Interface Engineering Induced by Low Ru Doping in Ni/Co@NC Derived from Ni-ZIF-67 for Enhanced Electrocatalytic Overall Water Splitting.

Electrochemical water splitting is a promising approach for hydrogen evolution reactions (HER); however, the oxygen evolution reaction (OER) remains a major bottleneck due to its high energy requirements. High-performance electrocatalysts capable of facilitating HER, OER, and overall water splitting (OWS) are highly needed to improve OER kinetics. In this work, we synthesized a trimetallic heterostructure of Ru, Ni, and Co incorporated into N-doped carbon (denoted as Ru/Ni/Co@NC) by first synthesizing Ni/Co@NC from Ni-ZIF-67 polyhedrons via high-temperature carbonization, followed by Ru doping using the galvanic replacement method.

RuCo@C Hollow Nanoprisms Derived from ZIF-67 for Enhanced Hydrogen and Oxygen Evolution Reactions.

Zeolitic imidazolate frameworks (ZIFs) are commonly used to create complex hollow structures for energy applications. This study presents a simple method to produce a novel hollow nanoprism Co@C hierarchical composite from ZIF-67 through high-temperature treatment at 800 °C. This composite serves as a platform for Ru nanoparticle deposition, forming RuCo@C hollow nanoprism (RuCo@C HNP).

Fabrication of rGO-Bridged TiO/g-CN Z-Scheme Nanocomposites via Pulsed Laser Ablation for Efficient Photocatalytic CO Reduction.

Highly efficient photocatalysts can be fabricated using favorable charge transfer nanocomposite channel structures. This study adopted pulsed laser ablation in liquid (PLAL) to obtain rGO-bridged TiO/g-CN (rGO-TiO/g-CN) photocatalytic Z-scheme without the need for noble metals. In addition to evaluating the resulting nanocomposite (comprising rGO nanosheets, TiO nanotubes, and g-CN nanosheets) CO reduction effectiveness, its chemical, morphological, structural, and optical characteristics were examined using various analytical techniques.

Understanding the Behavior of Supercapacitor Materials via Electrochemical Impedance Spectroscopy: A Review.

Energy harvesting and energy storage are two critical aspects of supporting the energy transition and sustainability. Many studies have been conducted to achieve excellent performance devices for these two purposes. As energy-storing devices, supercapacitors (SCs) have tremendous potential to be applied in several sectors.

Adsorptive removal of organic pollutants from aqueous solutions using novel GO/bentonite/MgFeAl-LTH nanocomposite.

The contamination of water with organic pollutants such as dyes and phenols is a serious environmental problem, requiring effective treatment methods. In the present study, a novel nanocomposite was synthesized by intercalating graphene oxide and bentonite clay into MgFeAl-layered triple hydroxide (GO/BENT/LTH), which was characterized using different techniques. The adsorption efficacy of the GO/BENT/LTH nanocomposite was assessed via the removal of two harmful organic water pollutants, namely methyl orange (MO) and 2-nitrophenol (2NP).

Carbonized Polymer Dots for Controlling Construction of MoS Flower-Like Nanospheres to Achieve High-Performance Li/Na Storage Devices.

Despite being one of the most promising materials in anode materials, molybdenum sulfide (MoS ) encounters certain obstacles, such as inadequate cycle stability, low conductivity, and unsatisfactory charge-discharge (CD) rate performance. In this study, a novel approach is employed to address the drawbacks of MoS . Carbon polymer dots (CPDs) are incorporated to prepare three-dimensional (3D) nanoflower-like spheres of MoS @CPDs through the self-assembly of MoS 2D nanosheets, followed by annealing at 700 °C.

An Up-to-Date Review on the Remediation of Dyes and Phenolic Compounds from Wastewaters Using Enzymes Immobilized on Emerging and Nanostructured Materials: Promises and Challenges.

Addressing the critical issue of water pollution, this review article emphasizes the need to remove hazardous dyes and phenolic compounds from wastewater. These pollutants pose severe risks due to their toxic, mutagenic, and carcinogenic properties. The study explores various techniques for the remediation of organic contaminants from wastewater, including an enzymatic approach.

Anticancer Activity of Au/CNT Nanocomposite Fabricated by Nanosecond Pulsed Laser Ablation Method on Colon and Cervical Cancer.

Gold nanoparticles (AuNPs) and carbon nanotubes (CNTs) are increasingly being investigated for cancer management due to their physicochemical properties, low toxicity, and biocompatibility. This study used an eco-friendly technique (laser synthesis) to fabricate AuNP and Au/CNT nanocomposites. AuNPs, Au/CNTs, and CNTs were tested as potential cancer nanotherapeutics on colorectal carcinoma cells (HCT-116) and cervical cancer cells (HeLa) using a 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT) assay.

Regulating the Electron Depletion Layer of Au/VO/Ag Thin Film Sensor for Breath Acetone as Potential Volatile Biomarker.

Human exhaled breath has been utilized to identify biomarkers for diseases such as diabetes and cancer. The existence of these illnesses is indicated by a rise in the level of acetone in the breath. The development of sensing devices capable of identifying the onset of lung cancer or diabetes is critical for the successful monitoring and treatment of these diseases.

2D/1D MoS /TiO Heterostructure Photocatalyst with a Switchable CO Reduction Product.

Regulating the transfer pathway of charge carriers in heterostructure photocatalysts is of great importance for selective CO photoreduction. Herein, the charge transfer pathway and in turn the redox potential succeeded to regulate in 2D MoS /1D TiO heterostructure by varying the light wavelength range. Several in situ measurements and experiments confirm that charge transfer follows either an S-scheme mechanism under simulated solar irradiation or a heterojunction approach under visible light illumination, elucidating the switchable property of the MoS /TiO heterostructure.

One-Step Hydrothermal Synthesis of Anatase TiO Nanotubes for Efficient Photocatalytic CO Reduction.

The hydrothermal dissolution-recrystallization process is a key step in the crystal structure of titania-based nanotubes and their composition. This work systematically studies the hydrothermal conditions for directly synthesizing anatase TiO nanotubes (ATNTs), which have not been deeply discussed elsewhere. It has been well-known that ATNTs can be synthesized by the calcination of titanate nanotubes.

Sunlight-driven activation of peroxymonosulfate by microwave synthesized ternary MoO/BiO/g-CN heterostructures for boosting tetracycline hydrochloride degradation.

Design of direct Z-scheme heterojunction photocatalyst is considered as an effective strategy to fully use the high redox potential photogenerated charge carriers. This work reports a novel method for investigating the photosynergistic performance of the Z-scheme MoO/BiO/g-CN (MBG) photocatalyst with peroxymonosulfate (PMS) for the solar degradation of tetracycline hydrochloride (TCH), a model of organic pollutants in wastewater. The results showed a better strategy to activate PMS via accelerating the redox cycle (Mo/Mo), which ultimately induces the successive generation of highly reactive oxygen species.

Sulfate radicals induced from peroxymonosulfate on electrochemically synthesized TiO-MoO heterostructure with Ti-O-Mo bond charge transfer pathway for potential organic pollutant removal under solar light irradiation.

Here, a novel method for synthesis of heterostructured TiO-MoO (MT) nanosheets photocatalyst by utilizing a facile electrochemical method and examined it's photocatalytic activity by the degradation of tetracycline hydrochloride (TCH), a model of organic pollutants, in the presence of peroxymonosulfate (PMS) under solar light irradiation (SL) was reported for the first time. The influence of several factors on the degradation efficiency including the initial concentration of TCH, solution pH, catalyst dosage, PMS concentration, and the existence of inorganic anions was explored. The MT-15/PMS system displayed a promising photocatalytic performance and up to 97% of TCH was degraded in 90 min the rate of the degradation reaction of MT-15/PMS was the highest (0.

Silver nanoparticles, nanoneedles and nanorings: impact of electromagnetic near-field on surface-enhanced Raman scattering.

The dimension of plasmonic nanostructures does matter in localizing electromagnetic (EM) field and improving surface-enhanced Raman scattering (SERS) activity. Zero-dimensional (0D), one-dimensional (1D) and two-dimensional (2D) plasmonic nanostructures are promising candidates to validate SERS enhancement and the mechanisms thereof. In this work, silver (Ag) nanoparticles (NPs), nanoneedles (NNs) and nanorings (NRs) have been considered to demonstrate the impact of EM near-field distributions on SERS of the corresponding 0D ( Ag-NPs), 1D ( Ag-NNs) and 2D ( Ag-NRs) nanostructures.

Single Atom Catalysts: An Overview of the Coordination and Interactions with Metallic Supports.

Catalyst utilization is a key economic factor in heterogeneous catalysis, particularly, when noble metals are used as the active phase. A huge saving on catalyst cost can be achieved with developing a single atomic layer of the active catalyst on a given cheap support. Besides the economic benefit, single atom catalysts (SACs) have also shown superior activity and selectivity relative to catalytic particles or nanoparticles; yet they are prone to aggregation and deactivation.

Strategies to Enhance ZnO Photocatalyst's Performance for Water Treatment: A Comprehensive Review.

Despite the photocatalytic organic pollutant degradation using ZnO started in 1910-1911, many challenges are still ahead, and several critical issues have to be addressed. Large band gap, and short life-time of photogenerated electrons and holes are critical issues negatively affect the photocatalytic activity of ZnO. Various approaches have been introduced to overcome these issues including intrinsic doping, extrinsic doping, and heterostructure.

Polymer-Templated Durable and Hydrophobic Nanostructures for Hydrogen Gas Sensing Applications.

A simple and hands-on one-step process has been implemented to fabricate polymer-templated hydrophobic nanostructures as hydrogen gas sensing platforms. Topographic measurements have confirmed irregular hills and dips of various dimensions that are responsible for creating air bubble pockets that satisfy the Cassie-Baxter state of hydrophobicity. High-resolution field-emission scanning electron microscopy (FESEM) has revealed double-layer structures consisting of fine microscopic flower-like structures of nanoscale petals on the top of base nanostructures.

Microstructure Evaluation and Impurities in La Containing Silicon Oxynitrides.

Oxynitride glasses are not yet commercialised primarily due to the impurities present in the network of these glasses. In this work, we investigated the microstructure and instinctive defects in nitrogen rich La-Si-O-N glasses. Glasses were prepared by heating a powder mixture of pure La metal, SiN, and SiO in a nitrogen atmosphere at 1650-1800 °C.

Clusters-based silver nanorings: An active substrate for surface-enhanced Raman scattering.

Plasmonic nanostructures, particularly irregular surfaces of ring-like silver (Ag) nanostructures are promising candidates in surface-enhanced Raman scattering (SERS) spectroscopy. In this work, clusters-based Ag nanorings have been fabricated and characterized as SERS-active substrates. The rim of the as-fabricated Ag nanorings was found neither discontinuous nor linear aggregation of nanoparticles.

Plasmonic Pollen Grain Nanostructures: A Three-Dimensional Surface-Enhanced Raman Scattering (SERS)-Active Substrate.

A new route has been developed to design plasmonic pollen grain-like nanostructures (PGNSs) as surface-enhanced Raman scattering (SERS)-active substrate. The nanostructures consisting of silver (Ag) and gold (Au) nanoparticles along with zinc oxide (ZnO) nanoclusters as spacers were found highly SERS-active. The morphology of PGNSs and those obtained in the intermediate stage along with each elemental evolution has been investigated by a high-resolution field emission scanning electron microscopy.

Zinc Oxide-Based Acetone Gas Sensors for Breath Analysis: A Review.

Acetone is one of the toxic, explosive, and harmful gases. It may cause several health hazard issues such as narcosis and headache. Acetone is also regarded as a key biomarker to diagnose several diseases as well as monitor the disorders in human health.

Fabrication and Characterization of Transparent and Scratch-Proof Yttrium/Sialon Thin Films.

Transparent and amorphous yttrium (Y)/Sialon thin films were successfully fabricated using pulsed laser deposition (PLD). The thin films were fabricated in three steps. First, Y/Sialon target was synthesized using spark plasma sintering technique at 1500 °C in an inert atmosphere.

Direct -Scheme CsO-BiO-ZnO Heterostructures as Efficient Sunlight-Driven Photocatalysts.

Limited light absorption, inefficient electron-hole separation, and unsuitable positions of conduction band bottom and/or valence band top are three major critical issues associated with high-efficiency photocatalytic water treatment. An attempt has been carried out here to address these issues through the synthesis of direct -scheme CsO-BiO-ZnO heterostructures via a facile, fast, and economic method: solution combustions synthesis. The photocatalytic performances are examined by the 4-chlorophenol degradation test under simulated sunlight irradiation.

Novel Green Biomimetic Approach for Synthesis of ZnO-Ag Nanocomposite; Antimicrobial Activity against Food-borne Pathogen, Biocompatibility and Solar Photocatalysis.

A simple, eco-friendly, and biomimetic approach using Thymus vulgaris (T. vulgaris) leaf extract was developed for the formation of ZnO-Ag nanocomposites (NCs) without employing any stabilizer and a chemical surfactant. T.