Ultrasonic Propagation in Highly Attenuating Insulation Materials.

Experiments have been performed to demonstrate that ultrasound in the 100-400 kHz frequency range can be used to propagate signals through various types of industrial insulation. This is despite the fact that they are highly attenuating to ultrasonic signals due to scattering and viscoelastic effects. The experiments used a combination of piezocomposite transducers and pulse compression processing.

A simple, low-cost conductive composite material for 3D printing of electronic sensors.

3D printing technology can produce complex objects directly from computer aided digital designs. The technology has traditionally been used by large companies to produce fit and form concept prototypes ('rapid prototyping') before production. In recent years however there has been a move to adopt the technology as full-scale manufacturing solution.

High-resolution, air-coupled ultrasonic imaging of thin materials.

This paper describes the use of a focused air-coupled capacitance transducer combined with pulse compression techniques to form high-resolution images of thin materials in air. The focusing of the device is achieved by using an off-axis parabolic mirror. The lateral resolution of the focused transducer, operating over a bandwidth of 1.

Through-transmission imaging of solids in air using ultrasonic gas-jet waveguides.

An ultrasonic waveguide has been produced in air by using a gas jet. This uses the fact that a lower acoustic velocity can be produced within the jet, relative to the air surrounding it. The lower velocity is achieved by mixing carbon dioxide with air within the jet at a concentration that is a compromise between lower acoustic velocity and increasing attenuation.

Radiated fields of capacitive micromachined ultrasonic transducers in air.

This paper presents a study of the radiated ultrasonic fields of capacitive micromachined ultrasonic transducers (often referred to as cMUTs) in air. These fields were modeled theoretically and then compared to the experimental near-field amplitude variations and directivity patterns of square cMUTs. The good agreement between theory and experiment indicates that the devices can be approximated to plane piston radiators.