Impact of Conventional and Laser-Assisted Machining on the Microstructure and Mechanical Properties of Ti-Nb-Cr-V-Ni High-Entropy Alloy Fabricated with Directed Energy Deposition.

The high-entropy alloy (HEA) has recently attracted significant interest due to its novel alloy design concept and exceptional mechanical properties, which may exhibit either a single or multi-phase structure. Specifically, refractory high-entropy alloys (RHEA) composed of titanium, niobium, and nickel-based HEA demonstrate remarkable mechanical properties at elevated temperatures. Additive manufacturing (AM), specifically Direct Energy Deposition (DED), is efficient in fabricating high-entropy alloys (HEA) owing to its fast-cooling rates, which promote uniform microstructures and reduce defects.

A Rare Presentation of IgG4-Related Sinusitis With Chronic Nasal Obstruction and Headache: A Case Report and Literature Review.

IgG4-related disease (IgG4-RD) is a systemic inflammatory condition characterized by tissue infiltration with IgG4-positive plasma cells and a tendency to form mass-like lesions in various organs. IgG4-related sinusitis, although a relatively rare manifestation of IgG4-RD, significantly impacts the paranasal sinuses. A 52-year-old man presented with persistent rhinorrhea, nasal obstruction, and headaches.

Effects of Mo Addition on Microstructure and Corrosion Resistance of CrCoNiFeMo High-Entropy Alloys via Directed Energy Deposition.

Highly entropy alloys (HEAs) are novel materials that have great potential for application in aerospace and marine engineering due to their superior mechanical properties and benefits over conventional materials. NiCrCoFe, also referred to as Ni-based HEA, has exceptional low-temperature strength and microstructural stability. However, HEAs have limited corrosion resistance in some environments, such as a 3.

Investigation of Dielectric, Mechanical, and Thermal Properties of Epoxy Composites Embedded with Quartz Fibers.

Polymer matrix wave transparent composites are used in a variety of high-speed communication applications. One of the applications of these involves making protective enclosures for antennas of microwave towers, air vehicles, weather radars, and underwater communication devices. Material performance, structural, thermal, and mechanical degradation are matters of concern as advanced wireless communication needs robust materials for radomes that can withstand mechanical and thermal stresses.

A Review of Solar-Coupled Phase Change Materials in Buildings.

Buildings use a significant percentage of the total energy consumed worldwide. Striving for energy conservation within buildings is of prime concern for researchers. Hence, scientists are aggressively exploring new energy storage and supply methods to reduce exorbitantly fluctuating energy demands and increase the share of renewable energy in building energy consumption.

Biomaterials as Implants in the Orthopedic Field for Regenerative Medicine: Metal versus Synthetic Polymers.

Patients suffering bone fractures in different parts of the body require implants that will enable similar function to that of the natural bone that they are replacing. Joint diseases (rheumatoid arthritis and osteoarthritis) also require surgical intervention with implants such as hip and knee joint replacement. Biomaterial implants are utilized to fix fractures or replace parts of the body.

Miniaturized Rapid Electrochemical Immunosensor Based on Screen Printed Carbon Electrodes for Detection.

In 2019, over 21% of an estimated 10 million new tuberculosis (TB) patients were either not diagnosed at all or diagnosed without being reported to public health authorities. It is therefore critical to develop newer and more rapid and effective point-of-care diagnostic tools to combat the global TB epidemic. PCR-based diagnostic methods such as Xpert MTB/RIF are quicker than conventional techniques, but their applicability is restricted by the need for specialized laboratory equipment and the substantial cost of scaling-up in low- and middle-income countries where the burden of TB is high.

Wearable Healthcare Monitoring Based on a Microfluidic Electrochemical Integrated Device for Sensing Glucose in Natural Sweat.

Wearable sweat sensors offer the possibility of continuous real-time health monitoring of an individual at a low cost without invasion. A variety of sweat glucose sensors have been developed thus far to help diabetes patients frequently monitor blood glucose levels through sweat glucose as a surrogate marker. The present study demonstrates the development and characterization of a three-dimensional paper-based microfluidic electrochemical integrated device (3D PMED) for measuring glucose concentration in sweat in real-time via simple, non-invasive, capillary-action-based sample collection.

Reverse Offset Printed, Biocompatible Temperature Sensor Based on Dark Muscovado.

A reverse-offset printed temperature sensor based on interdigitated electrodes (IDTs) has been investigated in this study. Silver nanoparticles (AgNPs) were printed on a glass slide in an IDT pattern by reverse-offset printer. The sensing layer consisted of a sucrose film obtained by spin coating the sucrose solution on the IDTs.

Optimization of Wire Electric Discharge Machining (WEDM) Process Parameters for AISI 1045 Medium Carbon Steel Using Taguchi Design of Experiments.

With the growth of the manufacturing industry, the demand for alloy materials with high hardness, toughness, and impact strength has increased. Since products from such alloy materials are extremely difficult to manufacture with high accuracy and reduced surface roughness using traditional machining techniques, wire electric discharge machining can be used to machine such complex parts with more precision. In this case-study-based research, machining factors such as current, pulse-on time, and voltage are studied to determine their effects on the material removal rate for AISI 1045 medium carbon steel.

Magnetic, Electrical, and Physical Properties Evolution in FeO Nanofiller Reinforced Aluminium Matrix Composite Produced by Powder Metallurgy Method.

An investigation into the addition of different weight percentages of FeO nanoparticles to find the optimum wt.% and its effect on the microstructure, thermal, magnetic, and electrical properties of aluminum matrix composite was conducted using the powder metallurgy method. The purpose of this research was to develop magnetic properties in aluminum.

Flow Behavior of AA5005 Alloy at High Temperature and Low Strain Rate Based on Arrhenius-Type Equation and Back Propagation Artificial Neural Network (BP-ANN) Model.

To realize the purpose of energy saving, materials with high weight are replaced by low-weight materials with eligible mechanical properties in all kinds of fields. Therefore, conducting research works on lightweight materials under specified work conditions is extremely important and profound. To understand the relationship of aluminum alloy AA5005 among flow stress, true strain, strain rate, and deformation temperature, hot isothermal tensile tests were conducted within the strain rate range 0.

Constitutive Model Parameter Identification Based on Optimization Method and Formability Analysis for Ti6Al4V Alloy.

Titanium alloy is widely applied in aerospace, medical, shipping and other fields due to its high specific strength and low density. The purpose of this study was to analyze the formability of Ti6Al4V alloys at elevated temperatures. An accurate constitutive model is the basic condition for accurately simulating the plastic forming of materials, and it is an important basis for optimizing the parameters of the hot forging forming process.

The Parameters Identification of High-Temperature Constitutive Model Based on Inverse Optimization Method and 3D Processing Map of Cr8 Alloy Steel.

As a novel kind of cold roller steel, Cr8 alloy steel has the characteristics of high hardness, high wear resistance and good toughness, which can effectively prolong the service life of the roller that is an important part of the steel rolling mill. How to accurately define the constitutive model parameters of metal materials is the major problem, because it seriously affects the accuracy of numerical simulation results of the roller hot forming process. In the study of Cr8 alloy steel's thermal deformation behavior of the present paper, the high temperature compression test was done on a Gleebel-1500D thermal/force simulation testing machine.

Design and Mechanical Compatibility of Nylon Bionic Cancellous Bone Fabricated by Selective Laser Sintering.

In order to avoid the stress shielding phenomenon in orthopedic bionic bone implantation, it is necessary to consider the design of mechanical compatible implants imitating the host bone. In this study, we developed a novel cancellous bone structure design method aimed at ensuring the mechanical compatibility between the bionic bone and human bone by means of computer-aided design (CAD) and finite element analysis technology (specifically, finite element modeling (FEM)). An orthogonal lattice model with volume porosity between 59% and 96% was developed by means of CAD.

Formability and Failure Evaluation of AA3003-H18 Sheets in Single-Point Incremental Forming Process through the Design of Experiments.

The single-point incremental forming process (SPIF) is one of the emerging manufacturing methods because of its flexibility in producing the desired complex shapes with higher formability at low-cost compared to traditional sheet forming methods. In this research work, we experimentally investigate the forming process to determine the influence of process parameters and their contribution to enhancing the formability without causing a fracture by combining the design of experiments (DOE), grey relational analysis (GRA), and statistical analysis of variance (ANOVA). The surface morphology and the energy dispersive X-ray spectroscopy (EDS) method are used to perform elemental analysis and examine the formed parts during three forming stages.

Experimental and Numerical Investigation of AA5052-H32 Al Alloy with U-Profile in Cold Roll Forming.

The cold roll forming process is broadly used to produce a specific shape of cold-roll formed products for their applications in automobiles, aerospace, shipbuilding, and construction sectors. Moreover, a proper selection of strip thickness and forming speed to avoid fracture is most important for manufacturing a quality product. This research aims to investigate the presence of longitudinal bow, the reason behind flange height deviation, spring-back, and identification of thinning location in the cold roll-forming of symmetrical short U-profile sheets.

Correction: Murugesan, M., et al. Johnson Cook Material and Failure Model Parameters Estimation of AISI-1045 Medium Carbon Steel for Metal Forming Applications. 2019, , 609.

The author wishes to make the following corrections to this paper [...

Author Correction: Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes.

An amendment to this paper has been published and can be accessed via a link at the top of the paper.

On the Vibrations and Stability of Moving Viscoelastic Axially Functionally Graded Nanobeams.

In this article, size-dependent vibrations and the stability of moving viscoelastic axially functionally graded (AFG) nanobeams were investigated numerically and analytically, aiming at the stability enhancement of translating nanosystems. Additionally, a parametric investigation is presented to elucidate the influence of various key factors such as axial gradation of the material, viscosity coefficient, and nonlocal parameter on the stability boundaries of the system. Material characteristics of the system vary smoothly along the axial direction based on a power-law distribution function.

Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory.

Over the last few years, some novel researches in the field of medical science made a tendency to have a therapy without any complications or side-effects of the disease with the aid of prognosis about the behaviors of the substructure living biological cell. Regarding this issue, nonlinear frequency characteristics of substructure living biological cell in axons with attention to different size effect parameters based on generalized differential quadrature method is presented. Supporting the effects of surrounding cytoplasm and MAP Tau proteins are considered as nonlinear elastic foundation.

Dynamic response of the nonlocal strain-stress gradient in laminated polymer composites microtubes.

This study presents the frequency analysis of a size-dependent laminated polymer composite microtube using a nonlocal strain-stress gradient (NSG) model. By applying energy methods (known as Hamilton's principle), the motion equations of the laminated micro tube composites are developed. The thermodynamic equations of the laminated microtube are based on first-order shear deformation theory (FSDT), and a generalized differential quadrature method (GDQM) is employed to find the model for the natural frequencies.

Two flow stress models for describing hot deformation behavior of AISI-1045 medium carbon steel at elevated temperatures.

In materials processing, practical understanding of materials behavior at elevated temperatures and high strain rates is necessary for modeling the real system behavior. The tensile deformation behavior of AISI-1045 steel material is investigated at deformation temperatures (923-1223 K) and strain rates (0.05-1.

Johnson Cook Material and Failure Model Parameters Estimation of AISI-1045 Medium Carbon Steel for Metal Forming Applications.

Consistent and reasonable characterization of the material behavior under the coupled effects of strain, strain rate and temperature on the material flow stress is remarkably crucial in order to design as well as optimize the process parameters in the metal forming industrial practice. The objective of this work was to formulate an appropriate flow stress model to characterize the flow behavior of AISI-1045 medium carbon steel over a practical range of deformation temperatures (650⁻950 ∘ C) and strain rates (0.05⁻1.

An Aneurysmal Bone Cyst in the Skull Base.

An aneurysmal bone cyst (ABC) is believed to be attributable to intraosseous circulatory disturbance. An ABC is a vascular tumor of the bone caused by bony expansion after partial vascular occlusion and congestion. Most ABCs are found in adolescents (approximately 75% of ABCs are observed in patients under 20 years of age).