3D Printed Strontium and Zinc Doped Hydroxyapatite Loaded PEEK for Craniomaxillofacial Implants.

In this study, Strontium (Sr) and Zinc (Zn) doped-HA nanoparticles were synthesized and incorporated into polyetheretherketone (PEEK) up to 30 wt.% and processed by a novel approach i.e.

Elastic Modulus and Flatwise (Through-Thickness) Tensile Strength of Continuous Carbon Fibre Reinforced 3D Printed Polymer Composites.

Additively manufactured composite specimens exhibit anisotropic properties, meaning that the elastic response changes with respect to orientation. Both in-plane and out-of-plane mechanical properties are important for designing purpose. Recent studies have characterised the in-plane performance.

Rapid paper based colorimetric detection of glucose using a hollow microneedle device.

The monitoring of blood glucose is a key aspect of diabetes care in limiting the negative effects of hyperglycaemia to both the microvasculature and macrovasculature. Self-monitoring of blood glucose (SMBG) gives an indication of blood glucose at a specific point in time and is recommended to be carried out four times daily. However, due to the inconvenience and associated pain of blood withdrawal, SMBG is often carried out less frequently than recommended or not at all.

Unraveling the cell-type dependent radiosensitizing effects of gold through the development of a multifunctional gold nanoparticle.

The radiosensitizing efficacy of gold is well established, however, there remain several significant barriers to the successful clinical translation of nano-sized gold particles (AuNPs). These barriers include: retaining stability in relevant biological sera, demonstrating effectiveness at clinically relevant AuNP concentrations and identifying the biological context where significant benefit is most likely to be achieved. Herein we have developed a AuNP preparation, stress-tested to provide effective protection from salt and serum mediated agglomeration.

Peptide functionalized gold nanoparticles: the influence of pH on binding efficiency.

We report herein on the synthesis of mixed monolayer gold nanoparticles (AuNPs) capped with both polyethylene glycol (PEG) and one of three peptides. Either a receptor-mediated endocytosis peptide, an endosomal escape pathway (H5WYG) peptide or the Nrp-1 targeting RGD peptide (CRGDK) labeled with FITC. All three peptides have a thiol containing cysteine residue which can be used to bind the peptides to the AuNPs.

Microplasma Processed Ultrathin Boron Nitride Nanosheets for Polymer Nanocomposites with Enhanced Thermal Transport Performance.

This Research Article reports on the enhancement of the thermal transport properties of nanocomposite materials containing hexagonal boron nitride in poly(vinyl alcohol) through room-temperature atmospheric pressure direct-current microplasma processing. Results show that the microplasma treatment leads to exfoliation of the hexagonal boron nitride in isopropyl alcohol, reducing the number of stacks from >30 to a few or single layers. The thermal diffusivity of the resulting nanocomposites reaches 8.

Gold nanoparticle surface functionalization: mixed monolayer versus hetero bifunctional peg linker.

To create a clinically relevant gold nanoparticle (AuNP) treatment, the surface must be functionalized with multiple ligands such as drugs, antifouling agents and targeting moieties. However, attaching several ligands of differing chemistries and lengths, while ensuring they all retain their biological functionality remains a challenge. This review compares the two most widely employed methods of surface cofunctionalization, namely mixed monolayers and hetero-bifunctional linkers.

A comparison of gold nanoparticle surface co-functionalization approaches using Polyethylene Glycol (PEG) and the effect on stability, non-specific protein adsorption and internalization.

To create clinically useful gold nanoparticle (AuNP) based cancer therapeutics it is necessary to co-functionalize the AuNP surface with a range of moieties; e.g. Polyethylene Glycol (PEG), peptides and drugs.

Barriers to hospital-based clinical adoption of point-of-care testing (POCT): A systematic narrative review.

Recent advances in areas such as biomarker discovery and microfluidic device fabrication have allowed clinical testing to be moved ever closer to the site of patient care. The development of a range of point-of-care testing (POCT) devices that seek to provide the clinician with diagnostic test results more rapidly offer the opportunity to enhance the quality of care for the individual patient and the population at large. However, there are indications that, notwithstanding advances in the technologies that underpin the utility of POCT, their clinical uptake and utilization is less than might be expected.

Gold nanoparticle surface functionalization: a necessary requirement in the development of novel nanotherapeutics.

With several gold nanoparticle-based therapies currently undergoing clinical trials, these treatments may soon be in the clinic as novel anticancer agents. Gold nanoparticles are the subject of a wide ranging international research effort with preclinical studies underway for multiple applications including photoablation, diagnostic imaging, radiosensitization and multifunctional drug-delivery vehicles. These applications require an increasingly complex level of surface modification in order to achieve efficacy and limit off-target toxicity.

Glutathione-mediated release of Bodipy® from PEG cofunctionalized gold nanoparticles.

Gold nanoparticles synthesized via sodium citrate reduction of chloroauric acid (HAuCl(4)) were functionalized with either various concentrations of thiol-terminated Bodipy(®) FL L-cystine (0.5, 1.0, 1.

The influence of solvent processing on polyester bioabsorbable polymers.

Solvent-based methods are commonly employed for the production of polyester-based samples and coatings in both medical device production and research. The influence of solvent casting and subsequent drying time was studied using thermal analysis, spectroscopy and weight measurement for four grades of 50 : 50 poly(lactic-co-glycolic acid) (PLGA) produced by using chloroform, dichloromethane, and acetone. The results demonstrate that solvent choice and PLGA molecular weight are critical factors in terms of solvent removal rate and maintaining sample integrity, respectively.