Improving the 3D Printability and Mechanical Performance of Biorenewable Soybean Oil-Based Photocurable Resins.

The general requirement of replacing petroleum-derived plastics with renewable resources is particularly challenging for new technologies such as the additive manufacturing of photocurable resins. In this work, the influence of mono- and bifunctional reactive diluents on the printability and performance of resins based on acrylated epoxidized soybean oil (AESO) was explored. Polyethylene glycol di(meth)acrylates of different molecular weights were selected as diluents based on the viscosity and mechanical properties of their binary mixtures with AESO.

Lignin as a High-Value Bioaditive in 3D-DLP Printable Acrylic Resins and Polyaniline Conductive Composite.

With increasing environmental awareness, lignin will play a key role in the transition from the traditional materials industry towards sustainability and Industry 4.0, boosting the development of functional eco-friendly composites for future electronic devices. In this work, a detailed study of the effect of unmodified lignin on 3D printed light-curable acrylic composites was performed up to 4 wt.

Printability Study of a Conductive Polyaniline/Acrylic Formulation for 3D Printing.

There is need for developing novel conductive polymers for Digital Light Processing (DLP) 3D printing. In this work, photorheology, in combination with Jacobs working curves, efficaciously predict the printability of polyaniline (PANI)/acrylate formulations with different contents of PANI and photoinitiator. The adjustment of the layer thickness according to cure depth values () allows printing of most formulations, except those with the highest gel point times determined by photorheology.

Application of liquid chromatography in polymer non-ionic antistatic additives analysis.

This article investigates the applicability of HPLC-UV, ultra performance LC-evaporative light-scattering detection (UPLC-ELSD), HPLC-ESI(+)-MS and HPLC-hybrid linear ion trap (LTQ) Orbitrap MS for the analysis of different non-ionic antistatic additives, Span 20, Span 60, Span 65, Span 80, Span 85 (sorbitan fatty acid esters), Atmer 129 (glycerol fatty acid ester) and Atmer 163 (ethoxylated alkylamine). Several alkyl chain length or different degrees of esterification of polyol derivatives can be present in commercial mixtures of these polymer additives. Therefore, their identification and quantification is complicated.

Liquid chromatography method to determine polyamines in thermosetting polymers.

A simple, robust and sensitive analytical method to determine three polyamines commonly used as hardeners in epoxy resin systems and in the manufacture of polyurethane is reported. The studied polyamines are: one tetramine, TETA (triethylenetetramine), and two diamines, IPDA (Isophorone diamine) and TCD-diamine (4,7-methano-1H-indene-5,?-dimethanamine, octahydro-). The latter has an incompletely defined structure, and, as far as we know, has not been previously determined by other methods.

Determination of antioxidants by solid-phase extraction method in aqueous food simulants.

An analytical method for the determination of specific migration levels of phenolic antioxidants and one phosphite antioxidant in the aqueous food simulants established by European legislation has been developed. This method involves solid-phase extraction (SPE) of the antioxidants with silica C(18) cartridge and their determination by liquid chromatography (LC) with diode-array detection. The achieved results in the studies of elution volume determination, breakthrough volume and accuracy are showed.

Principal components of phenolics to characterize red Vinho Verde grapes: anthocyanins or non-coloured compounds?

Phenolic profile of 10 different varieties of red "Vinho Verde" grapes (Azal Tinto, Borraçal, Brancelho, Doçal, Espadeiro, Padeiro de Basto, Pedral, Rabo de ovelha, Verdelho and Vinhão), from Minho (Portugal) were studied. Nine Flavonols, four phenolic acids, three flavan-3-ols, one stilben and eight anthocyanins were determined. Malvidin-3-O-glucoside was the most abundant anthocyanin while the main non-coloured compound was much more heterogeneous: catechin, epicatechin, myricetin-3-O-glucoside, quercetin-3-O-glucoside or syringetin-3-O-glucoside.

Solid-phase extraction versus matrix solid-phase dispersion: Application to white grapes.

The use of matrix solid-phase dispersion (MSPD) was tested to, separately, extract phenolic compounds and organic acids from white grapes. This method was compared with a more conventional analytical method previously developed that combines solid liquid extraction (SL) to simultaneously extract phenolic compounds and organic acids followed by a solid-phase extraction (SPE) to separate the two types of compounds. Although the results were qualitatively similar for both techniques, the levels of extracted compounds were in general quite lower on using MSPD, especially for organic acids.

Experimental design for extraction and quantification of phenolic compounds and organic acids in white "Vinho Verde" grapes.

An experimental design was applied for the optimization of extraction and clean-up processes of phenolic compounds and organic acids from white "Vinho Verde" grapes. The developed analytical method consisted in two steps: first a solid-liquid extraction of both phenolic compounds and organic acids and then a clean-up step using solid-phase extraction (SPE). Afterwards, phenolic compounds and organic acids were determined by high-performance liquid chromatography (HPLC) coupled to a diode array detector (DAD) and HPLC-UV, respectively.

Antioxidant content of and migration from commercial polyethylene, polypropylene, and polyvinyl chloride packages.

Antioxidants commonly used in polyolefins were studied in commercial food packages made of low- and high-density polyethylene (LDPE and HDPE), polypropylene (PP), polyvinylchloride (PVC), and polyethylene terephtalate (PET) and in a LDPE film extruded at the laboratory. The phenolic antioxidants BHA, BHT, AO 2246, AO 425, Ethanox 330, Irganox 1010, and Irganox 1076 were studied together with the phosphite Irgafos 168 and their two degradation products, phosphate and DBP. Antioxidants were extracted from polyolefins using microwave energy and analyzed using high-performance liquid chromatography (HPLC) to determine the antioxidant content in the diverse commercial films.

Determination of antioxidant migration levels from low-density polyethylene films into food simulants.

An analytical method for the determination of specific migration levels of phenolic antioxidants from low-density polyethylene (LDPE) into food simulant has been developed. The screening and response surface experimental designs to optimize the liquid-liquid extraction (LLE) of these antioxidants have been tested and the analyses have been carried out by reversed-phase high-performance liquid chromatography (HPLC) coupled with ultraviolet diode-array detector. The procedure developed has been applied to specific migration tests in different commercial LDPE films.