Cobalt Toxicity Induces Retinopathy and Optic Neuropathy in Mice.

Purpose: To explore the effect of cobalt toxicity on vision.

Methods: A total of 103 wild-type (WT) mice were injected with cobalt chloride by two routes in different concentrations: single intravenous (IV) high or low doses (total, n = 43); or daily repeated intraperitoneal (IP) high (three days) or low (28 days, 56 days) dose, and low-dose cobalt with added minocycline (56 days) (total, n = 60); 10 WT mice served as a control group. An additional group of 17 immunodeficient NOD scid gamma (NSG) mice were injected IV or IP with cobalt, and 10 NSG mice served as control.

Structure-Function Correlation in Cobalt-Induced Brain Toxicity.

Cobalt toxicity is difficult to detect and therefore often underdiagnosed. The aim of this study was to explore the pathophysiology of cobalt-induced oxidative stress in the brain and its impact on structure and function. Thirty-five wild-type C57B16 mice received intraperitoneal cobalt chloride injections: a single high dose with evaluations at 24, 48, and 72 h ( = 5, each) or daily low doses for 28 ( = 5) or 56 days ( = 15).

Extracting Superficial Scattering by Q-Sensing Technique.

Optical properties determine how light interacts with biological tissues. The current methods for measuring these optical properties are influenced by both deep and superficial skin layers. Polarization-based methods have been proposed in order to determine the influence of deep layer scattering.

Dependency of crossover point on absorption changes in bilayer diffusion reflection measurements.

Significance: A better understanding of diffusion reflection (DR) behavior may allow it to be used for more noninvasive applications, including the development of non-damaging techniques, especially for medical topical diagnosis and treatments.

Aim: For a bilayer opaque substance where the attenuation of the upper layer is larger than the attenuation of the lower layer, the DR crossover point ( ) is location where the photons coming from the bottom layer start affecting the DR. We aim to study the dependency of the on absorption changes in different layers for constant scattering and top layer thickness.

A Self-Calibrated Single Wavelength Biosensor for Measuring Oxygen Saturation.

Traditional methods for measuring blood oxygen use multiple wavelengths, which produce an intrinsic error due to ratiometric measurements. These methods assume that the absorption changes with the wavelength, but in fact the scattering changes as well and cannot be neglected. We found that if one measures in a specific angle around a cylindrical tissue, called the iso-pathlength (IPL) point, the reemitted light intensity is unaffected by the tissue's scattering.

Optical Method for Detection and Classification of Heavy Metal Contaminants in Water Using Iso-pathlength Point Characterization.

Water pollution caused by hazardous substances, particularly heavy metal (HM) ions, poses a threat to human health and the environment. Traditional methods for measuring HM in water are expensive and time-consuming and require extensive sample preparation. Therefore, developing robust, simple, and sensitive techniques for the detection and classification of HM is needed.

Bioimaging based on Poly(ethylenimine)-Coated Carbon Dots and Gold Nanoparticles for pH Sensing and Metal Enhanced Fluorescence.

When exposed to specific light wavelengths, carbon dots (CDs), which tend to be fluorescent, can emit colorful light. It provides them with a lot of adaptability for different applications including bioimaging, optoelectronics, and even environmental sensing. Poly(ethylenimine) (PEI) coated carbon dots (PEI-CDs) with a long emission wavelength were synthesized via the hydrothermal method.

Probing Polarity and pH Sensitivity of Carbon Dots in through Time-Resolved Fluorescence Analyses.

Intracellular monitoring of pH and polarity is crucial for understanding cellular processes and functions. This study employed pH- and polarity-sensitive nanomaterials such as carbon dots (CDs) for the intracellular sensing of pH, polarity, and viscosity using integrated time-resolved fluorescence anisotropy (FA) imaging (TR-FAIM) and fluorescence lifetime (FLT) imaging microscopy (FLIM), thereby enabling comprehensive characterization. The functional groups on the surface of CDs exhibit sensitivity to changes in the microenvironment, leading to variations in fluorescence intensity (FI) and FLT according to pH and polarity.

Detecting Contaminants in Water Based on Full Scattering Profiles within the Single Scattering Regime.

Clean water is essential for maintaining human health. To ensure clean water, it is important to use sensitive detection methods that can identify contaminants in real time. Most techniques do not rely on optical properties and require calibrating the system for each level of contamination.

Imaging the rotational mobility of carbon dot-gold nanoparticle conjugates using frequency domain wide-field time-resolved fluorescence anisotropy.

Significance: Wide-field measurements of time-resolved fluorescence anisotropy (TR-FA) provide pixel-by-pixel information about the rotational mobility of fluorophores, reflecting changes in the local microviscosity and other factors influencing the fluorophore's diffusional motion. These features offer promising potential in many research fields, including cellular imaging and biochemical sensing, as demonstrated by previous works. Nevertheless, imaging is still rarely investigated in general and in carbon dots (CDs) in particular.

Magnetite-Based Biosensors and Molecular Logic Gates: From Magnetite Synthesis to Application.

In the last few decades, point-of-care (POC) sensors have become increasingly important in the detection of various targets for the early diagnostics and treatment of diseases. Diverse nanomaterials are used as building blocks for the development of smart biosensors and magnetite nanoparticles (MNPs) are among them. The intrinsic properties of MNPs, such as their large surface area, chemical stability, ease of functionalization, high saturation magnetization, and more, mean they have great potential for use in biosensors.

Fluorescence attenuated by a thick scattering medium: Theory, simulations and experiments.

Fluorescence-based imaging has an enormous impact on our understanding of biological systems. However, in vivo fluorescence imaging is greatly influenced by tissue scattering. A better understanding of this dependence can improve the potential of noninvasive in vivo fluorescence imaging.

Recent Advances in the Spintronic Application of Carbon-Based Nanomaterials.

The term "carbon-based spintronics" mostly refers to the spin applications in carbon materials such as graphene, fullerene, carbon nitride, and carbon nanotubes. Carbon-based spintronics and their devices have undergone extraordinary development recently. The causes of spin relaxation and the characteristics of spin transport in carbon materials, namely for graphene and carbon nanotubes, have been the subject of several theoretical and experimental studies.

Trace Elements in Tears: Comparison of Rural and Urban Populations Using Particle Induced X-ray Emission.

We aimed to evaluate the types and concentrations of trace elements in tears of individuals living in urban and rural environments using particle induced X-ray emission (PIXE) and the possible association with exposure to air pollution and suggest a novel method for tear-based biomonitoring studies. This cross-sectional pilot study comprised 42 healthy subjects, 28 living in a rural area and 14 in an industrial city. Tears were collected with Schirmer paper and characterized by PIXE.

Noninvasive Nanodiamond Skin Permeation Profiling Using a Phase Analysis Method: Experiments.

Carbon-based nanoparticles (NPs) are widely used in nanotechnology. Among them, nanodiamonds (NDs) are suitable for biotechnology and are especially interesting for skin delivery and topical treatments. However, noninvasive detection of NDs within the different skin layers or analyzing their penetration ability is complicated due to the turbid nature of the tissue.

Design and Use of a Gold Nanoparticle-Carbon Dot Hybrid for a FLIM-Based IMPLICATION Nano Logic Gate.

The interest in nanomaterials resides in the fact that they can be used to create smaller, faster, and more portable systems. Nanotechnology is already transforming health care. Nanoparticles are being used by scientists to target malignancies, improve drug delivery systems, and improve medical imaging.

A Novel Facial Cream Based on Skin-penetrable Fibrillar Collagen Microparticles.

Background: Collagen protein plays a notable role maintaining firm skin. Topical creams containing collagen fibers are widely available, but their usefulness is questionable due to limited skin penetration. When applied in a cream, collagen does not penetrate the skin leaving the skin structure unaffected.

Magnetite Nanoparticles: Synthesis and Applications in Optics and Nanophotonics.

Magnetite nanoparticles with different surface coverages are of great interest for many applications due to their intrinsic magnetic properties, nanometer size, and definite surface morphology. Magnetite nanoparticles are widely used for different medical-biological applications while their usage in optics is not as widespread. In recent years, nanomagnetite suspensions, so-called magnetic ferrofluids, are applied in optics due to their magneto-optical properties.

Simultaneous Noninvasive Detection and Therapy of Atherosclerosis Using HDL Coated Gold Nanorods.

Cardiovascular disease (CVD) is a major cause of death and disability worldwide. A real need exists in the development of new, improved therapeutic methods for treating CVD, while major advances in nanotechnology have opened new avenues in this field. In this paper, we report the use of gold nanoparticles (GNPs) coated with high-density lipoprotein (HDL) (GNP-HDL) for the simultaneous detection and therapy of unstable plaques.

Classification of fluorescent anisotropy decay based on the distance approach in the frequency domain.

Frequency-domain (FD) fluorometry is a widely utilized tool to probe unique features of complex biological structures, which may serve medical diagnostic purposes. The conventional data analysis approaches used today to extract the fluorescence intensity or fluorescence anisotropy (FA) decay data suffer from several drawbacks and are inherently limited by the characteristics and complexity of the decay models. This paper presents the squared distance (D) technique, which categorized samples based on the direct frequency response data (FRD) of the FA decay.

Diffused reflectance measurements to detect tattoo ink location in skin using the crossover point.

Tattoos are highly trendy in western culture, but many people regret their tattoos for many reasons. It is essential to be aware of the ink location in advance to reduce the long and short-term side effects. In this study, diffuse reflectance (DR) experiments were conducted on two-layer (2L) tissue-mimicking phantoms, where ink was sandwiched between the layers.

Bottom layer absorption coefficients extraction from two-layer phantoms based on crossover point in diffuse reflectance.

Significance: Numerous optical imaging and spectroscopy techniques are used to study the tissue-optical properties; the majority of them are limited in information regarding the penetration depth. A simple, safe, easily applicable diagnostic technique is required to get deeper tissue information in a multilayer structure.

Aim: A fiber-based diffuse reflectance (DR) technique is used to extract and quantify the bottom layer absorption coefficients in two-layer (2L) tissue-mimicking solid phantoms.

Optimization of Gold Nanorod Features for the Enhanced Performance of Plasmonic Nanocavity Arrays.

Nanoplasmonic biosensors incorporating noble metal nanocavity arrays are widely used for the detection of various biomarkers. Gold nanorods (GNRs) have unique properties that can enhance spectroscopic detection capabilities of such nanocavity-based biosensors. However, the contribution of the physical properties of multiple GNRs to resonance enhancement of gold nanocavity arrays requires further characterization and elucidation.

Fluorophore spectroscopy in aqueous glycerol solution: the interactions of glycerol with the fluorophore.

A common perception exists that glycerol provides an inert-like environment modifying viscosity and index of refraction by its various concentrations in aqueous solution. Said perception is herein challenged by investigating the effects of the glycerol environment on the spectroscopic properties of fluorescein, as a representative fluorophore, using steady-state and time-resolved techniques and computational chemistry. Results strongly suggest that the fluorescence quantum yield, measured fluorescence lifetime (FLT), natural lifetime and calculated fluorescence lifetime are all highly sensitive to the presence of glycerol.