Publications by authors named "Dongdong Wen"

Herein, we proposed and demonstrated a novel approach of combining electrokinetics (EK)-assisted delivery of persulfate (PS) and ultrasound-induced thermal activation of PS and release of heavy metals, to synchronously remove organic pollutants and heavy metals from soil. Results showed that in tested soil, the mass transfer efficiency of PS induced by electromigration was approximately 3.36 times that by electroosmotic flow and 1416 times that by diffusion.

View Article and Find Full Text PDF

Herein, we proposed and proved a novel strategy that enhanced the delivery of persulfate (PS) to soil by electrokinetics (EK), and then applying a pulsed direct current (DC) electric field thermally activated the PS in situ, and synchronously promoted PS plume mixing, contaminants-free radicals reaction and continued to replenish PS to the soil, to achieve efficient degradation of contaminants in low permeability zones. Results showed that transport rate of PS in tested soil by EK was approximately 12.3 times than diffusion.

View Article and Find Full Text PDF

Delivering persulfate (PS) efficiently into clay is an unsolved challenge. This study proposes a novel strategy with enhanced electrokinetically -delivery PS into clay by using PS for continuously flushing cathode to inhibit water electrolysis at cathode electrode. On this basis, a novel approach of heating soil by alternating current (AC) was used to thermally activate PS in situ.

View Article and Find Full Text PDF

Pollution in soil by petroleum hydrocarbon has become a global environmental problem. The bioremediation of petroleum hydrocarbon-contaminated soil was enhanced with the combination of an isolated indigenous bacterial consortium and biosurfactant. The biodegradation efficiency of total petroleum hydrocarbon (TPH) was increased from 12.

View Article and Find Full Text PDF

The soil contaminated by inorganic contaminants including heavy metals, radioactive elements and salts has been posing risks for human health and ecological environment, which has been widely paid attention in recent years. The electrokinetic remediation (EKR) technology is recognized as the most potential separation technology, which is commonly used to clean sites that are contaminated with organic and inorganic contaminants. It is the most suitable remediation technology for low permeability porous matrices.

View Article and Find Full Text PDF

Bioremediation is considered a cost-effective and environmentally sound method for degradation of petroleum hydrocarbons in contaminated soils. This study investigated the effects of biosurfactant alkyl polyglycosides (APG) on enhanced biodegradation of petroleum hydrocarbon-contaminated soils using Sphingomonas changbaiensis and Pseudomonas stutzeri and explored the mechanism responsible for the enhanced petroleum hydrocarbon degradation. To accomplish this, the following treatments were evaluated: (1) bioaugmentation with Sphingomonas changbaiensis; (2) bioaugmentation with Pseudomonas stutzeri; (3) a combination of Sphingomonas changbaiensis and APG; and (4) a combination of Pseudomonas stutzeri and APG.

View Article and Find Full Text PDF

Decabromodiphenyl ether (BDE209) is a typical soil contaminant released from e-waste recycling sites (EWRSs). Electrokinetics (EK) has been considered as an excellent treatment technology with a promising potential to effectively remove organic pollutants in soil. In this study, the treatment of BDE209-polluted soil by EK was explored.

View Article and Find Full Text PDF

Electrode corrosion and salt crystallization are important challenges that restrict the engineering application of electrokinetic technology. In the present study, using stainless steel as an electrode, and deionized water (DW), citric acid (CA) and polyaspartic acid (PASP) as electrolytes, Pb/Cu-contaminated soil was remediated by electrokinetic. All of the EK experiments were conducted in a 2 L soil cell reactor with a moisture level of about 35% blended with 1000 mg·g of Pb and 778 mg·g of Cu under a constant voltage gradient (1 V·cm, 2 V·cm) for 150 h.

View Article and Find Full Text PDF

Typically, the Electromechanical Impedance (EMI) technique does not use an analytical model for basic damage identification. However, an accurate model is necessary for getting more information about any damage. In this paper, an EMI model is presented for predicting the electromechanical impedance of a cracked beam structure quantitatively.

View Article and Find Full Text PDF

To study the reasons and possibly solutions for missed diagnosis of duodenal injury. METHOD The clinical records were retrospectively analyzed in 9 cases of missed diagnosis of duodenal injury treated in our hospital in the year 1992 to 2002. RESULTS Of the 15 cases of duodenal injury, missed diagnoses occurred in 9 cases.

View Article and Find Full Text PDF