Simulation of an Orthodontic System Using the Lingual Technique Based on the Finite Element Method.

The finite element method (FEM) is an advanced numerical technique that can be applied in orthodontics to study tooth movements, stresses, and deformations that occur during orthodontic treatment. It is also useful for simulating and visualizing the biomechanical behavior of teeth, tissues, and orthodontic appliances in various clinical scenarios. The objective of this research was to analyze the mechanical behavior of teeth, tissues, and orthodontic appliances in various clinical scenarios.

Assessment of Thermal Influence on an Orthodontic System by Means of the Finite Element Method.

The development of the finite element method (FEM) combined block polynomial interpolation with the concepts of finite difference formats and the variation principle. Because of this combination, the FEM overcomes the shortcomings of traditional variation methods while maintaining the benefits of current variation methods and the flexibility of the finite difference method. As a result, the FEM is an advancement above the traditional variation methods.

A Finite Element Method Study of Stress Distribution in Dental Hard Tissues: Impact of Access Cavity Design and Restoration Material.

The design of the access cavity is an important factor in endodontic treatment for the further evolution of the tooth. The objective of this study was to highlight the most favorable access cavity design (TrussAC, UltraAC, TradAC, CariesAC, ConsAC, RestoAC) based on the stress distribution on virtual models of mandibular molars. To achieve the objectives of the study, four series of virtual models of six molars were made.

A 68-Year-Old Man with Depression and Acute Renal Failure Due to Rhabdomyolysis Associated with Alcohol Intoxication While Taking Low-Dose Escitalopram: A Case Report.

BACKGROUND Rhabdomyolysis, an uncommon but recognized adverse effect of selective serotonin reuptake inhibitor (SSRI) antidepressants, can precipitate acute renal injury (AKI), especially when combined with risk factors such as alcohol consumption. This report describes a 68-year-old man with acute renal failure due to rhabdomyolysis associated with alcohol intoxication while taking low-dose escitalopram, an SSRI antidepressant. CASE REPORT The patient, with a history of bipolar affective disorder managed with escitalopram, presented with symptoms of general malaise, diarrhea, myalgias, and transient loss of consciousness following substantial ethanol consumption.

Orthodontic System Modeled and Simulated with the Lingual Technique to Assess Tooth Forces.

CBCT (cone beam computed tomography) is an imaging investigation that provides three-dimensional (3D) images of craniofacial structures. The purpose of this study is to determine the mechanical behavior of an orthodontic system where the lingual treatment technique was used in a 25-year-old female patient from whom a set of CBCT scans was used. CBCT images were processed through software programs such as Invesalius, Geomagic, and Solid Works, to create models containing virtual solids.

A Finite Element Method Study on a Simulation of the Thermal Behaviour of Four Methods for the Restoration of Class II Cavities.

The possibility of dental pulp damage during dental procedures is well known. According to studies, during finishing and polishing without cooling, temperatures of up to 140 °C or more can be generated. There are many studies that have analysed the influence of the finishing and polishing of fillings on the mechanical parameters, but the analysis of thermal parameters has led to uncertain results due to the difficulty of performing this in vivo.

Anticancer Potential of β-Carboline Alkaloids: An Updated Mechanistic Overview.

his comprehensive review is designed to evaluate the anticancer properties of β-carbolines derived from medicinal plants, with the ultimate goal of assessing their suitability and potential in cancer treatment, management, and prevention. An exhaustive literature survey was conducted on a wide array of β-carbolines including, but not limited to, harmaline, harmine, harmicine, harman, harmol, harmalol, pinoline, tetrahydroharmine, tryptoline, cordysinin C, cordysinin D, norharmane, and perlolyrine. Various analytical techniques were employed to identify and screen these compounds, followed by a detailed analysis of their anticancer mechanisms.

The potential roles of gossypol as anticancer agent: advances and future directions.

Gossypol, a polyphenolic aldehyde derived from cottonseed plants, has seen a transformation in its pharmaceutical application from a male contraceptive to a candidate for cancer therapy. This shift is supported by its recognized antitumor properties, which have prompted its investigation in the treatment of various cancers and related inflammatory conditions. This review synthesizes the current understanding of gossypol as an anticancer agent, focusing on its pharmacological mechanisms, strategies to enhance its clinical efficacy, and the status of ongoing clinical evaluations.

Effect of perinatal exposure to glyphosate and its mixture with 2,4-D and dicamba on rat dam kidney and thyroid function and offspring's health.

The increasing use of the herbicide mixture of glyphosate, dicamba and 2-4-D to deal with glyphosate-resistant weeds raises concerns regarding human health and environmental risks. This study aimed to evaluate the effects of developmental exposure to glyphosate and a herbicide mixture containing glyphosate, dicamba and 2-4-D on rat dams' kidney and thyroid function and offspring's health. Pregnant Wistar rats were exposed from day-6 of gestation till weaning to regulatory relevant doses of glyphosate corresponding to the European Union (EU) acceptable daily intake (ADI; 0.

Study on the Restoration of Class II Carious Cavities by Virtual Methods: Simulation of Mechanical Behavior.

The restoration of class II cavities is predominantly carried out with composite materials. Due to the high failure rate in restoring this type of cavity, composite materials with much-improved properties and new application techniques have been promoted. The study aimed to analyze the mechanical behavior of several topical composite materials (nanocomposites, nanohybrids and ormocer) using different application techniques.

Analysis of Temperatures Generated during Conventional Laser Irradiation of Root Canals-A Finite Element Study.

The success of endodontic treatment is dependent on the removal of bacteria. A modern strategy to reduce bacterial load is laser irradiation. During this procedure, there is a local increase in temperature with possible side effects.

Using the Finite Element Method to Determine the Odonto-Periodontal Stress for a Patient with Angle Class II Division 1 Malocclusion.

The finite element method (FEM) is a computational method that can solve all biomechanical problems, including the field of orthodontics. The purpose of this virtual experimental study is to determine the behavior of a real orthodontic system subjected to different systems of loads. To analyze the real orthodontic system, we studied the case of a 21-year-old female patient.

An Interpenetrating Polymer Network Hydrogel Based on Cellulose, Applied to Remove Colorant Traces from the Water Medium: Electrostatic Interactions Analysis.

The main objective of this work was the removal of eosin Y and green malachite from an aqueous medium by using a cellulose-based biodegradable interpenetrated network (IPN). The IPN was obtained by the sequenced synthesis method. In the first step, cellulose was crosslinked with epichlorohydrin (ECH).

Arrhythmias and Conduction Disturbances in Patients with Systemic Sclerosis-A Systematic Literature Review.

Systemic sclerosis (SSc) is an autoimmune disease characterized by skin and internal organ fibrosis and microvascular impairment, which can affect major organs, including the heart. Arrhythmias are responsible for approximately 6% of deaths in patients with SSc, and mainly occur due to myocardial fibrosis, which causes electrical inhomogeneity. The aim of this study was to determine the frequency of arrhythmias and conduction disturbances in SSc cohorts, and to identify the characteristics and risk factors associated with the occurrence of dysrhythmias in patients with SSc.

Contributions to the Study on the Effects of Incorrect Implantation of Knee Prostheses Depending on the Degree of Varus / Valgus.

Introduction: The human knee is one of the most complex human joints, by the number of components, by the stresses to which it is subjected, by the complicated spatial geometry of the components and by the existence of multiple contacts between different components.

Material And Method: A series of modern devices and equipment that were used for the three-dimensional reconstruction of the components of the analyzed systems.

Results: Also, the elements of a knee prosthesis were modeled in a parameterized virtual environment and six orthopedic systems were compared.

Post Placement and Restoration of Endodontically Treated Canines: A Finite Element Analysis Study.

The purpose of this study was to show the improved outcomes of restoring endodontically treated teeth with fiberglass posts compared to restorations using metal posts. In our study, we used the Finite Element Method (FEM), which is based on the principle that a physical model that supports a given load distributes the stress throughout its volume. We sought to assess what stress results in a tooth when it is restored using a fiberglass post compared to restoration using a metal post.

Decision of Anticoagulation in Nonvalvular Atrial Fibrillation in the Real World in the Non-Antivitamin K Anticoagulants Era.

Patients with nonvalvular atrial fibrillation (NVAF) have five times higher risk of stroke than the general population. Anticoagulation (ACO) in NVAF is a class I indication after assessing the CHA2DS2-VASc and HAS-BLED scores. However, in the real world, NVAF patients receive less ACO than needed due to patients' comorbidities that can be assessed by the Charlson comorbidity index (CCI).

Modeling and Simulating an Orthodontic System Using Virtual Methods.

Cone beam computed tomography (CBCT) is a modern imaging technique that uses X-rays to investigate the structures of the dento-maxillary apparatus and obtain detailed images of those structures. The aim of this study was to determine a functional mathematical model able to evaluate the elastic force intensity on each bracket and tube type element and the ways in which those components act on the orthodontic system being used. To analyze a real orthodontic system, we studied the case of a 13-year-old female patient.

About the Experimental and Virtual Analysis of Orthopedic Implant Systems for the Revision of the Hip Prosthesis with Morcellated Bone Graft and Reconstruction Net.

Introduction: Prosthesis loosening is an alteration of the function and position of a total hip prosthesis with reference to the initial surgical moment. The main mechanism unanimously accepted for aseptic prosthetic losses at the level of the cup is represented by the biological mechanism.

Material And Method: Experimental and virtual, interdisciplinary tools, techniques and methods were used to determine the behavior of the hip replacement prosthesis with the morcellated graft and the reconstruction net.

Role of in the triggering and evolution of hemorrhagic gastro-duodenal lesions.

The majority of studies concerning () are oriented towards the implication of infection with in processes that end in the formation of neoplasia, without assessing the impact of the bacterium in triggering acute gastroduodenal hemorrhagic episodes. The present study includes 166 patients with upper digestive hemorrhage, admitted to the ATI Clinic, the Gastroenterology Clinic or to the Surgery II Clinic of the County Emergency Clinical Hospital in Craiova, Romania between 2017 and 2019. All patients were monitored for evolution and received treatment according to current guidelines, and hemorrhagic lesions were biopsied.

Extracorporeal Septoplasty-A Well Proven Technique for Treatment of Crooked Noses.

Crooked noses (noses with complex septal and pyramidal deviations) are an important challenge for both plastic surgeons and otolaryngologists. Extracorporeal septoplasty, described by Gubisch constitutes an effective solution to this problem. The article describes a series of 7 cases (5 males and 2 females) in which this method was used during open rhinoseptoplasty.

Three-Dimensional Model of the Human Eye Development based on Computer Tomograph Images.

Unlabelled: The objective of this study was to obtain a virtual biomechanical three dimensional model of the human eye though a multidisciplinary collaboration between researchers in various medical and informational fields in order to reach a better understanding of the optical performance of the healthy and diseased eye.

Material And Method: In order to obtain the virtual model, we analyzed the CT and MRI images of six patients, aged between 21 and 80 years old, dating from February 2013 until January 2019. These scans totalized 4226 images.

Histological aspects of full-thickness skin grafts augmented with platelet-rich fibrin in rat model.

Background And Objectives: The restoration of the damaged tissue commences very early with a regulated sequence of biochemical events set into motion to repair the damage. While the understanding of this entire process is still incomplete, it has been established that platelets play a decisive role not only in hemostasis, but also in the wound healing process, through an abundance of growth factors and other signaling cytokines modulating the inflammatory response. To this end, we attempted to evaluate the effect of a platelet-rich biomaterial - platelet-rich fibrin (PRF) - in the augmentation of full-thickness skin grafts (FTSGs).

Histological findings from rat calvaria defect augmented with platelet-rich fibrin by using two consecutive periosteal incisions.

Background And Objectives: Platelet-rich fibrin (PRF) is a new generation of biomaterial that proved to be an effective tool in numerous clinical uses. This study aims at expanding the range effectiveness of PRF in promoting bone healing by histological evaluation.

Materials And Methods: We performed a pair of two calvaria defects on 35 Wistar rats.

Sepsis and identification of reliable biomarkers for postoperative period prognosis.

Sepsis is currently defined as the presence of organ dysfunction occurring as the result of a disturbed host response to a serious infection. Sepsis is one of the most common diseases, which cause mortality and a considerable absorber of healthcare resources. Despite progress in technology and improving knowledge of pathophysiology, the disease mechanism is still poorly understood.