- butylphosphonium), [ Bu N] (tetra- butylammonium), or the [PPN] (bis(triphenylphosphine)iminium) cation. Precise vapour pressure data and enthalpies of vaporisation were measured using the Quartz Crystal Microbalance (QCM) method and evaluated.

View Article and Find Full Text PDF

The state-of-the-art unit operation for separation and purification of amino acids is still crystallization, which requires solubility data and melting properties of pure compounds. Since measuring solubility is time-consuming, prediction tools are desired. Further, melting properties are not yet available due to decomposition of amino acids upon slow heating.

View Article and Find Full Text PDF

We provide comprehensive understanding of "like-likes-like" charge attraction in hydroxy-functionalized ionic liquids (ILs) by means of infrared spectroscopy (IR), quantum chemistry and differential scanning calorimetry (DSC). We show that hydrogen bonding between cation and cation (c-c) is possible despite the repulsive forces between ions of like charge. Already at room temperature, the (c-c) hydrogen bonds can compete with the regular Coulomb-enhanced hydrogen bonds between cation and anion (c-a).

View Article and Find Full Text PDF

Heat capacities of the antiviral drug rimantadine hydrochloride in the crystalline state were measured by adiabatic calorimetry and differential scanning calorimetry in the temperature range from (7 to 453) K. A broad low-enthalpy solid-state phase anomaly was detected between (170 and 250) K. Thermodynamic functions for crystalline rimantadine hydrochloride were derived.

View Article and Find Full Text PDF

Melting properties (melting temperature, melting enthalpy and heat capacity difference between liquid and solid phase) of biomolecules are indispensable for natural and engineering sciences. The direct determination of these melting properties by using conventional calorimeters for biological compounds is often not possible due to decomposition during slow heating. In the current study this drawback is overcome by using fast scanning calorimetry (FSC) to directly measure the melting properties of five dipeptides (glycyl-glycine, glycyl-l-alanine, l-alanyl-glycine, l-alanyl-l-alanine and cyclo(l-alanyl-glycine)).

View Article and Find Full Text PDF

We present deuteron quadrupole coupling constants (DQCC) for hydroxyl-functionalized ionic liquids (ILs) in the crystalline or glassy states characterizing two types of hydrogen bonding: The regular Coulomb-enhanced hydrogen bonds between cation and anion (c-a), and the unusual hydrogen bonds between cation and cation (c-c), which are present despite repulsive Coulomb forces. We measure these sensitive probes of hydrogen bonding by means of solid-state NMR spectroscopy. The DQCCs of (c-a) ion pairs and (c-c) H-bonds are compared to those of salt bridges in supramolecular complexes and those present in molecular liquids.

View Article and Find Full Text PDF

The enthalpy of vaporization is mainly the amount of the energy needed for transferring quantities from the liquid into the gas phase. It simply describes the energy required to overcome the interaction energy between quantities if those evaporate as monomers as is the case for molecular liquids. The situation for ionic liquids (ILs) is more complex.

View Article and Find Full Text PDF

The quantification of hydrogen bonding and dispersion energies from vaporization enthalpies is a great challenge. Dissecting interaction energies is particularly difficult for ionic liquids (ILs), for which the composition of the different types of interactions is known neither for the liquid nor for the gas phase. In this study, we demonstrate the existence of ion pairs in the gas phase and dissect the interaction energies exclusively from measured vaporization enthalpies of different alkylated protic ILs (PILs) and aprotic ILs (AILs) and the molecular analogues of their cations.

View Article and Find Full Text PDF
Article Synopsis
  • This review summarizes over 50 years of studies on the thermodynamic properties of organic substances at the Chemistry Department of Belarusian State University.
  • It focuses on accurate measurements and prediction methods, such as calorimetry and group-contribution approaches, for various chemical substances.
  • The main goals include understanding the connection between molecular structure and thermodynamic properties, developing ways to estimate properties for substances without data, and supporting the advancement of energy-efficient technologies.
View Article and Find Full Text PDF

Three selenoether-functionalized ionic liquids (ILs) of N-[(phenylseleno)methylene]pyridinium (1), N-(methyl)- (2) and N-(butyl)-N'-[(phenylseleno)methylene]imidazolium (3) with bis(trifluoromethanesulfonyl)imide anions ([NTf2]) were prepared from pyridine, N-methylimidazole and N-butylimidazole with in situ obtained phenylselenomethyl chloride, followed by ion exchange to give the desired compounds. The crystal structures of the bromide and tetraphenylborate salts of the above cations (1-Br, 2-BPh4 and 3-BPh4) confirm the formation of the desired cations and indicate a multitude of different supramolecular interactions besides the dominating Coulomb interactions between the cations and anions. The vaporization enthalpies of the synthesized [NTf2]-containing ILs were determined by means of a quartz-crystal microbalance method (QCM) and their densities were measured with an oscillating U-tube.

View Article and Find Full Text PDF

The properties of melting are required for the prediction of solubility of solid compounds. Unfortunately, direct determination of the enthalpy of fusion and melting temperature by using conventional DSC or adiabatic calorimetry is often not possible for biological compounds due to decomposition during the measurement. To overcome this, fast scanning calorimetry (FSC) with scanning rates up to 2 × 10 K s was used in this work to measure the melting parameters for l-alanine and glycine.

View Article and Find Full Text PDF

Structure-property analyses of thermodynamic properties in chemical families of R-substituted benzamides, R-substituted benzoic acids, as well as R-substituted benzenes have been performed. The general linear interrelations for the vaporization enthalpies and the gas-phase enthalpies of formation between the chemical families under study have been established. These linear correlations provide a simple method for prediction of thermodynamic properties for benzenes with various combination of R-group substituents on the benzene ring.

View Article and Find Full Text PDF

Key properties for the use of ionic liquids as electrolytes in batteries are low viscosities, low vapor pressure and high vaporization enthalpies. Whereas the measurement of transport properties is well established, the determination of vaporization enthalpies of these extremely low volatile compounds is still a challenge. At a first glance both properties seem to describe different thermophysical phenomena.

View Article and Find Full Text PDF

It is well known that gas-phase experiments and computational methods point to the dominance of dispersion forces in the molecular association of hydrocarbons. Estimates or even quantification of these weak forces are complicated due to solvent effects in solution. The dissection of interaction energies and quantification of dispersion interactions is particularly challenging for polar systems such as ionic liquids (ILs) which are characterized by a subtle balance between Coulomb interactions, hydrogen bonding, and dispersion forces.

View Article and Find Full Text PDF

Imidazolium-based ionic liquids (ILs) with PF6(-) anions are considered as low-cost solvents for separation processes, but they exhibit restricted thermal stabilities. Reliable measurements of vaporization thermodynamics by conventional methods have failed. In this work, we applied a quartz-crystal microbalance method to determine for the first time the absolute vapor pressures for the [Cnmim][PF6] family, with n = 2, 4, 6, 8, and 10, in the temperature range 403-461 K.

View Article and Find Full Text PDF

The thermochemical properties available in the literature for adenine and cytosine are in disarray. A new condensed phase standard (p° = 0.1 MPa) molar enthalpy of formation at T = 298.

View Article and Find Full Text PDF