Multifunctional lignin-reinforced cellulose foam for the simultaneous removal of oils, dyes, and metal ions from water.

Pollutants emitted by industry pose an emerging threat to ecosystems, human health and native species, which has attracted global attention. At present, most of the biomass-based water remediation materials suffer from the poor mechanical properties, complexity of the modification process, single function and low adsorption capacity. Therefore, a high-strength lignin/cellulose foam absorbent (LCMA) with super-hydrophilic surface was developed for wastewater treatment by using lignin as the skeleton to crosslink cellulose through sol-gel method.

Synthesis, Performance Evaluation, and Adsorption-Dispersion Mechanism of Sulfonic Acid-Terminated Long Side Chain Polycarboxylate Superplasticizers.

Polycarboxylate superplasticizers (PCEs) achieve dispersion mainly via steric hindrance from poly(ether) side chains. However, long side chains may cause structural collapse. This study mitigates this issue by introducing sulfonic acid terminations to the long side chains, synthesizing sulfonic-terminated polycarboxylates (PCEPS).

Phase change material composites based on 3D lignin-derived porous carbon prepared by in-situ activation for efficient solar-driven energy conversion and storage.

Utilization of three-dimensional biomass-derived porous carbons can effectively address issues of easy leakage, low thermal conductivity, and weak photothermal conversion of phase change materials (PCMs). This enables the production of high-performance composites for solar-induced energy collection, conversion, and storage. In this study, hierarchical lignin-derived porous carbon (HLPC), microporous lignin-derived porous carbon (MILPC) and mesoporous lignin-derived porous carbon (MELPC) were prepared through high-temperature in-situ activation using lignosulphonate (LS) as a carbon precursor and CaCO, KOH and ZnCO as activators.

Preparation of Modified Polycarboxylate by Pyrrolidone for Using as a Dispersant in Cobalt Blue Nano-Pigment Slurry.

In this paper, N-vinylpyrrolidone was copolymerized with acrylic acid and itaconic acid by free radical polymerization, and a series of polyacrylic acid-co-itaconic acid-co-N-vinylpyrrolidone (PAIN) dispersants with different pyrrolidone ligand contents were synthesized and characterized. Then, the cobalt blue nano-pigment slurry (20 wt%) was prepared through a water-based grinding method, and the optimum grinding technology was explored and determined as follows: PAIN2 as a dispersant, a dispersant dosage of 10 wt%, and a grinding time of 480 min. According to this optimum grinding technology, the prepared pigment slurry had a significantly decreased agglomeration, the of which was 82 nm, and separately increased to 130 nm and 150 nm after heat storage for 3 and 7 days, exhibiting excellent heat storage stability.

DDR1 Drives Malignant Progression of Gastric Cancer by Suppressing HIF-1α Ubiquitination and Degradation.

The extracellular matrix (ECM) has been demonstrated to be dysregulated and crucial for malignant progression in gastric cancer (GC), but the mechanism is not well understood. Here, that discoidin domain receptor 1 (DDR1), a principal ECM receptor, is recognized as a key driver of GC progression is reported. Mechanistically, DDR1 directly interacts with the PAS domain of hypoxia-inducible factor-1α (HIF-1α), suppresses its ubiquitination and subsequently strengthens its transcriptional regulation of angiogenesis.

Fabrication and Optimization of Pickering Emulsion Stabilized by Lignin Nanoparticles for Curcumin Encapsulation.

To develop reversible pH-responsive emulsifiers of natural origin, alkali lignin (AL) was used to develop oil-in-water Pickering emulsions. AL was first modified to synthesize quaternized alkali lignin (QAL), which displayed pH-responsive properties and demonstrated solubility in both acidic and alkaline solutions. In contrast, QAL exhibited insolubility and formed particles in neutral solutions, thereby making it a suitable candidate for utilization as an emulsifier in doubly pH-responsive Pickering emulsions.

Stimuli-sensitive biomimetic nanoparticles for the inhibition of breast cancer recurrence and pulmonary metastasis.

Biomimetic nanoparticles represent a promising avenue for mitigating rapid clearance by the reticuloendothelial system (RES); however, current challenges include insufficient tumour targeting, suboptimal adhesion, and inadequate localized drug release within tumour regions. These shortcomings contribute to persistent contests, such as recurrence and pulmonary metastasis, even with advanced breast cancer therapies. Stimuli-sensitive drug release can furbish the membrane coated nanoparticles for their efficiency against the stated problems.

Multifunctional Super-Hydrophilic MXene/Biomass Composite Aerogel Evaporator for Efficient Solar-Driven Desalination and Wastewater Treatment.

Solar-driven interfacial evaporation is recognized as a sustainable and effective strategy for desalination to mitigate the freshwater scarcity issue. Nevertheless, the challenges of oil contamination, salt accumulation, and poor long-term stability of the solar desalination process limit its applications. Herein, a 3D biomass-based multifunctional solar aerogel evaporator is developed for water production with fabricated chitosan/lignin (CSL) aerogel as the skeleton, encapsulated with carbonized lignin (CL) particles and TiCTi (MXene) nanosheets as light-absorbing materials.

Thiocyanogen-modulated N, S Co-doped lignin hierarchical porous carbons for high-performance aqueous supercapacitors.

Constructing heteroatom-doped porous carbons with distinct charge storage properties is significant for high-energy-density supercapacitors, yet it remains a formidable challenge. Herein, we employed a thiocyanogen-modulated alkali activation strategy to synthesize N and S co-doped lignin hierarchical porous carbon (NSLHPC). In this process, thiocyanogen serves as a surface modulation mediator to substitute oxygen with nitrogen and sulfur species, while the combination of KOH activation and MgO template generates numerous nanopores within the carbon structure.

Preparations of 25 wt% of Pyraclostrobin Nanosuspension Concentrate (SC) Using Lignosulfonate-Based Colloidal Spheres to Improve Its Thermal Storage Stability.

Improving the thermal storage stability of nanosuspension concentrate (SC) prepared from low-melting-point pesticide is a recognized problem. In this work, using pyraclostrobin as the raw material, 25 wt% of pyraclostrobin nano-SC was prepared through a water-based grinding method, and the optimal grinding conditions were obtained as follows: a grinding time of 23 h, D-3911 as dispersant and a dispersant dosage of 12 wt%. The pyraclostrobin nano-SC D size prepared based on this best formula was 216 nm.

Ultrasonic-assisted synthesis of lignin-based ultrasmall silver nanoparticles for photothermal-mediated sterilization.

Lignin-based silver nanoparticles have been considered a promising antimicrobial material. However, it remains challenging to prepare ultra-small size silver nanoparticles sustainably with superior antibacterial performance. In this work, we modified ethanol-extracted lignin (EL) with carboxymethyl groups and further synthesized ultra-small particle size (3.

Aqueous amine enables sustainable monosaccharide, monophenol, and pyridine base coproduction in lignocellulosic biorefineries.

Thought-out utilization of entire lignocellulose is of great importance to achieving sustainable and cost-effective biorefineries. However, there is a trade-off between efficient carbohydrate utilization and lignin-to-chemical conversion yield. Here, we fractionate corn stover into a carbohydrate fraction with high enzymatic digestibility and reactive lignin with satisfactory catalytic depolymerization activity using a mild high-solid process with aqueous diethylamine (DEA).

H3K27 acetylation activated-PDLIM7 promotes castration-resistant prostate cancer progression by inducing O-Glycosylation of YAP1 protein.

Castration-resistant prostate cancer (CRPC) is a fatal disease that evolves from prostate cancer due to drug resistance after long-term androgen deprivation therapy. In this study, we aimed to find novel molecular targets for treating CRPC. Through peptidome, we screened out polypeptides dysregulated in the serum of CRPC patients.

A novel twin-grasper assisted mucosal inverted closure technique for closing large artificial gastric mucosal defects.

Background: Large artificial gastric mucosal defects are always left unclosed for natural healing due to technique difficulties in closure. This study aims to evaluate the feasibility and safety of a new Twin-grasper Assisted Mucosal Inverted Closure (TAMIC) technique in closing large artificial gastric mucosal defects.

Methods: Endoscopic submucosal dissection (ESD) was performed in fifteen pigs to create large gastric mucosal defects.

The Role of Vasodilator-stimulated Phosphoproteins in the Development of Malignant Tumors.

Vasodilator-stimulated phosphoprotein (VASP) is an actin-binding protein that includes three structural domains: Enabled/VASP homolog1 (EVH1), EVH2, and proline-rich (PRR). VASP plays an important role in various cellular behaviors related to cytoskeletal regulation. More importantly, VASP plays a key role in the progression of several malignant tumors and is associated with malignant cell proliferation, invasion, and metastasis.

Full biomass-based multifunctional flocculant from lignin and cationic starch.

Flocculation is a common process for wastewater treatment. However, the most commonly used organic synthetic flocculants such as polyacrylamide are petroleum-based. In this work, biomass lignin was grafted with cationic starch to synthesize low-cost, green and fully biomass-based multifunctional flocculants.

Enhancing Pollutant Mineralization through Organic-Inorganic Defect-Transit Dual S-scheme with a Robust Internal Electric Field.

Achieving superior photomineralization of pollutants relies on a rational design of a dual S-scheme with a robust internal electric field (IEF). In this study, to tackle the low mineralization rate in type-II In O /In S (IO/IS) systems, an organic-inorganic dual S-scheme In O /PDI/In S (IO/PDI/IS) nanostructured photocatalyst is synthesized via a method combining solvent-induced self-assembly and electrostatic forces. Due to the unique energy band position and strong IEF, the photoinduced defect-transit dual S-scheme IO/PDI/IS facilitates the degradation of lignin and antibiotics.

Preparation, characterization, and adsorption performance of porous polyamine lignin microsphere.

In this study, a porous polyamine lignin microsphere (PPALM) was prepared through the inverse suspension polymerization combined with freeze-drying, during which sodium lignosulfonate and polyetheramine (PEA) were crosslinked with epichlorohydrin (ECH) as the cross-linker. By adjusting the amount of ECH and PEA, the optimized PPALM exhibited suitable crosslinking degree, ensuring a balance of framework flexibility and rigidity, thereby facilitating the formation of abundant and fine pores. PPALM demonstrated good mechanical properties comparable to commercial sulfonated polystyrene cationic resin, with a porosity of 61.

"Rigid-Flexible" Anisotropic Biomass-Derived Aerogels with Superior Mechanical Properties for Oil Recovery and Thermal Insulation.

Aerogels with low density, high mechanical strength, and excellent elasticity have a wide potential for applications in wastewater treatment, thermal management, and sensors. However, the fabrication of such aerogels from biomass materials required complex preparation processes. Herein, a sustainable and facile strategy was reported to construct lignin/cellulose aerogels (LCMA) with three-dimensional interconnected structures by introducing homologous lignin with a polyphenyl propane structure as a structural enhancer through a top-down directional freezing approach, prompting a 2036% enhancement in compressive modulus and an 8-12-fold increase in oil absorption capacity.

Unveiling the role of long-range and short-range forces in the non-productive adsorption between lignin and cellulases at different temperatures.

Quantitatively understanding of interaction mechanism between lignin and cellulases is essential for the efficient improvement of lignocellulose enzymatic hydrolysis. However, the individual contribution of multiple forces between lignin and cellulases to the non-productive adsorption of enzymes still remains deeply ambiguous, especially in situations of near enzymatic hydrolysis temperatures. Herein, atomic force microscopy (AFM) and computational simulations were utilized to quantitatively analyze the intermolecular forces between lignin and enzyme at 25 °C and 40 °C.

Preparation of a new gel-type lignin-based cationic adsorption resin for efficient removal of Ca from aqueous solutions.

Presently, most studies on modified lignin focused on the adsorption to heavy metal cations, but rarely to Ca in hard water. Therefore, this work prepared a new gel-type lignin-based cationic adsorption resin (E-LSAF) through the crosslinking and curing of alkali lignin grafted by sodium sulfite sulfonated acetone to remove Ca in water. Under the determined optimum synthesis conditions, E-LSAF with a highest sulfonic group content of 1.