Potential biomedical applications of marine algae.

Functional components extracted from algal biomass are widely used as dietary and health supplements with a variety of applications in food science and technology. In contrast, the applications of algae in dermal-related products have received much less attention, despite that algae also possess high potential for the uses in anti-infection, anti-aging, skin-whitening, and skin tumor treatments. This review, therefore, focuses on integrating studies on algae pertinent to human skin care, health and therapy.

Enhanced polyhydroxyalkanoate production by mixed microbial culture with extended cultivation strategy.

Low biomass output is a crucial reason for low polyhydroxyalkanoate (PHA) production in mixed microbial cultures (MMCs) PHA process. In this research, an extended cultivation strategy was proposed to rapidly expand the biomass yield of PHA accumulating MMCs and conserve the PHA accumulating ability simultaneously. High PHA content of the cultivated MMCs of 71.

Current advances on fermentative biobutanol production using third generation feedstock.

Biobutanol is gaining more attention as a potential alternative to ethanol, and the demand for fermentative biobutanol production has renewed interest. The main challenge faced in biobutanol production is the availability of feedstock. Using conventional agricultural biomass as feedstock is controversial and less efficient, while microalgae, the third generation feedstock, are considered promising feedstock for biobutanol production due to their high growth rate and high carbohydrates content.

Photo-fermentative hydrogen production in a 4m baffled reactor: Effects of hydraulic retention time.

A 4m pilot-scale baffled continuous-flow photoreactor with four sequential chambers (#1-#4) was established and tested to evaluate its photo-fermentative hydrogen production from wastewater that contains (10g/L glucose using a functional consortium at 30°C, under light with an intensity of 3000±200lux with a hydraulic retention time (HRT) of 24-72h. The hydrogen production rate and the broth characteristics varied significantly in the flow direction. The hydrogen production rate was highest in chamber #1, and lower in chambers #2-#4 at an HRT of 72h, while the peak production rate shifted to the latter chambers as the HRT was shortened.

Photosynthetic hydrogen production by alginate immobilized bacterial consortium.

Photosynthetic hydrogen production from organic wastewaters using immobilized mixed culture with photosynthetic bacteria (PSB) was studied. A PSB consortium was immobilized by alginate matrix to form granules. The so-yielded granules exhibited minimal diffusional resistances to substrates and to illumination penetration but still produced more hydrogen from synthetic wastewater than the free cells at identical experimental conditions.

Fate of trace organic contaminants in oxic-settling-anoxic (OSA) process applied for biosolids reduction during wastewater treatment.

This study investigated the fate of trace organic contaminants (TrOCs) in an oxic-settling-anoxic (OSA) process consisting of a sequencing batch reactor (SBR) with external aerobic/anoxic and anoxic reactors. OSA did not negatively affect TrOC removal of the SBR. Generally, low TrOC removal was observed under anoxic and low substrate conditions, implicating the role of co-metabolism in TrOC biodegradation.

Enzyme hydrolysis kinetics of micro-grinded maize straws.

This study applied micro-grinding to disintegrate the maize straws and then use the micro-grinded straws of particle sizes particle size 53-61, 80-96 or 150-180μm, for subsequent enzyme hydrolysis tests. The reducing sugar productivity was increased with reducing particle size. A kinetic model considering product inhibition was developed as follows t=aln[S][S]-[P]+b[P], where S, P and t are the substrate, enzyme and hydrolysis time, respectively, and a and b are fitting parameters.

Pollution tolerant protozoa in polluted wetland.

This study for the first time confirmed that eight dominating protozoan species, Cryptomonas erosa, Euglena axyuris, Euglena caudate, Euglena gasterosteus, Euglena acus, Vorticella campanula, Vorticella convallaria and Epistylis lacustris, were the pollution tolerant species at chemical oxygen demand 54-104mg/L. These species cannot be used as indicator for clean water quality as commonly believed. The protozoa can be actively participating in the energy transfer chain between nano-planktonic and higher plants in polluted wetlands.

Enhanced performance of denitrifying sulfide removal process at high carbon to nitrogen ratios under micro-aerobic condition.

The success of denitrifying sulfide removal (DSR) processes, which simultaneously degrade sulfide, nitrate and organic carbon in the same reactor, counts on synergetic growths of autotrophic and heterotrophic denitrifiers. Feeding wastewaters at high C/N ratio would stimulate overgrowth of heterotrophic bacteria in the DSR reactor so deteriorating the growth of autotrophic denitrifiers. The DSR tests at C/N=1.

Influence of operational conditions on the stability of aerobic granules from the perspective of quorum sensing.

Integrated aerobic granules were first cultivated in two sequencing batch reactors (SBRs) (A1 and A2). Then, A1's influent organic loading rate (OLR) was changed from alternating to constant (cycling time was still 6 h), while A2's cycling time varied from 6 to 4 h (influent OLR strategy remained alternating). After 30-day operation since the manipulative alternations, granule breakage happened in two reactors at different operational stages, along with the decrease of granule intensity.

Photo-fermentative hydrogen production from crop residue: A mini review.

Photofermentative hydrogen production from crop residues, if feasible, can lead to complete conversion of organic substances to hydrogen (and carbon dioxide). This mini review lists the studies on photofermentative hydrogen production using crop residues as feedstock. Pretreatment methods, substrate structure, mechanism of photosynthetic bacteria growth and metabolism were discussed.

Microalgae biorefinery: High value products perspectives.

Microalgae have received much interest as a biofuel feedstock in response to the uprising energy crisis, climate change and depletion of natural sources. Development of microalgal biofuels from microalgae does not satisfy the economic feasibility of overwhelming capital investments and operations. Hence, high-value co-products have been produced through the extraction of a fraction of algae to improve the economics of a microalgae biorefinery.

Supramolecular Polymer Network-Mediated Self-Assembly of Semicrystalline Polymers with Excellent Crystalline Performance.

A novel application of supramolecular interactions within semicrystalline polymers, capable of self-assembling into supramolecular polymer networks via self-complementary multiple hydrogen-bonded complexes, is demonstrated for efficient construction of highly controlled self-organizing hierarchical structures to offer a direct, efficient nucleation pathway resulting in superior crystallization performance. Herein, a novel functionalized poly(ε-caprolactone) containing self-complementary sextuple hydrogen-bonded uracil-diamidopyridine (U-DPy) moieties is successfully developed and demonstrated excellent thermal and viscoelastic properties as well as high dynamic structural stability in the bulk state due to physical cross-linking created by reversible sextuple hydrogen bonding between U-DPy units. Due to the ability to vary the extent of the reversible network by tuning the U-DPy content, this newly developed material can be readily adjusted to obtain the desired crystalline products with specific characteristics.

Recent insights into biohydrogen production by microalgae - From biophotolysis to dark fermentation.

One of the best options to alleviate the problems associated with global warming and climate change is to reduce burning of fossil fuels and search for new alternative energy resources. In case of biodiesel and bioethanol production, the choice of feedstock and the process design influences the GHG emissions and appropriate methods need to be adapted. Hydrogen is a zero-carbon and energy dense alternative energy carrier with clean burning properties and biohydrogen production by microalgae can reduce production associated GHG emissions to a great extent.

Pyrosequencing reveals microbial community dynamics in integrated simultaneous desulfurization and denitrification process at different influent nitrate concentrations.

Integrated simultaneous desulfurization and denitrification (ISDD) process has proven to be feasible for the coremoval of sulfate, nitrate, and chemical oxygen demand (COD). In this study, we aimed to reveal the microbial community dynamics in the ISDD process with different influent nitrate (NO) concentrations. For all tested scenarios, full denitrification was accomplished while sulfate removal efficiency decreased along with increased influent NO concentrations.

Aerobic and anaerobic biosynthesis of nano-selenium for remediation of mercury contaminated soil.

Selenium (Se) nanoparticles are often synthesized by anaerobes. However, anaerobic bacteria cannot be directly applied for bioremediation of contaminated top soil which is generally aerobic. In this study, a selenite-reducing bacterium, Citrobacter freundii Y9, demonstrated high selenite reducing power and produced elemental nano-selenium nanoparticles (nano-Se) under both aerobic and anaerobic conditions.

Self-assembled supramolecular polymers with tailorable properties that enhance cell attachment and proliferation.

Unlabelled: Self-assembled supramolecular scaffolds, a combination of noncovalent interactions within a biocompatible polymer substrate, can be used for efficient construction of highly-controlled self-organizing hierarchical structures; these newly-developed biomaterials exhibit excellent mechanical properties, tunable surface hydrophilicity, low cytotoxicity and high biodegradability, making them highly attractive for tissue engineering and regenerative medicine applications. Herein, we demonstrate a novel supramolecular poly(ε-caprolactone) (PCL) containing self-complementary sextuple hydrogen-bonded uracil-diamidopyridine (U-DPy) moieties, which undergoes spontaneous self-assembly to form supramolecular polymer networks. Inclusion of various U-DPy contents enhanced the mechanical strength and viscosities of the resulting materials by up to two orders of magnitude compared to control PCL.

Self-Assembled Supramolecular Nanogels as a Safe and Effective Drug Delivery Vector for Cancer Therapy.

Simple construction and manipulation of low-molecular-weight supramolecular nanogels, based on the introduction of multiple hydrogen bonding interactions, with the desired physical properties to achieve effective and safe delivery of drugs for cancer therapy remain highly challenging. Herein, a novel supramolecular oligomer cytosine (Cy)-polypropylene glycol containing self-complementary multiple hydrogen-bonded Cy moieties is developed, which undergoes spontaneous self-assembly to form nanosized particles in an aqueous environment. Phase transitions and scattering studies confirm that the supramolecular nanogels can be readily tailored to obtain the desired phase-transition temperature and temperature-induced release of the anticancer drug doxorubicin (DOX).

Perspectives on the feasibility of using microalgae for industrial wastewater treatment.

Although microalgae can serve as an appropriate alternative feedstock for biofuel production, the high microalgal cultivation cost has been a major obstacle for commercializing such attempts. One of the feasible solution for cost reduction is to couple microalgal biofuel production system with wastewater treatment, as microalgae are known to effectively eliminate a variety of nutrients/pollutants in wastewater, such as nitrogen/phosphate, organic carbons, VFAs, pharmaceutical compounds, textile dye compounds, and heavy metals. This review aims to critically discuss the feasibility of microalgae-based wastewater treatment, including the strategies for strain selection, the effect of wastewater types, photobioreactor design, economic feasibility assessment, and other key issues that influence the treatment performance.

Thermodynamic parameters for adsorption equilibrium of heavy metals and dyes from wastewaters: Research updated.

The standard Gibbs free energy, enthalpy and entropy change data for adsorption equilibrium reported in biosorption literature during January 2013-May2016 were listed. Since the studied biosorption systems are all near-equilibrium processes, the enthalpy and entropy change data evaluated by fitting temperature-dependent free energy data using van Hoff's equation reveal a compensation artifact. Additional confusion is introduced with arbitrarily chosen adsorbate concentration unit in bulk solution that added free energy change of mixing into the reported free energy and enthalpy change data.

Mathematical modeling of simultaneous carbon-nitrogen-sulfur removal from industrial wastewater.

A mathematical model of carbon, nitrogen and sulfur removal (C-N-S) from industrial wastewater was constructed considering the interactions of sulfate-reducing bacteria (SRB), sulfide-oxidizing bacteria (SOB), nitrate-reducing bacteria (NRB), facultative bacteria (FB), and methane producing archaea (MPA). For the kinetic network, the bioconversion of C-N by heterotrophic denitrifiers (NO→NO→N), and that of C-S by SRB (SO→S) and SOB (S→S) was proposed and calibrated based on batch experimental data. The model closely predicted the profiles of nitrate, nitrite, sulfate, sulfide, lactate, acetate, methane and oxygen under both anaerobic and micro-aerobic conditions.

Microstructural strength deterioration of aerobic granule sludge under organic loading swap.

This study revealed that the gross indicators commonly adopted for monitoring the performance of aerobic granular sludge processes are not capable of probing the microstructural deterioration of granule interior upon organic loading swaps. These granules subjected to loading swaps retained their global characteristics: appearances, sizes and settling velocities, chemical oxygen demand (COD) and ammonia-nitrogen removal capacities. However, the granule interior strength, as determined by ultrasound method, was largely weakened upon COD switch-off and was not recovered in the subsequent COD re-supply stage.

Recent insights into the cell immobilization technology applied for dark fermentative hydrogen production.

The contribution and insights of the immobilization technology in the recent years with regards to the generation of (bio)hydrogen via dark fermentation have been reviewed. The types of immobilization practices, such as entrapment, encapsulation and adsorption, are discussed. Materials and carriers used for cell immobilization are also comprehensively surveyed.

Computer simulations of the interaction of human immunodeficiency virus (HIV) aspartic protease with spherical gold nanoparticles: implications in acquired immunodeficiency syndrome (AIDS).

The interaction of gold nanoparticles (AuNP) with human immune-deficiency virus aspartic protease (HIVPR) is modelled using a regime of molecular dynamics simulations. The simulations of the 'docking', first as a rigid-body complex, and eventually through flexible-fit analysis, creates 36 different complexes from four initial orientations of the nanoparticle strategically positioned around the surface of the enzyme. The structural deviations of the enzymes from the initial x-ray crystal structure during each docking simulation are assessed by comparative analysis of secondary structural elements, root mean square deviations, B-factors, interactive bonding energies, dihedral angles, radius of gyration (R g), circular dichroism (CD), volume occupied by C α , electrostatic potentials, solvation energies and hydrophobicities.

Treatment of domestic sewage with anoxic/oxic membrane-less microbial fuel cell with intermittent aeration.

An anoxic/oxic microbial fuel cell (MFC) reactor was applied to treat domestic sewage with intermittent aeration at cathodic chamber. The MFC yielded maximum power density of 2.05W/m(3) at current density 6.