Dynamic Ion Gels from the Complex Coacervation of Oppositely Charged Poly(ionic liquid)s.

A cationic poly(ionic liquid) (PIL) with pendent butyl imidazolium cations and free bis(trifluoromethylsulfonyl)imide (TFSI) anions and an anionic PIL with pendent TFSI anions and free 1-butyl-3-methylimidazolium cations are synthesized by postpolymerization chemical modification and reversible addition-fragmentation chain-transfer radical copolymerization, respectively. Upon mixing solutions of these two PILs in acetone with stoichiometric amounts of ion pairs, ionic exchanges induce coacervation and, after solvent evaporation, lead to the formation of a dynamic ion gel (DIG) and the concomitant release of free [1-methyl-3-butyl imidazolium]TFSI ionic liquid (IL). A comparison of thermal (), ion conducting (σ), and viscoelastic (elastic moduli (')) properties for DIGs and their parent polyelectrolytes, as well as extracted and IL-doped DIGs, demonstrates the formation of ionic cross-links and the ability to easily produce polymer electrolytes with enhanced ionic conductivity (σ up to 4.

1,3,4,5-Tetrasubstituted Poly(1,2,3-triazolium) Obtained through Metal-Free AA+BB Polyaddition of a Diazide and an Activated Internal Dialkyne.

A tetra(ethylene glycol)-based 1,3,4,5-tetrasubstituted poly(1,2,3-triazolium) is synthesized in two steps including: i) the catalyst-free polyaddition of a diazide and an activated internal dialkyne and ii) the N-alkylation of the resulting 1,2,3-triazole groups. In order to provide detailed structure/properties correlations different analogs are also synthesized. First, parent poly(1,2,3-triazole)s are obtained via AA+BB polyaddition using copper(I)-catalyzed alkyne-azide cycloaddition or metal-free thermal alkyne-azide cycloaddition (TAAC).

Interface Manipulations Using Cross-Linked Underlayers and Surface-Active Diblock Copolymers to Extend Morphological Diversity in High-χ Diblock Copolymer Thin Films.

Top and bottom interfaces of high-χ cylinder-forming polystyrene--maltoheptaose (PSMH) diblock copolymer (BCP) thin films are manipulated using cross-linked copolymer underlayers and a fluorinated phase-preferential surface-active polymer (SAP) additive to direct the self-assembly (both morphology and orientation) of BCP microdomains into sub-10 nm patterns. A series of four photo-cross-linkable statistical copolymers with various contents of styrene, a 4-vinylbenzyl azide cross-linker, and a carbohydrate-based acrylamide are processed into 15 nm-thick cross-linked passivation layers on silicon substrates. A partially fluorinated analogue of the PSMH phase-preferential SAP additive is designed to tune the surface energy of the top interface.

Cross-linked polymer microparticles with tunable surface properties by the combination of suspension free radical copolymerization and Click chemistry.

We propose a general, versatile and broad in scope two-steps approach for the elaboration of cross-linked polymer microparticles (µPs) with tunable functionalities and surface properties. Surface-functionalized cross-linked polymer µPs with diameter in the 80 μm range are prepared by the combination of: 1) suspension free radical copolymerization of styrene, propargyl methacrylate and 1,6-hexanediol dimethacrylate, 2) subsequent covalent tethering of a variety of azide-functionalized moieties (i.e.

Viscoelasticity-Induced Onset of Slip at the Wall for Polymer Fluids.

The progressive onset of slip at the wall, which corresponds to a slip length increasing with the solicitation time before reaching a plateau, has been investigated for model viscoelastic polymer solutions, allowing one to vary the longest relaxation time while keeping constant solid-fluid interactions. A hydrodynamic model based on a Maxwell fluid and the classical Navier's hypothesis of a linear response for the friction stress at the interface fully accounts for the data. In the limit of the linear viscoelasticity of the fluid, we could postulate a Newtonian response for the interfacial friction coefficient, reflecting the local character of solid-liquid friction mechanisms.

Fast secondary dynamics for enhanced charge transport in polymerized ionic liquids.

Segmental dynamics is considered as a major factor governing ionic conductivity of polymerized ionic liquids (PILs), envisioned as potential electrolytes in fuel cells and batteries. Our dielectric studies performed in T-P thermodynamic space on ionene, composed of the positively charged polymer backbone and freely moving anions, indicate that other relaxation modes, completely ignored so far, can affect the charge transport in PILs as well. We found that fast mobility manifested by a secondary β process promotes segmental dynamics and thereby increases ionic conductivity making the studied material a first coupled PIL of superionic properties.

Structurally Related Scaling Behavior in Ionic Systems.

We examine the density scaling properties of two ionic materials, a classic aprotic low molecular weight ionic liquid, 1-butyl-3-methylimidazolium bis(perfluoroethylsulfonyl)imide ([BMIm][BETI]), and a polymeric ionic liquid, poly(3-methyl-1,2,3-triazolium bis(trifluoromethylsulfonyl)imide) (TPIL). Density scaling is known to apply rigorously to simple liquids lacking specific intermolecular associations such as hydrogen bonds. Previous work has found that ionic liquids conform to density scaling over limited ranges of temperature and pressure.

Exchange Process in the Dielectric Loss of Molecular and Macromolecular Ionic Conductors in the Interfacial Layers Formed by Electrode Polarization Effects.

Here we report a first analytical approach to determine the spectral dependence of the complex permittivity function of molecular and macromolecular ionic conductors in the interfacial layers formed by electrode polarization effects. We show that a previous model of electrode polarization effects that was successfully applied for describing the dielectric behavior of ionic liquids ( Serghei, A.; Tress, M.

Reusable Enzymatic Fiber Mats for Neurotoxin Remediation in Water.

Highly effective and reusable organophosphorus hydrolase (OPH)-loaded fiber mats have been fabricated that are capable of degrading toxic organophosphates (OPs) over a broad range of relevant concentrations (from 8 to 8250 ppm). The inherent fragility of enzymes, a major impediment in their incorporation into technologically relevant materials, was overcome while retaining their high catalytic efficiency, selectivity, and sensitivity via a random heteropolymers (RHP) approach. Kinetic analysis guides the design of polycaprolactone matrix morphology from films to fibers, facilitating substrate diffusion in the material.

Temperature-Controlled Slip of Polymer Melts on Ideal Substrates.

The temperature dependence of the hydrodynamic boundary condition between a polydimethylsiloxane melt and two different nonattractive surfaces made of either an octadecyltrichlorosilane self-assembled monolayer or a grafted layer of short polydimethylsiloxane chains has been characterized. We observe a slip length proportional to the fluid viscosity. The temperature dependence is deeply influenced by the surfaces.

A 1,2,3-triazolate lithium salt with ionic liquid properties at room temperature.

A triethylene glycol-based 1,2,3-triazolate lithium salt with ionic liquid properties at room temperature is synthesized in three steps including copper-catalysed cycloaddition between alkyne-functionalized monomethoxy-triethylene glycol and azidomethyl pivalate, followed by the deprotection of the methyl pivalate group and further lithiation of the 1H-1,2,3-triazole intermediate. The resulting lithium 1,2,3-triazolate is characterized by NMR spectroscopy, differential scanning calorimetry, thermogravimetric analysis, broadband dielectric spectroscopy, electrochemical impedance spectroscopy and cyclic voltamperometry. This approach provides new opportunities for the further development of highly functional molecular and macromolecular lithium salts.

Random heteropolymers preserve protein function in foreign environments.

The successful incorporation of active proteins into synthetic polymers could lead to a new class of materials with functions found only in living systems. However, proteins rarely function under the conditions suitable for polymer processing. On the basis of an analysis of trends in protein sequences and characteristic chemical patterns on protein surfaces, we designed four-monomer random heteropolymers to mimic intrinsically disordered proteins for protein solubilization and stabilization in non-native environments.

Friction of Polymers: from PDMS Melts to PDMS Elastomers.

The slip behavior of polydimethylsiloxane (PDMS) polymer melts flowing on weakly adsorbing surfaces made of short nonentangled PDMS chains densely end-grafted to silica has been characterized. For high enough shear rates, slip lengths proportional to the bulk fluid viscosity have been observed, in agreement with Navier's interfacial equation and demonstrating that the interfacial Navier's friction coefficient is a local quantity, independent of the polymer molecular weight. Comparing the interfacial shear stresses deduced from these measured slip lengths to available friction stress measured for cross-linked PDMS elastomers, we further demonstrate the local character of the friction coefficient and compare its value to the monomer-monomer friction.

Fluorinated Poly(ionic liquid) Diblock Copolymers Obtained by Cobalt-Mediated Radical Polymerization-Induced Self-Assembly.

Poly(ionic liquid)s (PILs) have attracted considerable attention as innovative single-ion solid polyelectrolytes (SPEs) in substitution to the more conventional electrolytes for a variety of electrochemical devices. Herein, we report the precise synthesis, characterization, and use as single-ion SPEs of a novel double PIL-based amphiphilic diblock copolymer (BCP), i.e.

Influence of grafting on the glass transition temperature of PS thin films.

We present an investigation of the effect of the interaction between a thin polystyrene film and its supporting substrate on its glass transition temperature ([Formula: see text]). We modulate this interaction by depositing the film on end-tethered polystyrene grafted layers of controlled molecular parameters. By comparing [Formula: see text] measurements versus film thickness for films deposited on different grafted layers and films deposited directly on a silicon substrate, we can conclude that there is no important effect of the film-subtrate interaction.

Enhanced Ionic Conductivity of a 1,2,3-Triazolium-Based Poly(siloxane ionic liquid) Homopolymer.

A 1,2,3-triazolium-based poly(siloxane ionic liquid) (PSIL) is synthesized by UV-triggered thiol-ene ligation between a poly[(mercaptopropyl)methylsiloxane] and a tailor-made vinyl-functionalized triethylene glycol-based 1,2,3-triazolium ionic liquid. The quantitative nature of the thiol-ene coupling is demonstrated by H and C NMR, whereas properties of this new PSIL are discussed based on solubility, size exclusion chromatography, differential scanning calorimetry, thermogravimetric analysis, and broadband dielectric spectroscopy measurements. Besides exhibiting low glass transition temperature ( = -62 °C) and high thermal stability ( = 284 °C), this new class of poly(1,2,3-triazolium) demonstrates the highest value of bulk anhydrous ionic conductivity reported to date for PILs (σ = 7 × 10 S cm at 30 °C).

1,2,3-Triazolium-Based Epoxy-Amine Networks: Ion-Conducting Polymer Electrolytes.

A diepoxy-functionalized 1,2,3-triazolium ionic liquid is synthesized in three steps and used in combination with a poly(propylene glycol) diamine to obtain ion-conducting epoxy-amine networks (EANs). The curing kinetics are followed by Fourier transform infrared spectroscopy, while the physical, mechanical, and ion-conducting properties of the resulting networks are studied by swelling experiments, differential scanning calorimetry, thermogravimetric analysis, dynamic mechanical thermal analysis, and broadband dielectric spectroscopy. The curing kinetics and thermomechanical properties of this system are relatively similar to those of conventional DGEBA- (bisphenol A diglycidyl ether)-based EANs with low glass transition temperature (Tg = -44 and -52 °C, respectively) characteristic of rubbery polymer networks.

Reprocessing and Recycling of Highly Cross-Linked Ion-Conducting Networks through Transalkylation Exchanges of C-N Bonds.

Exploiting exchangeable covalent bonds as dynamic cross-links recently afforded a new class of polymer materials coined as vitrimers. These permanent networks are insoluble and infusible, but the network topology can be reshuffled at high temperatures, thus enabling glasslike plastic deformation and reprocessing without depolymerization. We disclose herein the development of functional and high-value ion-conducting vitrimers that take inspiration from poly(ionic liquid)s.

Poly(vinyl ester 1,2,3-triazolium)s: a new member of the poly(ionic liquid)s family.

A vinyl ester monomer carrying a pendant 1,2,3-triazole group is synthesized in two steps and polymerized by cobalt-mediated radical polymerization. Subsequent alkylation with N-methyl bis[(trifluoromethyl)sulfonyl]imide affords the corresponding poly(vinyl ester 1,2,3-triazolium). This unprecedented example of poly(vinyl ester ionic liquid) exhibits an ionic conductivity of 9.

UV-Patterning of Ion Conducting Negative Tone Photoresists Using Azide-Functionalized Poly(Ionic Liquid)s.

The patterning of solid electrolytes that builds upon traditional fabrication of semiconductors is described. An azide-functionalized poly(1,2,3-triazolium ionic liquid) is used as an ion conducting negative tone photoresist. After UV-irradiation through an optical mask, micron-scaled, patterned, solid polyelectrolyte layers with controlled sizes and shapes are obtained.