A Study on the Compressive Behavior of Additively Manufactured AlSi10Mg Lattice Structures.

The mechanical behavior of the metallic components fabricated by additive manufacturing (AM) technologies can be influenced by adjustments in their microstructure or by using specially engineered geometries. Manipulating the topological features of the component, such as incorporating unit cells, enables the production of lighter metamaterials, such as lattice structures. This study investigates the mechanical behavior of lattice structures created from AlSi10Mg, which were produced using the laser beam powder bed fusion (LB-PBF) process.

The Effects of Ozone Sterilization on the Chemical and Mechanical Properties of 3D-Printed Biocompatible PMMA.

Since ozone is highly corrosive, it can substantially affect the mechanical and chemical properties of the materials; consequently, it could affect the applicability of those materials in medical applications. The effect of ozone sterilization on the chemical and mechanical properties of additively manufactured specimens of biocompatible poly(methyl-methacrylate) was observed. FDM 3D-printed specimens of biocompatible PMMA in groups of five were exposed to high concentrations of ozone generated by corona discharge for different durations and at different ozone concentrations inside an enclosed chamber with embedded and calibrated ozone, temperature, and humidity sensors.

Experimental and Numerical Analysis of Fracture Mechanics Behavior of Heterogeneous Zones in S690QL1 Grade High Strength Steel (HSS) Welded Joint.

The heterogeneity of welded joints' microstructure affects their mechanical properties, which can vary significantly in relation to specific weld zones. Given the dimensional limitations of the available test volumes of such material zones, the determination of mechanical properties presents a certain challenge. The paper investigates X welded joint of S690QL1 grade high strength steel (HSS), welded with slightly overmatching filler metal.

Intrinsic Fatigue Limit and the Minimum Fatigue Crack Growth Threshold.

In the field of long-life fatigue, predicting fatigue lives and limits for mechanical components is crucial for ensuring reliability and safety. Fracture mechanics tools have enabled the estimation of fatigue lives for components with small cracks or defects. However, when dealing with defects larger than the microstructural characteristic size, estimating the fatigue resistance of a material requires determining the cyclic resistance curve for the defect-free matrix, which depends on knowledge of the material's intrinsic fatigue limit.

Fabrication of polypyrrole gas sensor for detection of NH using an oxidizing agent and pyrrole combinations: Studies and characterizations.

The organic polymer known as Polypyrrole (Ppy) is synthesized when pyrrole monomers are polymerized. Excellent thermal stability, superior electrical conductivity, and environmental stability are all characteristics of Polypyrrole. Chemical oxidative polymerization was used to synthesize Ppy using Ferric chloride (FeCl) as an oxidizing agent and surfactant CTAB in aqueous solution.

Nano-Mechanical Behavior of Ti6Al4V Alloy Manufactured Using Laser Powder Bed Fusion.

The microstructure of Ti6Al4V alloy, manufactured using laser powder bed fusion (L-PBF), is affected by process parameters and heat treatment. However, their influence on the nano-mechanical behavior of this widely applicable alloy is still unknown and scarcely reported. This study aims to investigate the influence of the frequently used annealing heat treatment on mechanical properties, strain-rate sensitivity, and creep behavior of L-PBF Ti6Al4V alloy.

The evolution of renewable energy environments utilizing artificial intelligence to enhance energy efficiency and finance.

The development of a country is inseparable from the material guarantee mainly based on energy, but energy is limited, which may restrict the sustainable development of the country. It is very necessary to accelerate the adoption of programs aimed at switching non-renewable energy sources to ones that are, and giving priority to improving renewable energy consumption and storage capabilities. From the experience of the G7 economies, the development of renewable energy (RE) is inevitable and urgent.

Effect of 3D-Printed PLA Structure on Sound Reflection Properties.

3D printing technique is currently one of the promising emerging technologies. It is used in many areas of human activity, including acoustic applications. This paper focuses on studying the sound reflection behavior of four different types of 3D-printed open-porous polylactic acid (PLA) material structures, namely cartesian, octagonal, rhomboid and starlit structures.

Productivity Enhancement by Prediction of Liquid Steel Breakout during Continuous Casting Process in Manufacturing of Steel Slabs in Steel Plant Using Artificial Neural Network with Backpropagation Algorithms.

Breakout is one of the major accidents that often arise in the continuous casting shops of steel slabs in Bokaro Steel Plant, Jharkhand, India. Breakouts cause huge capital loss, reduced productivity, and create safety hazards. The existing system is not capable of predicting breakout accurately, as it considers only one process parameter, i.

Yield Load Solutions for SE(B) Fracture Toughness Specimen with I-Shaped Heterogeneous Weld.

The objective of this work was to investigate the fracture behavior of a heterogeneous I-shaped welded joint in the context of yield load solutions. The weld was divided into two equal parts, using the metal with the higher yield strength and the metal with the lower yield strength compared to base metal. For both configurations of the I-shaped weld, one with a crack in strength in the over-matched part of the weld and one for a crack in the under-matched part of the weld, a systematic study of fracture toughness SE(B) specimen was carried out in which the crack length, the width of the weld and the strength mismatch factor for both weld metals were varied, and the yield loads were determined.

Estimation of Integral for Mismatched Welded Compact Tension Specimen.

The integral for the compact tension (CT) specimen is calculated using the estimation equation in ASTM E1457-15. This equation was developed based on the assumption of material homogeneity and is not applicable to a welded CT specimen. In this paper, a modified equation for estimating the integral for a welded compact tension (CT) specimen under creep conditions is proposed.

Effect of the Pore Shape and Size of 3D-Printed Open-Porous ABS Materials on Sound Absorption Performance.

Noise has a negative impact on our environment and human health. For this reason, it is necessary to eliminate excessive noise levels. This paper is focused on the study of the sound absorption properties of materials with open-porous structures, which were made of acrylonitrile butadiene styrene (ABS) material using additive technology.

Study of the Sound Absorption Properties of 3D-Printed Open-Porous ABS Material Structures.

Noise pollution is a negative factor that affects our environment. It is, therefore, necessary to take appropriate measures to minimize it. This article deals with the sound absorption properties of open-porous Acrylonitrile Butadiene Styrene (ABS) material structures that were produced using 3D printing technology.

Calculation of reaction forces in the boiler supports using the method of equivalent stiffness of membrane wall.

The values of reaction forces in the boiler supports are the basis for the dimensioning of bearing steel structure of steam boiler. In this paper, the application of the method of equivalent stiffness of membrane wall is proposed for the calculation of reaction forces. The method of equalizing displacement, as the method of homogenization of membrane wall stiffness, was applied.